Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings Review

First Thoughts on the Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings

As a seasoned outdoor and tactical gear specialist with over a decade of experience, I’ve mounted my fair share of scopes. Many times I’ve encountered rings that claim to be “tactical” but fail to deliver under pressure. This led me to the Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings, hoping to find a reliable and robust mounting solution.

After years of struggling with scope rings that either wouldn’t hold zero or were simply too flimsy for serious use, I sought a set that could withstand the recoil of larger caliber rifles. I needed rings that wouldn’t slip, shift, or require constant re-tightening – a common issue with cheaper alternatives. I was looking for unwavering reliability.

Upon unboxing the Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings, the immediate impression was one of solid construction. The matte black finish was even and clean, suggesting a high level of manufacturing precision. The weight felt substantial, indicating the use of quality materials, and the overall design exuded a sense of ruggedness.

Compared to some of the lightweight aluminum rings I’ve used in the past, these Burris rings felt considerably more robust. I was specifically choosing these over Leupold PRW rings due to the six-screw design that seemed to offer more holding power. I also considered some of the cheaper options from UTG, but I was looking for a known quantity here.

Initially, I was cautiously optimistic. They looked the part, but the real test would be in the field. I held my breath for the range.

Real-World Testing: Putting Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings to the Test

First Use Experience

My first test for the Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings was at my local shooting range. I mounted a M-TAC 3.5-10×44 scope onto my AR-10, which features floating hand rails. The AR-10 is known for producing significant recoil.

The rings performed flawlessly, even after multiple magazines of .308 Winchester. There were no signs of slippage or movement whatsoever. Mounting was easy and straightforward using the included hardware.

I experienced heavy rain during one of my initial range sessions, and the rings showed no signs of corrosion or finish degradation. The solid construction and tight tolerances gave me confidence that they would perform equally well in other challenging conditions. I was using the rings with my AR-10 and M-TAC scope in a scenario that required quick follow up shots.

Extended Use & Reliability

After several months of regular use, the Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings have proven to be exceptionally reliable. The finish has held up well with only minor wear marks in expected contact areas. I clean them regularly with a soft cloth and a light gun oil.

The rings continue to hold zero consistently, even after hundreds of rounds fired through the AR-10. I was very impressed. In my experience, they significantly outperform cheaper rings.

Compared to past experiences with less expensive rings that required frequent re-tightening and adjustments, the Burris rings have been a welcome relief. They provide a rock-solid mounting platform that inspires confidence in the rifle’s accuracy and reliability. These rings exceeded my expectations for a mid-range scope mounting system.

Breaking Down the Features of Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings

Specifications

The Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings boast several key specifications that contribute to their performance:

• 30mm Ring Diameter: Specifically designed to accommodate scopes with a 30mm main tube, a common size for tactical and precision optics. This is critical for ensuring a secure and proper fit.
• 3/4″ Height (0.75 inches): This measurement refers to the distance from the base of the rings to the center of the scope tube. This height is suitable for mounting scopes on AR-platform rifles with adequate clearance above the handguard or rail system, allowing proper cheek weld.
• Two-Piece Design: These rings are sold as a pair of two individual rings, allowing for flexible placement on the mounting rail. This can accommodate different scope lengths and mounting preferences.
• Matte Finish: The rings feature a non-reflective matte black finish, which minimizes glare and prevents unwanted attention in tactical situations. This is essential for maintaining stealth and avoiding detection.
• Six-Screw Design: Each ring utilizes six screws (three per side) to secure the scope tube. This provides exceptional clamping force and ensures a rock-solid hold, even under heavy recoil. The six-screw design distributes pressure evenly, minimizing stress on the scope tube and preventing damage.

These specifications are essential. The 30mm diameter ensures compatibility with a wide range of scopes.

Performance & Functionality

The Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings excel at their primary function: securely mounting a scope to a rifle. Their design provides an exceptionally stable platform that holds zero reliably.

The six-screw design is a standout feature. It provides more than enough clamping force to prevent slippage. The rings meet expectations.

There is no play or unwanted movement once the rings are properly installed and tightened. I’d recommend these rings for anyone.

Design & Ergonomics

The Burris rings feature a straightforward and functional design. Their weight adds to the overall sense of quality. They are easy to handle and install.

The matte black finish is durable and provides a non-reflective surface. Installation is simple and only requires basic tools. The rings provide a secure and stable mounting platform.

There is virtually no learning curve associated with using these rings.

Durability & Maintenance

Constructed from high-quality materials, the Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings are built to last. With proper care and maintenance, they should provide years of reliable service. Regular cleaning and lubrication are sufficient to keep them in optimal condition.

The finish is resistant to scratches and corrosion, further enhancing their longevity.

I have not had to perform any repairs to the rings.

Accessories and Customization Options

The Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings do not come with any additional accessories beyond the necessary mounting hardware. However, they are compatible with a wide range of Picatinny and Weaver-style rails. No significant customization is required.

These rings are compatible with a variety of scopes.

Pros and Cons of Burris Xtreme Tactical 30mm 3/4″ Height Scope Rings