Agency Arms 417 Glock 17/19/34 Gen4 Compensator Review

Let’s Talk About Agency Arms 417 Glock 17/19/34 Gen4 Compensator

The Agency Arms 417 Glock 17/19/34 Gen4 Compensator is a device designed to mitigate recoil and muzzle rise on Glock pistols. Manufactured by Agency Arms, it aims to enhance control and accuracy, particularly during rapid firing.

I was looking for a way to improve my Glock 19’s performance in dynamic shooting scenarios. I wanted to reduce muzzle flip for faster follow-up shots.

My initial unboxing experience was positive. The compensator felt solid and well-machined, with a clean, black finish and the included set screws, Allen wrench, and Loctite added value.

I considered the Griffin Armament Micro Carry Comp and the Strike Industries Strike Comp, but I chose the Agency Arms 417 because of its reputation for quality and its specific design for Gen4 Glocks. I was excited to see if it lived up to the hype.

Check Best Price HERE

Real-World Testing: Putting Agency Arms 417 Glock 17/19/34 Gen4 Compensator to the Test

First Use Experience

I tested the Agency Arms 417 at my local indoor shooting range. It was mounted on my Glock 19 Gen4 with an aftermarket threaded barrel.

The compensator performed well in dry conditions, noticeably reducing muzzle rise and felt recoil. The reduction in muzzle flip made it easier to stay on target.

Installation was straightforward, though I needed to apply the included Loctite to the set screws to ensure a secure fit. I was pleasantly surprised by the immediate improvement in handling.

Extended Use & Reliability

After several range sessions and approximately 500 rounds, the Agency Arms 417 has held up well. There are no signs of loosening or damage.

The compensator shows no signs of wear. Cleaning is simple, requiring only a bore brush and solvent to remove carbon buildup.

Compared to using the Glock 19 without a compensator, the Agency Arms 417 offers a significant advantage in recoil management. My shot groupings tightened up considerably during rapid-fire drills.

Breaking Down the Features of Agency Arms 417 Glock 17/19/34 Gen4 Compensator

Specifications

• Caliber: 9mm Luger. This makes it suitable for the most common Glock calibers.
• Material: 7075 Aluminum. This provides a good balance between weight and durability.
• Gun Make: Glock. This compensator is specifically designed for Glock pistols.
• Gun Model: Glock 17, Glock 19, Glock 34. This broad compatibility makes it versatile.
• Model Generation: 4. It is designed for Gen4 Glock pistols.
• Weight: 1.7 oz. This adds minimal weight to the firearm.
• Included Accessories: Set Screws, Allen Wrench, Vial of Red Loctite. These are required for installation and secure fit.

These specifications contribute to the Agency Arms 417’s ability to effectively reduce muzzle rise without adding excessive weight or compromising reliability. The aluminum construction ensures durability without significantly altering the firearm’s balance.

Performance & Functionality

The Agency Arms 417 Glock 17/19/34 Gen4 Compensator significantly reduces muzzle rise, allowing for faster and more accurate follow-up shots. Recoil felt less snappy.

Its primary strength is the noticeable improvement in recoil management, but it may require some adjustment to the pistol’s recoil spring assembly for optimal performance. It met my expectations, enhancing the pistol’s handling and accuracy.

Design & Ergonomics

The Agency Arms 417 is well-machined and finished with a Mil Spec Type III Hard Anodized coating, which offers excellent resistance to wear and corrosion. The weight is minimal, barely noticeable when shooting.

Installation is relatively simple, requiring only basic tools and the provided Loctite. There is a slight learning curve associated with tuning the recoil system.

Durability & Maintenance

The 7075 Aluminum construction and Mil Spec Type III Hard Anodized finish suggest a long service life. The finish has proven to be scratch-resistant during testing.

Maintenance is straightforward, involving only occasional cleaning with a bore brush and solvent. The design allows for easy access to the bore for cleaning.

Accessories and Customization Options

The Agency Arms 417 comes with the necessary set screws, Allen wrench, and Loctite for installation. No additional accessories are included.

It is compatible with most aftermarket Glock threaded barrels with a 1/2×28 thread pitch. The front sight hole allows for the transfer of the pistol’s existing front sight.

Pros and Cons of Agency Arms 417 Glock 17/19/34 Gen4 Compensator

Check Best Price HERE

Who Should Buy Agency Arms 417 Glock 17/19/34 Gen4 Compensator?

This compensator is perfect for competitive shooters, tactical shooters, and anyone looking to improve their Glock’s handling and accuracy during rapid-fire engagements. Those who prioritize faster follow-up shots will benefit most.

This product may not be suitable for those who prefer a completely stock Glock or those who are unwilling to experiment with different recoil spring weights. People who don’t want to use Loctite on their pistol accessories should avoid this product.

A must-have accessory is a set of different weight recoil springs to fine-tune the pistol’s performance. A quality threaded barrel is also essential if the pistol is not already equipped with one.

Conclusion on Agency Arms 417 Glock 17/19/34 Gen4 Compensator

The Agency Arms 417 Glock 17/19/34 Gen4 Compensator is a well-designed and effective accessory for reducing muzzle rise and improving recoil management on Gen4 Glocks. The high-quality construction and included accessories make it a worthwhile investment.

At $94.50, the price is justified given the tangible improvement in performance and the quality of the materials used. It’s a worthwhile investment for serious shooters.

I would definitely recommend the Agency Arms 417 to anyone looking to enhance the performance of their Gen4 Glock. Get yours today and experience the difference a quality compensator can make!