Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate Review

First Thoughts on the Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate

Red dot sights have revolutionized handgun shooting, offering faster target acquisition and improved accuracy. But mounting them on classic pistols like the Beretta 92/96/90-Two and Taurus PT99 can be a challenge. Enter the Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate, a seemingly simple piece of hardware promising a secure and reliable optics platform.

My journey to this particular mounting plate stemmed from a desire to modernize my trusty Beretta 92FS. I wanted the speed and precision of a red dot, but I wasn’t keen on permanent modifications like milling the slide. After extensive research, the Burris plate seemed like the most viable, non-destructive option for attaching a Fastfire red dot.

Upon unboxing, I was immediately struck by the plate’s minimalist design. It’s a sleek, matte black piece of metal, surprisingly lightweight yet seemingly robust. The machining appeared clean and precise. My initial impression was cautiously optimistic; it looked like it could do the job, but the proof would be in the installation and, more importantly, the performance.

I considered other mounting options, including universal plates and those requiring gunsmithing. I ultimately chose the Burris plate for its model-specific design, promising a better fit and simpler installation compared to universal options. The gunsmithing route was a no-go for me, as I preferred a reversible solution. My hope was that this plate would provide a stable and repeatable zero without compromising the original pistol’s aesthetics or functionality.

Real-World Testing: Putting Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate to the Test

First Use Experience

My initial testing ground was my local shooting range, a controlled environment to assess the Burris plate’s functionality. I mounted the plate on my Beretta 92FS and attached a Burris Fastfire 3 red dot sight. Installation was straightforward, taking about 15 minutes using basic tools.

The first few magazines were dedicated to zeroing the red dot. I quickly noticed that the plate held the optic securely. Even with the 9mm’s recoil, there was no noticeable shift in zero after repeated shots. The increased speed of target acquisition was immediately apparent compared to iron sights. However, the added height of the optic took some getting used to.

Extended Use & Reliability

After several range sessions and approximately 500 rounds downrange, the Burris mounting plate has proven remarkably durable. There are no signs of loosening or wear. The matte finish has held up well, resisting scratches and maintaining its appearance.

Cleaning and maintenance are simple; I just wipe down the plate with a lightly oiled cloth after each range visit. So far, it has significantly outperformed my initial expectations. The mounting plate provided a stable and reliable platform for my Fastfire red dot sight. I’ve taken it to several outdoor shooting events, and it consistently holds zero.

Breaking Down the Features of Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate

Specifications

  • Finish: Matte. This provides a non-reflective surface, minimizing glare and ensuring a low profile on the firearm.
  • Compatibility: Designed specifically for Beretta 92, 96, 90-Two, Cougar, and Taurus PT99 pistols. This ensures a precise fit and optimal performance.
  • Material: (Not explicitly stated, but likely steel or aluminum). Durability is essential for withstanding recoil and maintaining zero.

Performance & Functionality

The Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate excels in providing a stable and secure platform for red dot sights. It allows for a co-witness with suppressor height sights, enhancing versatility. However, the added height of the optic can take some time to adjust to. The plate’s tight tolerances ensure repeatable zero, providing confidence in shot placement.

The plate’s strengths lie in its simplicity and effectiveness, but one potential improvement would be integrated rear sight notches for backup aiming. It met my expectations of providing a non-destructive and reliable red dot mounting solution, and it even exceeded those expectations with its consistent performance.

Design & Ergonomics

The build quality is solid, the plate feels substantial without adding excessive weight. It’s a noticeable improvement over some of the cheaper, more generic mounting options I’ve encountered. The matte finish is aesthetically pleasing and blends well with the firearm’s overall appearance.

The installation process is straightforward and user-friendly, requiring minimal tools. However, the added height of the optic could be a concern for some users with smaller hands. The plate’s design effectively maintains a balanced feel.

Durability & Maintenance

Based on my experience, the Burris mounting plate is built to last. Regular cleaning with a lightly oiled cloth is all that’s needed. With proper care, it should provide years of reliable service.

Accessories and Customization Options

The Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate is primarily designed to mount a Burris Fastfire red dot sight. While some users might attempt to adapt it for other optics with similar footprints, compatibility is not guaranteed. No other specific accessories come with this plate.

Pros and Cons of Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate

Pros

  • Non-destructive installation: No permanent modifications to the firearm are required.
  • Secure and stable optics platform: Holds zero consistently, even with repeated firing.
  • Model-specific design: Ensures a precise fit and optimal performance for compatible pistols.
  • Durable construction: Built to withstand recoil and environmental factors.
  • Easy installation: Can be installed quickly and easily with basic tools.

Cons

  • Added optic height: May require adjusting shooting technique.
  • Limited to Fastfire footprint: May not be compatible with other red dot sights without modification.


Who Should Buy Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate?

The Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate is perfect for Beretta 92/96/90-Two and Taurus PT99 owners who want to modernize their handguns with a red dot sight without permanent modifications. This is especially useful for those who prioritize fast target acquisition, improved accuracy, and versatility for range shooting or personal defense. The plate is also ideal for individuals who prefer a simple, user-friendly installation process.

Someone who wants to mount a different red dot sight with a different footprint, or isn’t comfortable with the added height of the optic, should skip this product. High suppressor height sights are recommended for optimal co-witness.

Conclusion on Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate

Overall, the Burris Beretta92/96/90-Two and Taurus PT99 Fastfire Red Dot Reflex Sight Mounting Plate is a well-designed and effective solution for adding a red dot sight to classic pistols. The price of $48.49 is justified by its quality, performance, and ease of installation. I would definitely recommend it to anyone looking to modernize their Beretta 92/96/90-Two or Taurus PT99.

If you’re looking to enhance your shooting experience with a red dot sight, and you own a compatible pistol, don’t hesitate. Get the Burris mounting plate and experience the difference!


Leave a Comment

Your email address will not be published. Required fields are marked *

Scroll to Top