First Thoughts on the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ
Red dot sights have revolutionized pistol shooting, offering faster target acquisition and improved accuracy. However, mounting them on certain pistols can be a challenge. That’s where the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ comes in, promising a secure and reliable platform for popular red dot optics on a range of Walther pistols.
As an experienced outdoor and tactical gear specialist, I’ve seen countless mounting solutions come and go. I was looking for a reliable and low-profile option to mount a Holosun 507c on my Walther PPQ M2, avoiding the expense and wait time of slide milling. The EGW mount seemed like a perfect fit, promising easy installation and compatibility with my chosen optic.
Upon unboxing, I was immediately impressed by the mount’s solid construction and clean finish. The black anodized aluminum felt robust and the included hardware looked comprehensive. My initial thoughts were that this was a well-made product that would hopefully live up to its promise of a simple and secure mounting solution.
Compared to some universal optic mounts that attempt to fit a wide variety of firearms, the EGW mount is specifically designed for Walther PPQ and similar models. This focused design was a major selling point for me, offering a potentially more stable and precise fit than a generic option. I chose it over a dovetail mount from another manufacturer because of EGW’s reputation for quality and the perceived lower profile of this particular design. I was cautiously optimistic, hoping for a quick and painless upgrade to my PPQ’s capabilities.
Real-World Testing: Putting EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ to the Test
First Use Experience
My first experience with the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ was at my local indoor shooting range. I installed the mount on my Walther PPQ M2 9mm following the included instructions, which were relatively straightforward. Installation took about 15 minutes, including carefully tightening the screws and applying a small amount of thread locker.
The initial range session involved zeroing the Holosun 507c mounted on the EGW adapter. The mount held the optic securely in place throughout the process, with no noticeable shifting or loosening. I ran about 200 rounds of various 9mm ammunition through the PPQ, and the mount performed admirably, even with the increased recoil of some hotter loads.
I appreciated how little the mount seemed to interfere with my grip or sight picture beyond the addition of the red dot itself. There were no immediate issues, but I was keen to see how it held up over more extended use and different conditions.
Extended Use & Reliability
After several months of regular use, the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ has proven to be a surprisingly robust and reliable addition to my PPQ. I’ve used it in a variety of conditions, including humid summer days at an outdoor range and cooler, drier days at indoor facilities. I have fired over 1000 rounds with the mount installed.
The mount shows minimal signs of wear and tear, with only slight finish imperfections visible after cleaning. The screws have remained tight, and the optic has maintained its zero, a testament to the secure fit provided by the EGW design. Cleaning is simple; a quick wipe down with a gun cleaning cloth after each range session is sufficient.
Previously, I had used a different brand of universal dovetail mount on another pistol, and the EGW mount outperformed it in every aspect. The EGW mount is far more stable, less prone to loosening, and offers a significantly lower profile, making it much more comfortable to carry and use. The reliability and durability of this mount has far surpassed my expectations.
Breaking Down the Features of EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ
Specifications
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ is specifically designed to interface with the dovetail found on various Walther pistol models. It allows mounting of Trijicon RMR/SRO and Holosun 407c/507c pattern red dot sights.
The mount is constructed from lightweight, yet durable, aluminum. It is finished with a matte black anodized coating to resist corrosion and wear. The kit includes all necessary mounting hardware.
This mount is compatible with: Walther PPQ Classic (M1), Walther PPQ M2 (All models except optics ready and .22lr), Walther PPQ 45, Walther PPQ 45 SD, Walther PPQ Sub Compact, Walther P99 (Covers Decocker Rendering it Useless), Walther PPX (All Models), Walther Creed, Walther Creed 10 Round, Walther PPS (Does not fit models with sight rib), and Walther PPS M2 (Does not fit models with sight rib). It is NOT compatible with: Walther PPQ 22, Walther PPQ Q4 Tac (optics ready), Walther Q5 Match (optics ready), Walther Q5 Match SF Arabesque, Walther Q5 Match SF Patriot, Walther Q5 Match SF Black Diamond, and Walther Q5 Match SF Match Black Tie. The inclusion of a set screw allows for use with both friction fit and plunger-detent dovetails.
Performance & Functionality
The primary function of the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ is to provide a stable and secure platform for mounting red dot optics on compatible Walther pistols. The mount performs this function admirably, offering a rock-solid attachment point that minimizes movement and ensures consistent zero retention.
Its strength lies in its simplicity and robust construction. The low profile design is also a major benefit, as it minimizes the added height of the optic, allowing for a more natural sight picture. One potential weakness is the inability to co-witness with standard iron sights, but this is a common trade-off with most dovetail-mounted optic solutions. Overall, it exceeds my expectations for a dovetail-mounted optic adapter.
Design & Ergonomics
The design of the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ is simple, functional, and aesthetically pleasing. The mount is machined from aluminum with a black anodized finish which blends seamlessly with the finish of most Walther pistols. The weight is negligible, adding minimal bulk to the firearm.
The installation process is relatively straightforward, requiring only basic tools and a small amount of gunsmithing knowledge. The low profile design does not interfere with the shooter’s grip or comfort. The build quality is excellent, and the mount feels solid and well-made in hand.
Durability & Maintenance
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ is constructed from durable materials designed to withstand the rigors of regular use. The aluminum construction and anodized finish provide excellent resistance to corrosion and wear.
Maintenance is minimal, requiring only occasional cleaning to remove dirt and debris. The mount should last for many years with proper care.
Accessories and Customization Options
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ itself does not offer extensive customization options. Its primary purpose is to provide a platform for mounting red dot optics.
The main customization involves selecting a compatible red dot sight, such as a Trijicon RMR/SRO or Holosun 407c/507c. The mount is specifically designed to interface seamlessly with these optics. While other optics might be adapted to fit, it’s best to stick to the intended models for optimal fit and performance.
Pros and Cons of EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ
Pros
- Provides a stable and secure mounting platform for popular red dot optics.
- Easy installation with included hardware.
- Low profile design minimizes added bulk.
- Durable aluminum construction with corrosion-resistant finish.
- Offers a cost-effective alternative to slide milling.
Cons
- Does not allow co-witnessing with standard iron sights.
- Covers the decocker on Walther P99 models, rendering it useless.
Who Should Buy EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ?
This mount is perfect for Walther PPQ, PPX, Creed, PPS, and P99 owners who want to add a red dot sight without the expense or permanency of slide milling. It’s an excellent option for competitive shooters, recreational shooters, and those who use their Walther for home defense or concealed carry.
This product might not be ideal for those who want to retain the ability to co-witness with their iron sights. Also, owners of optics-ready Walther models (Q4 Tac, Q5 Match) should consider using the factory-provided mounting solutions instead.
A must-have accessory would be a quality set of gunsmithing screwdrivers to ensure proper tightening of the mounting screws. Also, thread locker is highly recommended to prevent screws from loosening over time.
Conclusion on EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for Walther PPQ is a well-designed and executed product that delivers on its promise of providing a reliable red dot mounting solution for various Walther pistols. The price is justified by the quality of construction and the ease of installation.
I would personally recommend this mount to anyone looking for a cost-effective and non-permanent way to add a red dot sight to their compatible Walther pistol. Its reliability, durability, and low-profile design make it an excellent upgrade. If you’re looking to improve your accuracy and target acquisition speed, this mount is a great place to start. Get yours today and experience the benefits of a red dot sight on your Walther!