CVA Durasight Dead-On Low One Piece Base/Rings Mount Set Review

First Thoughts on the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set promises a streamlined, low-profile optic mounting solution for CVA muzzleloaders manufactured from 2010 onward. I’ve spent countless hours in the field, wrestling with scope mounts that either failed to hold zero or added unnecessary bulk to my rifles. This set, offered by CVA, aims to eliminate those frustrations, and at a compelling price point of $25.99, it piqued my interest immediately.

My primary goal was to find a rock-solid, yet affordable scope mount for my CVA Accura MR. The factory mount had a tendency to loosen after a few shots, leading to frustrating accuracy issues during hunting season. A reliable one-piece base and rings system seemed like the optimal solution, offering improved stability and easier scope alignment.

Upon unboxing, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set felt surprisingly solid, given its low price. The black finish appeared durable, and the overall design was simple and functional. My initial impression was positive, but I knew the real test would come with field use.

I considered a few other options, including more expensive, name-brand scope mounts. However, I chose the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set due to its specific compatibility with my CVA rifle and its attractive price point. The “low” profile was also a key factor, as I prefer a cheek weld that’s as close to the bore axis as possible. I was cautiously optimistic, hoping this mount would live up to its promises of rock-solid performance and easy installation.

Real-World Testing: Putting CVA Durasight Dead-On Low One Piece Base/Rings Mount Set to the Test

First Use Experience

My first test of the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set took place at my local shooting range. The installation was straightforward, taking only a few minutes with a basic set of tools. I mounted a Leupold VX-Freedom 3-9×40 scope and proceeded to sight in my CVA Accura MR.

The weather was typical for early spring: cool and slightly damp. After about ten shots, I checked the screws on the mount and was pleased to find they were still tight. The scope held zero consistently throughout the session. I was impressed by the stability of the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set.

There were no immediate issues or surprises. The mount performed as expected, providing a solid platform for my scope. The low profile was noticeable and improved my cheek weld considerably.

Extended Use & Reliability

Over the following months, I continued to use the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set during various range sessions and even a few scouting trips. The mount has held up exceptionally well, showing no signs of loosening or shifting, even after hundreds of rounds. The black finish has proven to be surprisingly durable, resisting scratches and wear.

Maintenance is simple, requiring only occasional cleaning and tightening of the screws. Compared to my previous scope mount, which required frequent adjustments, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set has been a significant improvement. It outperforms my expectations, especially considering its budget-friendly price.

Breaking Down the Features of CVA Durasight Dead-On Low One Piece Base/Rings Mount Set

Specifications

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set is designed specifically for ALL CVA 2010+ GUNS LOW BLACK. This means it’s intended for CVA muzzleloaders manufactured from 2010 onward with a low-profile design. The mount features a one-piece base with integrated rings.

The rings are designed to accommodate scopes with a one-inch tube diameter. The “low” profile of the mount is intended to position the scope as close to the bore axis as possible, improving cheek weld and accuracy. The entire set is constructed from durable materials and finished in a matte black coating. These specifications matter because they directly impact the mount’s compatibility, stability, and overall performance.

Performance & Functionality

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set performs its primary function flawlessly: securely mounting a scope to a CVA muzzleloader. Its one-piece design enhances stability and reduces the likelihood of the scope losing zero. The low profile improves the shooter’s cheek weld, leading to more consistent and accurate shots.

The main strength is its reliability and ease of use. The instructions are clear, and the mount is simple to install. A potential weakness might be its limited compatibility; it’s specifically designed for CVA rifles manufactured from 2010 onward. For these rifles, this mount absolutely exceeds expectations.

Design & Ergonomics

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set features a simple, functional design. The materials used appear to be durable, and the black finish is aesthetically pleasing. The low profile is a key ergonomic feature, promoting a more natural and comfortable shooting position.

The mount is user-friendly, requiring minimal effort to install and adjust. There is no significant learning curve.

Durability & Maintenance

Based on my experience, the CVA Durasight Dead-On Low One Piece Base/Rings Mount Set is built to last. The materials seem robust, and the finish is resistant to wear and tear. With proper care, this mount should provide years of reliable service.

Maintenance is straightforward, requiring only occasional cleaning and tightening of the screws. No specialized tools or skills are required.

Accessories and Customization Options

The CVA Durasight Dead-On Low One Piece Base/Rings Mount Set does not come with any additional accessories beyond the mounting screws. Customization options are limited, as the mount is designed specifically for a one-inch scope tube.

However, the mount is compatible with a wide range of one-inch scopes from various brands.

Pros and Cons of CVA Durasight Dead-On Low One Piece Base/Rings Mount Set