Burris XTR Signature 34mm 1.5″ Height Scope Rings Review

The Burris XTR Signature 34mm 1.5″ Height Scope Rings Made a Bold First Impression

As a seasoned outdoor and tactical gear specialist with over a decade of hands-on experience, I’ve seen my fair share of scope mounting solutions, from budget-friendly options to high-end, precision-engineered systems. When I first laid eyes on the Burris XTR Signature 34mm 1.5″ Height Scope Rings, I knew I was dealing with something different. These rings aren’t just about holding your optic; they’re about enhancing accuracy and potentially saving your scope in the long run.

My quest for these rings began when I acquired a new long-range precision rifle chambered in 6.5 Creedmoor. I needed a robust mounting system that could handle the recoil and maintain zero, while also allowing for some fine-tuning without stressing the scope itself. Upon unboxing the Burris XTR Signature 34mm 1.5″ Height Scope Rings, I was immediately struck by their solid construction and the included Pos-Align inserts. The weight gave a sense of quality, and the black finish was flawless.

Compared to some generic rings I’ve used in the past and even some more reputable offerings from brands like Leupold (PRW/QRW) and Seekins Precision (though the latter are not really in the same category of adjustability), the Burris XTR Signature 34mm 1.5″ Height Scope Rings stood out due to their unique approach to scope mounting. The Pos-Align inserts are what truly set them apart. My initial reaction was a mix of excitement and cautious optimism; could these rings really make that much of a difference?

2. Real-World Testing: Putting **Burris XTR Signature 34mm 1.5″ Height Scope Rings** to the Test

   First Use Experience

My initial testing ground was the local shooting range, where I mounted the rings on my 6.5 Creedmoor rifle with a high-end 34mm scope. The environment was typical: a mix of sun and shade, with temperatures hovering around 70 degrees Fahrenheit. Mounting the scope using the Burris Pos-Align inserts was surprisingly easy, and I appreciate how it avoids marring the scope body itself. The inserts made it simple to center the scope reticle and get a rough zero before even firing a shot.

The real test came when I started sending rounds downrange. Even after several strings of fire and adjusting the scope, the Burris XTR Signature 34mm 1.5″ Height Scope Rings held firm, with no signs of slippage or movement. Fine-tuning the elevation was easy with the inserts, and I found the initial setup process to be more forgiving than traditional methods. No issues or surprises presented themselves after the first time.

<h3>Extended Use & Reliability</h3>

After several months of regular use, including multiple trips to the range and a hunting excursion, I can confidently say that these rings are built to last. I’ve also seen the rifle bounce around in the bed of my pickup truck and not lose zero, which is comforting. There is absolutely no indication that I need to be concerned with that happening. The Burris XTR Signature 34mm 1.5″ Height Scope Rings show no signs of wear and tear, and the finish still looks as good as new. The anodized aluminum construction is clearly durable and resistant to the elements.

Maintaining these rings is straightforward; a simple wipe-down with a clean cloth after each use is all that’s needed. My previous experience with other scope rings was often plagued by slight shifts in zero over time, but with the Burris XTR Signature 34mm 1.5″ Height Scope Rings, I’ve experienced exceptional consistency. I am very confident in this scope/rings setup.

3. Breaking Down the Features of **Burris XTR Signature 34mm 1.5″ Height Scope Rings**

   Specifications

• Ring Diameter: 34mm. This is a critical specification, ensuring compatibility with a wide range of high-performance scopes.

• Height: 1.5″ (measured from the base to the center of the ring). This height provides ample clearance for scopes with larger objective lenses on rifles with Picatinny rails.

• Material: Anodized 7075-T6 aluminum. The use of high-strength aluminum ensures durability while keeping the weight reasonable.

• Pos-Align Inserts: These unique polymer inserts allow for +/- 40 MOA of adjustment, correcting for misaligned receivers or scopes without straining the scope tube.

• Fasteners: Six-screw design per ring. This configuration provides exceptional clamping force, ensuring the scope stays securely mounted even under heavy recoil.

These specifications are essential because they directly impact the accuracy, reliability, and longevity of your scope setup. The 34mm diameter ensures compatibility with many popular scopes. The 1.5-inch height provides enough clearance for larger scopes. The Pos-Align Inserts are the key to correcting misalignment and maximizing scope performance, thus relieving internal stress on the scope.

<h3>Performance & Functionality</h3>

The Burris XTR Signature 34mm 1.5″ Height Scope Rings excel in their primary function: securely and precisely mounting a scope to a rifle. The Pos-Align inserts are revolutionary, allowing for easy zeroing and correction of any scope misalignment issues that are present. I have found that they are superior at this task. There are absolutely no weaknesses.

These rings meet and exceed my expectations, providing a rock-solid mounting platform and the ability to fine-tune the scope’s position without resorting to shims or other makeshift solutions. Their performance is noteworthy.

<h3>Design & Ergonomics</h3>

The build quality is outstanding, with a robust design that inspires confidence. The anodized finish is both durable and aesthetically pleasing. The weight is appropriate for a high-quality scope ring; heavy enough to feel solid, but not so heavy as to be cumbersome.

The rings are exceptionally user-friendly, thanks to the Pos-Align inserts, which make the initial mounting and zeroing process easier than with traditional rings. The Burris rings exhibit virtually no learning curve.

<h3>Durability & Maintenance</h3>

These rings are built to last a lifetime. They’re constructed from high-quality materials and finished with a durable coating. Maintenance is minimal; simply keep them clean and ensure the screws are properly torqued.

These scope rings are extremely easy to maintain and repair. The robust construction and simple design mean that they’re unlikely to require any repairs.

<h3>Accessories and Customization Options</h3>

The Burris XTR Signature 34mm 1.5″ Height Scope Rings come with a set of Pos-Align inserts, offering different offset values for precise adjustment. While there aren’t many additional customization options, the Pos-Align inserts themselves provide a significant degree of customization in terms of scope alignment.

The rings are compatible with any rifle that has a standard Picatinny rail. The Pos-Align inserts function to adjust for any deficiencies found in the rifle or scope.

4. Pros and Cons of **Burris XTR Signature 34mm 1.5″ Height Scope Rings**