First Impressions of Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake
The Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake promises to be a significant upgrade for any AR-15 platform, aiming to tame recoil and improve muzzle control. As someone with over a decade of experience in the tactical and outdoor gear world, I’ve seen countless muzzle devices come and go. The claims of the RRD GEN2’s enhanced performance certainly piqued my interest, and I was eager to see if it lived up to the hype.
My primary need was reducing muzzle climb on my competition AR-15. The goal was faster follow-up shots and better accuracy during rapid fire drills. I had been using a standard A2 flash hider, which did little to mitigate recoil.
Upon receiving the Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake, I immediately noticed its robust construction. The 17-4PH Stainless Steel felt solid in my hand, and the Nitride finish gave it a sleek, durable look. Compared to some of the cheaper, aluminum muzzle brakes I’ve handled, this felt like a serious piece of equipment. Initially, I was excited to get it installed and see how it performed on the range, hoping it would provide the recoil reduction I needed.
Real-World Testing: Putting Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake to the Test
First Use Experience
I tested the Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake at my local outdoor shooting range. The conditions were typical for a spring afternoon – a bit breezy, with temperatures in the mid-60s. I ran several drills, focusing on rapid-fire sequences and target transitions.
The difference compared to my A2 flash hider was immediately noticeable. Muzzle rise was significantly reduced, allowing for much faster follow-up shots. However, the increased concussion was also apparent, especially for those shooting next to me.
Extended Use & Reliability
After several months of regular use, the Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake has held up remarkably well. There are no signs of significant wear and tear. The Nitride finish continues to resist corrosion and scratches, even after repeated exposure to carbon fouling and cleaning solvents.
Maintenance is simple – a quick scrub with a brush and some solvent after each range session keeps it in good condition. Compared to my previous experiences with other muzzle devices, this has proven to be a reliable and durable upgrade. It definitely outperforms the standard flash hider, but the aggressive recoil reduction comes at the cost of increased noise and concussion.
Breaking Down the Features of Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake
Specifications
- Manufacturer: Andro Corp Industries
- Caliber: Commonly used with .223/5.56 NATO, but check compatibility before purchase!
- Material: 17-4PH Stainless Steel is known for its high strength and corrosion resistance, making it ideal for muzzle devices.
- Finish: Nitride provides a hard, durable surface that resists wear and corrosion.
- Thread Pitch: Typically 1/2×28 for AR-15 platforms.
- Country of Origin: USA
These specifications are crucial because they directly impact the brake’s performance and longevity. The 17-4PH stainless steel construction ensures durability, while the Nitride finish protects against harsh environments. The correct thread pitch is vital for proper installation on your specific firearm.
Performance & Functionality
The Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake excels at reducing muzzle climb and recoil. The dual-port design effectively redirects gases to counteract upward movement. This allows for faster follow-up shots and improved accuracy, particularly during rapid-fire scenarios.
One weakness is the increased noise and concussion. The redirected gases create a significant pressure wave, making it less than ideal for indoor ranges or close-quarters situations. However, for competition shooting or tactical applications where recoil control is paramount, it performs admirably and meets expectations, considering the design.
Design & Ergonomics
The Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake is a relatively simple design. The black Nitride finish gives it a clean and professional look. Its robust construction inspires confidence.
Installation is straightforward using a crush washer or shims (not included). No special tools are required. The aggressive porting design is effective, though some may find it visually less appealing than more streamlined muzzle devices.
Durability & Maintenance
The 17-4PH Stainless Steel construction ensures that the Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake is built to last. The Nitride finish further enhances its durability and resistance to wear and corrosion. With proper care, this muzzle brake should provide years of reliable service.
Maintenance is simple – regular cleaning with a solvent and brush is all that’s needed. The durable finish makes it easy to remove carbon buildup and keep it in optimal condition.
Accessories and Customization Options
The Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake doesn’t come with any specific accessories. You’ll need to purchase a crush washer or shims separately for proper installation.
It is compatible with most AR-15 platforms with a standard 1/2×28 thread pitch. There aren’t any specific customization options beyond choosing different colors (if available from the retailer). It readily accepts most common suppressors designed for 5.56, but checking compatibility is always recommended.
Pros and Cons of Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake
Pros
- Significantly reduces muzzle climb for faster follow-up shots.
- Durable 17-4PH Stainless Steel construction ensures long-term reliability.
- Protective Nitride finish resists corrosion and wear.
- Easy to install on any AR-15 with a standard 1/2×28 thread pitch.
- Noticeably improves accuracy during rapid-fire drills.
Cons
- Increased noise and concussion can be unpleasant, especially for those nearby.
- No included crush washer or shims for installation.
- More aggressive porting design may not appeal to everyone aesthetically.
Who Should Buy Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake?
The Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake is perfect for competitive shooters and tactical users who prioritize recoil reduction and muzzle control above all else. It’s an excellent upgrade for anyone looking to improve their accuracy and speed during rapid-fire scenarios. This is also a great choice for those building or modifying their AR-15 for three-gun competitions.
However, if you primarily shoot indoors or in close proximity to others, the increased noise and concussion may be a deterrent. People who are highly sensitive to noise or shooting in confined spaces may want to consider a less aggressive muzzle device. A must-have accessory would be high-quality ear protection to mitigate the increased sound levels.
Conclusion on Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake
The Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake is a well-built and effective device that delivers on its promise of reduced recoil and improved muzzle control. Its durable construction and easy installation make it a worthwhile upgrade for any AR-15 enthusiast focused on performance.
At $76.49, the price is justified considering the quality of materials and the noticeable improvement in shooting performance. I would personally recommend the Andro Corp Industries RRD GEN2 Dual Port Muzzle Brake to anyone looking to enhance their AR-15’s handling characteristics, just be prepared for the increased noise level. If recoil reduction and muzzle control are your top priorities, then this is a solid choice.