First Impressions of Canik Non-Optic Ready Pistols Plate A Optic Base
The Canik Non-Optic Ready Pistols Plate A Optic Base offers a solution for those who own Canik pistols not originally designed for optics but want to venture into the world of red dot sights. This adapter interface promises to bridge the gap, allowing shooters to mount a Shield RMS or RMSc footprint optic. The appeal lies in its potential to breathe new life into older Canik models, enhancing their versatility and accuracy.
I’ve always been a proponent of red dot sights on pistols, appreciating the faster target acquisition and improved accuracy they offer. Having recently acquired a used Canik TP9SF, a fantastic pistol but lacking an optic cut, I was keen to explore options for adding a red dot. I needed a reliable and secure mounting solution that wouldn’t compromise the pistol’s balance or functionality.
Upon receiving the Canik Non-Optic Ready Pistols Plate A Optic Base, I was immediately impressed by its solid construction and clean black finish. The adapter felt robust, inspiring confidence that it could withstand the rigors of regular use. Compared to some universal optic adapter plates I’ve encountered, this one seemed specifically designed for Canik pistols, promising a better fit.
There are other aftermarket adapter plates available, some even cheaper. However, the Canik name carries weight in the firearms community, suggesting a higher standard of quality and compatibility. Plus, the Plate A’s compatibility with the Shield RMS/RMSc footprint was exactly what I needed. My initial excitement was tempered by a little apprehension – would it truly be a drop-in fit, and would it hold zero reliably?
Real-World Testing: Putting Canik Non-Optic Ready Pistols Plate A Optic Base to the Test
First Use Experience
My first outing with the Canik Non-Optic Ready Pistols Plate A Optic Base took place at my local outdoor shooting range. Installation was straightforward, requiring only a few minutes and basic tools. I attached a Shield RMSc optic to the plate and then secured the plate to my Canik TP9SF.
The plate felt solid during the initial test, even after a couple of hundred rounds. The red dot sight co-witnessed perfectly with my iron sights. There were no hiccups during installation, and no movement was detected.
Extended Use & Reliability
After several range trips and approximately 500 rounds fired with the Canik Non-Optic Ready Pistols Plate A Optic Base installed, I can confidently say it’s a worthwhile addition. The plate has held up admirably, showing no signs of loosening or shifting. There is consistent reliability.
Despite consistent use, there is no noticeable wear and tear. I clean the pistol and adapter plate after each range session, a process that is quick and easy. The Canik Non-Optic Ready Pistols Plate A Optic Base has significantly improved my shooting experience compared to using iron sights alone.
Breaking Down the Features of Canik Non-Optic Ready Pistols Plate A Optic Base
Specifications
- Manufacturer: Canik provides this optic base adapter interface.
- Red Dot Sights-Footprint: RMS, confirming its compatibility with a range of popular red dot sights.
- Optic Cut: Shield RMS, Shield RMSc, ensuring a secure and precise fit for these specific optics.
- Color: Black, matching the aesthetics of most Canik pistols.
- Gun Model: Canik TP9v2, Canik TP9SFT, Canik TP9DA, Canik TP9SFL, Canik TP9SF, Canik TP9SA; defines the range of compatible Canik pistol models.
- Gun Make: Canik, reinforcing the adapter’s specific design for Canik firearms.
- Gun Type: Pistol, clarifying the intended application of the adapter.
These specifications are important because they guarantee compatibility with my Canik TP9SF and the Shield RMSc optic I intended to use. The specific fit eliminates the guesswork and potential instability associated with universal adapter plates.
Performance & Functionality
The Canik Non-Optic Ready Pistols Plate A Optic Base performs exactly as intended: It allows users to securely mount a Shield RMS/RMSc footprint red dot sight on non-optic ready Canik pistols. The adapter provides a stable platform for the optic, ensuring consistent zero retention. The adapter is easy to use and works as intended.
The plate’s main strength is its compatibility with a range of Canik models and the Shield RMS/RMSc footprint. The only real weakness is its limited compatibility; it won’t work with other optic footprints or Canik models like the TP9 Elite Combat or SFx. It meets my expectations.
Design & Ergonomics
The Canik Non-Optic Ready Pistols Plate A Optic Base boasts a low-profile design that minimizes bulk and maintains the pistol’s balance. The adapter’s build quality is excellent, using durable materials that instill confidence.
The adapter does not impact the ergonomics of the pistol and there is no significant learning curve required. It’s a simple, functional design that prioritizes usability.
Durability & Maintenance
Given its solid construction and the quality of materials used, the Canik Non-Optic Ready Pistols Plate A Optic Base is expected to last for years with proper care. Regular cleaning and inspection are all that’s needed to maintain it.
The adapter is easy to maintain. The durable materials mean it can hold up against some wear and tear.
Accessories and Customization Options
The Canik Non-Optic Ready Pistols Plate A Optic Base package includes only the adapter plate itself. The adapter is compatible with any Shield RMS or RMSc footprint red dot sight.
The adapter is not designed to work with other accessories or modifications. It’s a purpose-built solution for a specific need.
Pros and Cons of Canik Non-Optic Ready Pistols Plate A Optic Base
Pros
- Enables mounting of Shield RMS/RMSc optics on non-optic ready Canik pistols.
- Solid construction and durable materials ensure long-lasting performance.
- Maintains a low-profile design, minimizing bulk and preserving pistol balance.
- Easy installation requires only basic tools and minimal time.
- Provides a stable and secure platform for the optic, ensuring consistent zero retention.
Cons
- Limited compatibility; only works with Shield RMS/RMSc footprint optics.
- Not compatible with all Canik pistol models (e.g., TP9 Elite Combat, SFx).
Who Should Buy Canik Non-Optic Ready Pistols Plate A Optic Base?
The Canik Non-Optic Ready Pistols Plate A Optic Base is perfect for Canik TP9v2, TP9SFT, TP9DA, TP9SFL, TP9SF, and TP9SA owners who want to upgrade their pistol with a red dot sight but do not have an optic-ready slide. This product is ideal for competitive shooters looking for a speed advantage. It’s also great for those who appreciate the benefits of red dots.
Anyone with a Canik model not listed as compatible or those wanting to use a red dot sight with a different footprint should avoid this product. There are no must-have accessories or modifications required to use the Canik Non-Optic Ready Pistols Plate A Optic Base.
Conclusion on Canik Non-Optic Ready Pistols Plate A Optic Base
The Canik Non-Optic Ready Pistols Plate A Optic Base is a well-designed and effective solution for adding a red dot sight to compatible non-optic ready Canik pistols. Its solid construction, ease of installation, and secure optic mounting make it a worthwhile investment. The price of $69.19 is justified by the quality and functionality it provides.
I would definitely recommend the Canik Non-Optic Ready Pistols Plate A Optic Base to anyone looking to upgrade their non-optic ready Canik pistol with a Shield RMS/RMSc footprint red dot sight. It’s a reliable and affordable way to enhance your shooting experience. If you are on the fence, I highly suggest that you give it a shot.