First Thoughts on the Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black
The Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black offers a solution for mounting a red dot sight on one of the most popular concealed carry pistols. Trijicon is a name synonymous with quality and durability in the optics world, and their mounting plates usually reflect this commitment. This particular plate bridges the gap for those wanting to add the compact RMRcc to their M&P Shield.
My journey to this plate began when I decided to upgrade my S&W M&P Shield for better target acquisition. Iron sights are reliable, but aging eyes benefit greatly from a red dot, especially for quick defensive shooting. I was looking for a mounting solution that wouldn’t compromise the slim profile of my Shield and offered a rock-solid platform for the optic.
Upon unboxing, the first thing I noticed was the clean, matte black finish that seamlessly matched my Shield. The weight felt substantial enough to inspire confidence without adding unnecessary bulk to the slide. The machining appeared precise, with sharp edges and a tight fit.
I considered a few other options, including milling the slide directly or using a dovetail adapter from another manufacturer. Milling was a permanent modification I wasn’t ready to commit to, and other dovetail adapters seemed less robust. The Trijicon plate offered a balance of easy installation and secure mounting that was appealing.
My initial impression was one of cautious optimism; Trijicon’s reputation is strong, and this plate looked well-made. However, I knew the real test would be in the installation and performance on the range. I was hopeful that this plate would deliver the reliability and precision I expected from Trijicon.
Real-World Testing: Putting Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black to the Test
First Use Experience
My first outing with the Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black was at my local shooting range. I wanted a controlled environment to assess the mounting plate’s stability and zero the red dot. The weather was mild, with a slight breeze – ideal conditions for testing.
Installation was relatively straightforward, replacing the rear sight after drifting it out with a sight pusher. The Trijicon plate fit snugly into the dovetail, requiring a few gentle taps with a nylon hammer to seat it fully. After tightening the set screws and mounting the RMRcc, everything felt solid.
The first few magazines downrange confirmed my initial assessment. The plate held zero remarkably well, even after rapid firing drills. I experienced no noticeable shifting or loosening of the mounting screws. My target acquisition was significantly faster with the red dot compared to the factory iron sights, which made the Shield even more effective.
Extended Use & Reliability
After several months of consistent use, including weekly trips to the range and carrying the Shield as my EDC, the Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black has proven its worth. The matte black finish shows minimal signs of wear, despite regular handling and holster use. The plate has remained securely mounted.
I haven’t noticed any loosening of the screws or shifting of the zero. This speaks volumes about the quality of the materials and the precision of the machining. Cleaning is a breeze; a quick wipe down with a lightly oiled cloth keeps the plate looking like new.
This Trijicon plate has significantly outperformed my expectations compared to previous dovetail mounting solutions I’ve used on other firearms. It provides a far more stable and reliable platform than other universal mounting options on the market. The difference is noticeable in both accuracy and peace of mind.
Breaking Down the Features of Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black
Specifications
The Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black is specifically designed for the S&W M&P Shield and the Trijicon RMRcc red dot sight. It features a one-piece design for enhanced stability. The plate is finished in a matte black coating for corrosion resistance and a seamless look.
It is crafted from high-quality steel, providing a robust and durable mounting solution. The plate replaces the rear sight, utilizing the existing dovetail for installation. This eliminates the need for permanent modifications to the slide. Precise machining ensures a secure and accurate fit for the RMRcc.
The significance of these specifications lies in their contribution to the plate’s overall performance and reliability. The steel construction guarantees durability under recoil. The precise fit ensures consistent zero retention. This is absolutely critical for a defensive pistol setup.
Performance & Functionality
The Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black performs its job flawlessly. It provides a stable and reliable mounting platform for the RMRcc. The plate’s low profile helps maintain a reasonable sight height.
The only potential weakness is that it does add slightly to the overall height of the optic. However, the improvement in target acquisition speed and accuracy far outweighs this minor drawback. It meets, and in some ways exceeds, my expectations for a dovetail mounting plate.
Design & Ergonomics
The build quality is excellent, as expected from Trijicon. The steel construction feels robust and confidence-inspiring. The plate adds minimal weight to the slide and does not negatively impact the balance of the pistol.
The design is user-friendly, with a straightforward installation process. Some may require a sight pusher tool to remove the rear sight on the Shield, but beyond that, no specialized skills or tools are needed. The plate seamlessly integrates with the aesthetics of the M&P Shield.
Durability & Maintenance
Given its steel construction and durable finish, the Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black is built to last. With proper care, it should provide years of reliable service. Maintenance is simple, requiring only occasional cleaning and inspection of the mounting screws.
Accessories and Customization Options
The plate itself does not come with any accessories beyond the necessary mounting screws. However, it opens up a world of customization by allowing the use of a Trijicon RMRcc red dot sight. This is the key accessory it enables. The RMRcc is compatible with various aftermarket iron sights. They can be used as backup sights. The plate is designed specifically for the RMRcc and may not be compatible with other red dot sights.
Pros and Cons of Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black
Pros
- Rock-solid mounting platform for the Trijicon RMRcc.
- Durable steel construction ensures long-lasting reliability.
- Easy installation without permanent modification to the slide.
- Maintains a low-profile design for comfortable concealed carry.
- Enhances target acquisition speed and accuracy.
Cons
- Slightly increases the overall height of the optic.
- Designed specifically for the Trijicon RMRcc; limited compatibility with other optics.
Who Should Buy Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black?
This mounting plate is perfect for M&P Shield owners looking to improve their pistol’s accuracy and target acquisition speed. It is beneficial for concealed carriers, competitive shooters, and anyone seeking a reliable red dot sight solution. It’s especially useful for those with aging eyes or those who struggle with traditional iron sights.
Those who are unwilling to use the Trijicon RMRcc should skip this product. Individuals prioritizing the lowest possible optic height may also want to explore other options. A quality sight pusher is a must-have accessory for easy and safe installation.
Conclusion on Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black
The Trijicon RMRcc Mounting Plate S&W M&P Shield 1-Piece Matte Black is an excellent investment for anyone wanting to upgrade their M&P Shield with a red dot sight. The Trijicon name guarantees quality and reliability. The plate provides a secure and stable mounting platform without requiring permanent modifications.
At $68.99, the price is justified given the performance and durability of the plate. It’s a worthwhile investment in your shooting confidence. I would wholeheartedly recommend it to any M&P Shield owner looking for a red dot solution. Upgrade your Shield today and experience the difference a Trijicon RMRcc can make!