Let’s Dive into AimShot MBSKIT2 MBS223 W/AR243/264/3006
The AimShot MBSKIT2 MBS223 W/AR243/264/3006 is a modular bore sight kit designed to quickly align your rifle’s optics with the barrel. This kit from AimShot promises to cover a wide range of calibers, making it a versatile tool for any gun owner. It boasts an extended battery life, a key selling point in the crowded bore sighting market.
As a seasoned outdoor and tactical gear specialist, I’ve seen countless bore sighting tools come and go. The promise of a single laser working with multiple calibers intrigued me, potentially streamlining my gear. The AimShot system looked like a good way to get rifles roughly zeroed before heading to the range for live-fire adjustment, saving time and ammunition.
Upon unboxing, the initial impression was mixed. The components felt relatively lightweight, with the brass arbors having a decent heft. The laser unit itself seemed compact, but the external battery pack felt a bit cheap and plasticky.
I’ve used other bore sights, including magnetic ones from Sightmark and caliber-specific lasers from Wheeler. I opted for the AimShot due to its purported versatility and the promise of an extended run time using AAA batteries, something the others lacked. I was hoping for a more efficient and cost-effective way to maintain zero across multiple rifles.
My initial excitement was tempered with a healthy dose of skepticism, given the price point. I was eager to see if the AimShot MBSKIT2 MBS223 W/AR243/264/3006 could deliver on its promises of versatility and extended battery life. Let’s see if this bore sight system can make the cut!
Real-World Testing: Putting AimShot MBSKIT2 MBS223 W/AR243/264/3006 to the Test
First Use Experience
I first tested the AimShot kit at my local shooting range before a long-range competition. I used it on several rifles, including an AR-15 in .223, a bolt-action .30-06, and a .308 Winchester. I needed to quickly get them close to zero before fine-tuning with live rounds.
The initial setup proved a bit fiddly. Getting the correct arbor aligned and seated properly required some patience and a few attempts. Once properly installed, the laser was visible, but dimmer than expected, especially in the bright daylight of the range.
While the AimShot MBSKIT2 MBS223 W/AR243/264/3006 did get me on paper at 50 yards, the accuracy was far from precise. The .30-06 arbor seemed to have a bit of play, resulting in a less consistent laser projection. I had to use far more ammo than anticipated to finalize zero.
Extended Use & Reliability
After several range trips and attempts to use the AimShot in different lighting conditions, my opinion has shifted. The initial convenience factor has waned due to the recurring issues with accuracy and setup. The extended battery life, while a plus, doesn’t compensate for the time spent troubleshooting the alignment.
The brass arbors have held up reasonably well, but the laser unit itself shows signs of wear. The battery compartment is a bit loose, and the external battery pack’s plastic feels increasingly brittle. Regular cleaning of the arbors is necessary to maintain consistent alignment.
Compared to my previous experiences with higher-end bore sights, the AimShot falls short in terms of reliability and precision. While it’s cheaper, the time and ammo saved by more accurate systems quickly offset the initial cost difference. I would personally rather spend more for more reliability.
Breaking Down the Features of AimShot MBSKIT2 MBS223 W/AR243/264/3006
Specifications
The AimShot MBSKIT2 MBS223 W/AR243/264/3006 includes the MBS223 laser bore sight module and three arbors: AR243, AR3006, and AR264. It covers .223-based calibers, .308-based calibers, .30-06-based calibers, and most magnum calibers. The laser has a 5mW output with a 650nm wavelength, emitting a red beam.
The system is powered by three small watch batteries for internal use and two AAA batteries for the external battery pack. The arbors are made of brass. The listed specifications are important because they determine the range of calibers you can bore sight and the visibility of the laser beam.
Performance & Functionality
The AimShot MBSKIT2 MBS223 W/AR243/264/3006 aims to provide a quick and easy method for bore sighting multiple calibers. In practice, the functionality is somewhat inconsistent. While it can get you close to zero, the accuracy varies depending on the caliber and the fit of the arbor.
The system’s main strength lies in its modular design. The external battery pack for extended life is also a plus. However, the weaknesses include inconsistent laser alignment and a noticeable lack of precision in larger calibers. The AimShot meets the basic expectation of getting rounds on paper, but doesn’t exceed it in terms of precision.
Design & Ergonomics
The AimShot system is designed to be compact and lightweight. The modularity is a clever idea, but the execution feels somewhat cheap. The brass arbors are well-machined, but the laser unit and external battery pack are made of lower-quality plastic.
The system is relatively user-friendly, but requires careful attention to detail during setup. There’s a slight learning curve in finding the correct arbor and ensuring it’s properly seated. The small watch batteries for the laser are inconvenient to replace compared to the AAA batteries for the external pack.
Durability & Maintenance
The long-term durability of the AimShot MBSKIT2 MBS223 W/AR243/264/3006 is questionable. The plastic components are likely to be the first to fail. The brass arbors should last a while with proper care.
Maintenance involves cleaning the arbors regularly to remove any debris or fouling. Keeping the battery contacts clean is also essential for reliable operation. Repairing the unit would likely be difficult, as replacement parts are not readily available.
Accessories and Customization Options
The kit includes the MBS223 laser bore sight and the AR243, AR3006, and AR264 arbors. AimShot offers additional arbors for other calibers, sold separately, allowing for expanded compatibility. No other customization options are available beyond the arbors.
The AimShot system is designed to be self-contained. It’s not compatible with third-party accessories or modifications. The arbor system is proprietary.
Pros and Cons of AimShot MBSKIT2 MBS223 W/AR243/264/3006
Pros
- Offers a modular system for multiple calibers, potentially saving money compared to buying individual bore sights.
- Includes an external battery pack for extended run time, using easily replaceable AAA batteries.
- Brass arbors are reasonably durable and well-machined.
- Provides a starting point for bore sighting, getting rounds on paper at short distances.
- Relatively inexpensive compared to other multi-caliber bore sighting systems.
Cons
- Inconsistent laser alignment leads to accuracy issues, especially with larger calibers.
- Cheap plastic components in the laser unit and external battery pack raise concerns about durability.
- Requires careful setup and attention to detail for proper alignment.
- Laser visibility is limited, especially in bright daylight conditions.
- Does not get you close to true zero, requiring use of ammunition at the range to get close to target.
Who Should Buy AimShot MBSKIT2 MBS223 W/AR243/264/3006?
The AimShot MBSKIT2 MBS223 W/AR243/264/3006 might be perfect for budget-conscious gun owners who have several rifles in different calibers and need a very rough initial bore sight. This kit may be suited for those that plan on shooting at closer ranges. The casual shooter that may use this once a year would benefit most.
Those seeking precision and reliability should skip this product. Competitive shooters, long-range enthusiasts, or anyone who values consistent zeroing should invest in a higher-quality system. Someone who expects pinpoint accuracy from the get-go will be disappointed.
A must-have accessory would be a high-quality set of gunsmithing tools to ensure proper seating of the arbors. Additional batteries for the laser module and external battery pack are also essential.
Conclusion on AimShot MBSKIT2 MBS223 W/AR243/264/3006
The AimShot MBSKIT2 MBS223 W/AR243/264/3006 offers a tempting proposition: a versatile, multi-caliber bore sighting system at an affordable price. However, in practice, the system falls short in terms of accuracy and overall quality. The cost of ammunition spent perfecting the bore sight almost outweighs the cost of the product itself.
The price point of $69.99 might seem justified for the included components. The inconsistency and questionable durability make it a questionable value. The time saved is minimal at best.
I would not personally recommend the AimShot MBSKIT2 MBS223 W/AR243/264/3006 to serious shooters. While it serves a basic function, the lack of precision and potential reliability issues make it a risky investment. Invest in a higher-quality, caliber-specific bore sight for better results and long-term satisfaction.