First Thoughts on the Advanced Technology Injection Molded Clamp w/Sling Swivel St
The Advanced Technology Injection Molded Clamp w/Sling Swivel St is a simple, yet potentially game-changing accessory for shotgun owners. Offered by Advanced Technology, this clamp aims to provide a secure mounting point for a sling swivel, and, as some users have discovered, even accessories like flashlights. For the price, it promises to be a versatile and inexpensive upgrade.
I stumbled upon this product while searching for a solution to add a sling to my old Mossberg 500. The factory setup didn’t offer any easy way to attach a sling without significant modifications. The Advanced Technology Injection Molded Clamp w/Sling Swivel St seemed like a straightforward, non-permanent fix that wouldn’t break the bank.
My initial reaction upon unboxing was positive, given the price point. The clamp felt surprisingly sturdy, made from what appeared to be a robust injection-molded polymer. The sling swivel stud looked firmly attached.
Compared to dedicated sling mounting kits that can cost upwards of $50, or even gunsmithing services, this was a very attractive option. It also seemed simpler than alternatives that require drilling and tapping the receiver. My initial excitement stemmed from the promise of a quick, easy, and affordable solution to a common shotgun problem.
Real-World Testing: Putting Advanced Technology Injection Molded Clamp w/Sling Swivel St to the Test
First Use Experience
I first tested the Advanced Technology Injection Molded Clamp w/Sling Swivel St on my Mossberg 500 while practicing some basic tactical drills at an outdoor range. Conditions were dry and sunny, providing an ideal environment to assess its performance. Installation was a breeze, taking only a few minutes to securely clamp it onto the magazine tube.
The sling swivel worked perfectly, allowing for comfortable and secure carry of the shotgun. I ran through a few rapid-fire drills, simulating different shooting positions, and the clamp held firmly in place. There were no noticeable shifts or loosening, which immediately boosted my confidence in its reliability.
Extended Use & Reliability
After several range trips and even a dove hunting excursion spanning a couple of months, the Advanced Technology Injection Molded Clamp w/Sling Swivel St has proven to be surprisingly resilient. I’ve subjected it to varying weather conditions, from dry heat to light rain, and it has consistently held up. There are no visible cracks or significant wear marks on the polymer, demonstrating its durability.
Maintenance is practically non-existent. A quick wipe down with a damp cloth after each use is all it takes to keep it clean. Compared to some of my other gear that requires meticulous cleaning and oiling, this clamp is remarkably low-maintenance. It has outperformed my initial expectations, especially considering its price point.
Breaking Down the Features of Advanced Technology Injection Molded Clamp w/Sling Swivel St
Specifications
- Caliber: Listed as “Clamp”, this indicates its universal design for shotguns. It’s designed to fit various shotgun magazine tube diameters.
- Capacity: Listed as “Shotgun,” this refers to its compatibility with various shotgun models. It is not related to ammunition capacity.
- Finish: Black. The black finish offers a non-reflective, tactical appearance and likely adds some resistance to minor scratches.
- Model: Shotgun. Again, this emphasizes that it’s explicitly designed for shotguns.
These specifications, though basic, highlight the clamp’s focus on simple functionality and broad compatibility. The injection-molded construction keeps costs down, while the universal design increases its utility. This clamp is not about high-end materials or complex engineering.
Performance & Functionality
The Advanced Technology Injection Molded Clamp w/Sling Swivel St performs its primary function admirably: providing a stable sling attachment point. It securely clamps onto the shotgun’s magazine tube, allowing for comfortable sling carry. The swivel stud rotates smoothly, preventing sling twisting and tangling.
The main strength of this clamp is its simplicity and effectiveness. It’s easy to install, requires no special tools, and holds securely under moderate recoil. However, a potential weakness is the polymer construction, which might not withstand extreme abuse or very heavy loads. Ultimately, it meets expectations for a low-cost, no-frills sling mounting solution.
Design & Ergonomics
The injection-molded polymer construction keeps the weight to a minimum, adding virtually no noticeable heft to the shotgun. The clamp’s low-profile design prevents it from snagging on clothing or gear. It’s a simple, functional design without unnecessary frills.
The lack of sharp edges or protruding parts contributes to a comfortable user experience. Installation is intuitive, requiring only a screwdriver or Allen wrench (depending on the model). The user-friendliness of the Advanced Technology Injection Molded Clamp w/Sling Swivel St is a major plus.
Durability & Maintenance
The durability of this clamp is adequate for most recreational and sporting applications. While the polymer construction isn’t as robust as steel, it’s surprisingly resilient. I anticipate that it will last for several years with proper use and care.
Maintenance is minimal, requiring only occasional cleaning. The clamp is resistant to rust and corrosion, further simplifying its upkeep. Its simple design also means there are no small parts to lose or complicated mechanisms to maintain.
Accessories and Customization Options
The Advanced Technology Injection Molded Clamp w/Sling Swivel St comes with the clamp itself and the sling swivel stud. It doesn’t directly support other accessories. However, some users have creatively adapted it to mount flashlights or other small items, as evidenced by user feedback.
Due to its simple design, the customization options are limited. Users could potentially modify it to add Picatinny rails, but this would require some DIY skills and could compromise the clamp’s structural integrity. The best customization involves using different slings that fit the swivel stud.
Pros and Cons of Advanced Technology Injection Molded Clamp w/Sling Swivel St
Pros
- Extremely Affordable: The low price makes it accessible to almost any shotgun owner.
- Easy Installation: Requires no special tools or gunsmithing skills.
- Lightweight Design: Adds minimal weight to the shotgun.
- Functional Sling Mounting: Provides a secure and reliable sling attachment point.
- Versatile: Can be adapted for other accessories like flashlights.
Cons
- Polymer Construction: Not as durable as metal alternatives.
- Limited Customization: Lacks options for adding other accessories directly.
Who Should Buy Advanced Technology Injection Molded Clamp w/Sling Swivel St?
The Advanced Technology Injection Molded Clamp w/Sling Swivel St is perfect for:
- Shotgun owners looking for an affordable and easy way to add a sling.
- Hunters who need a hands-free way to carry their shotgun in the field.
- Tactical shooters who want a simple sling solution for training or competition.
- Home defense enthusiasts seeking a basic, functional sling setup.
This product is not ideal for:
- Those who require a heavy-duty, bombproof sling mounting system.
- Users who need to mount multiple accessories (lights, lasers, etc.) on their shotgun.
A must-have accessory is a good quality sling to attach to the swivel stud.
Conclusion on Advanced Technology Injection Molded Clamp w/Sling Swivel St
The Advanced Technology Injection Molded Clamp w/Sling Swivel St is a remarkably effective and affordable accessory for shotgun owners seeking a simple sling solution. It’s not the most robust or feature-rich option on the market, but it excels in its simplicity, ease of use, and low price point.
The price is absolutely justified, especially considering the functionality it provides. For just over $10, you get a secure sling mounting point that requires no gunsmithing or complicated installation. It’s a phenomenal value.
I would personally recommend this product to anyone looking for a budget-friendly way to add a sling to their shotgun. It’s a no-brainer upgrade that can significantly improve the handling and usability of your firearm. Don’t overthink it: if you need a sling on your shotgun and don’t want to spend a fortune, give the Advanced Technology Injection Molded Clamp w/Sling Swivel St a try. You might be surprised at how well it performs.