BERETTA SCOPE MOUNT BASE FOR Review

First Thoughts on the BERETTA SCOPE MOUNT BASE FOR

The BERETTA SCOPE MOUNT BASE FOR their 1301 Competition shotgun is a simple yet critical accessory for anyone looking to add optics to their firearm. Beretta, a name synonymous with quality firearms and accessories, aims to provide a reliable and easy-to-install solution for mounting scopes and red dots to their popular shotgun. This mount promises to expand the versatility of the 1301 Competition, turning it from a close-quarters tool into a more capable all-around platform.

I had been looking for a reliable way to mount a red dot sight on my Beretta 1301 Competition for 3-Gun matches. The factory bead sight is great for fast target acquisition at close range, but I needed something more precise for longer shots. I considered several options, including aftermarket rails that required gunsmithing, but I ultimately chose the BERETTA SCOPE MOUNT BASE FOR its promise of easy installation and direct compatibility.

Unboxing the mount revealed a clean, black anodized aluminum piece. The mount felt solid and well-machined, with no sharp edges or visible imperfections. Its lightweight design was also immediately apparent, a key factor since I didn’t want to add unnecessary bulk to my shotgun.

Compared to universal shotgun scope mounts, the BERETTA SCOPE MOUNT BASE FOR offered a significant advantage in terms of fit and finish. Generic mounts often require shimming or modification to fit properly, while this Beretta-specific mount promised a seamless and secure attachment. I also considered a side-saddle shell holder with an integrated rail, but I wanted a dedicated optic mounting solution that wouldn’t interfere with reloading.

My first impression was one of cautious optimism. I was excited about the potential for improved accuracy and versatility with a red dot sight, but I was also concerned about whether the mount would hold zero under the recoil of heavy shotgun loads. Only real-world testing would tell.

Real-World Testing: Putting BERETTA SCOPE MOUNT BASE FOR to the Test

First Use Experience

I first tested the BERETTA SCOPE MOUNT BASE FOR at my local shooting range. I mounted a Trijicon RMR to the base and secured it to my Beretta 1301 Competition. Installation was straightforward, taking only a few minutes with the included hardware.

The mount held the red dot sight securely in place during my initial shooting session. I put about 100 rounds of various shotgun loads through the gun, from light target loads to heavy buckshot and slugs. Even with the heavier loads, the mount didn’t budge, and the red dot sight maintained its zero. Ease of use was excellent; the low-profile design didn’t interfere with the shotgun’s handling or cycling.

One minor issue I noticed was that the screws securing the mount to the receiver needed to be tightened after the first 50 rounds. It is essential to apply a thread locker for a more secure attachment.

Extended Use & Reliability

After several months of regular use, the BERETTA SCOPE MOUNT BASE FOR has proven to be a reliable and durable accessory. I’ve used it in multiple 3-Gun matches and training sessions, subjecting it to a variety of conditions, including rain, mud, and extreme temperatures.

The mount has held up remarkably well. There are no signs of wear and tear on the base itself, and the red dot sight remains securely attached. Cleaning and maintenance are simple; I just wipe it down with a cloth after each shooting session.

Compared to my previous experiences with other shotgun scope mounts, the BERETTA SCOPE MOUNT BASE FOR has exceeded my expectations. It provides a stable and secure platform for mounting optics, and it has significantly improved my accuracy and target acquisition speed. The peace of mind knowing my optic is securely mounted is invaluable.

Breaking Down the Features of BERETTA SCOPE MOUNT BASE FOR

Specifications

• Designed specifically for the Beretta 1301 Competition: This ensures a perfect fit and eliminates the need for modifications. The custom fit is crucial for maintaining proper alignment and a secure hold.
• Lightweight aluminum construction: The mount is made from durable yet lightweight aluminum, minimizing added weight to the shotgun. This helps maintain the shotgun’s balance and maneuverability.
• Black anodized finish: The black anodized finish provides corrosion resistance and a sleek, professional look. This finish also helps to prevent glare, which can be distracting in bright sunlight.
• Easy installation: The mount attaches directly to the pre-drilled and tapped holes on the Beretta 1301 Competition receiver. This eliminates the need for gunsmithing or special tools.
• Low-profile design: The mount sits close to the receiver, minimizing interference with the shotgun’s handling and sight picture. The low profile design promotes faster target acquisition.

These specifications are essential because they directly impact the mount’s performance, durability, and ease of use. The custom fit ensures a secure and stable platform for optics, while the lightweight construction prevents the shotgun from becoming too heavy or unwieldy.

Performance & Functionality

The BERETTA SCOPE MOUNT BASE FOR performs its job flawlessly. It provides a rock-solid platform for mounting optics on the Beretta 1301 Competition shotgun.

The primary strength is its secure and stable mounting platform. The only weakness is that the screws need to be initially tightened.

It meets and exceeds expectations by being reliable and durable.

Design & Ergonomics

The build quality is excellent. The mount is made from high-quality materials and features a clean, professional finish. The lightweight design and low profile make it comfortable to use and don’t interfere with the shotgun’s handling.

The mount is user-friendly, and there is no learning curve. The installation process is straightforward, and the mount is easy to maintain.

Durability & Maintenance

The BERETTA SCOPE MOUNT BASE FOR is built to last. The durable aluminum construction and corrosion-resistant finish ensure that it can withstand the rigors of regular use. Maintenance is simple; just wipe it down with a cloth after each shooting session.

Accessories and Customization Options

The BERETTA SCOPE MOUNT BASE FOR itself doesn’t come with any accessories, but it is compatible with a wide range of optics, including red dot sights, holographic sights, and scopes. The mount features a standard Picatinny rail, which allows for easy attachment of most popular optics.

The mount is also compatible with aftermarket accessories such as scope rings and risers, allowing users to customize their setup to their specific needs and preferences. Using thread locker on the screws is a must-have modification to ensure secure use.

Pros and Cons of BERETTA SCOPE MOUNT BASE FOR

Check Best Price HERE

Who Should Buy BERETTA SCOPE MOUNT BASE FOR?

The BERETTA SCOPE MOUNT BASE FOR is perfect for competitive shooters, 3-Gun enthusiasts, and anyone looking to add optics to their Beretta 1301 Competition shotgun. It provides a secure and reliable platform for mounting red dot sights, scopes, or other optics, enhancing accuracy and versatility.

This product might not be ideal for those who own other shotgun models or prefer traditional iron sights. People who are unwilling to perform minor maintenance on their firearms should also avoid this product.

A must-have accessory is a thread locker to secure the mounting screws.

Conclusion on BERETTA SCOPE MOUNT BASE FOR

The BERETTA SCOPE MOUNT BASE FOR is a well-designed and well-executed accessory that significantly enhances the capabilities of the Beretta 1301 Competition shotgun. Its direct compatibility, lightweight construction, and secure mounting platform make it a top choice for competitive shooters and enthusiasts alike.

At $56.49, the price is justified by the quality of the product and the added versatility it brings to the shotgun. The ease of installation and reliable performance make it a worthwhile investment for anyone looking to improve their accuracy and target acquisition speed.

I would highly recommend the BERETTA SCOPE MOUNT BASE FOR to anyone looking to mount optics on their Beretta 1301 Competition. Upgrade your shotgun today and experience the difference!

Check Best Price HERE