Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount Review

First Thoughts on the Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount

The Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount promises to be a game-changer for Sub 2000 owners looking to enhance their carbine’s accuracy and usability. Midwest Industries is a reputable manufacturer known for its quality firearm accessories, and this mount aims to provide a stable and reliable platform for Aimpoint T1/T2/H1 pattern red dot sights on the popular Kel-Tec Sub 2000 Gen 2. Its pivot design, intended for compact storage, immediately caught my attention.

As an experienced shooter and gear specialist, I’ve always appreciated well-designed mounting solutions that offer both functionality and convenience. I was looking for a way to improve the sight picture on my Sub 2000 without sacrificing its unique folding capability. The promise of maintaining the carbine’s compact profile while adding a quality optic was incredibly appealing.

Upon unboxing, the mount felt solid and well-made. The black finish appeared durable, and the pivot mechanism seemed robust. Compared to some cheaper, polymer-based mounts I’ve seen, the Midwest Industries mount exuded quality. My initial impression was positive; it seemed like a well-engineered solution that could truly enhance the Sub 2000. I was excited to install it and see how it performed at the range, hoping it would address the common complaint of the Sub 2000’s less-than-ideal factory sights.

Real-World Testing: Putting Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount to the Test

First Use Experience

I tested the Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount at my local outdoor range. The weather was clear and sunny, perfect for sighting in a new optic. Installation was straightforward, fitting snugly onto my Gen 2 Sub 2000.

The initial shooting session revealed some challenges. While the mount itself felt secure, achieving a consistent zero proved to be more difficult than expected. It took more adjustments than usual to get the red dot dialed in. After about 50 rounds, the mount seemed to settle, but the experience left me with some concerns about its ability to hold zero over the long term.

Extended Use & Reliability

After several range trips spanning a few months, the Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount showed some signs of wear. The black finish started to exhibit minor scratches and scuffs, primarily around the pivot point. The pivot mechanism, while still functional, felt slightly looser than when new.

Maintaining the mount was relatively simple; a quick wipe-down with a lightly oiled cloth kept it clean and free of debris. However, I continued to monitor its zero, finding that slight adjustments were occasionally necessary, especially after extended shooting sessions. While not a complete failure, this ongoing need for adjustment was a notable drawback compared to other mounts I’ve used. The pivot feature remained functional but exhibited an increasing wobble with continued folding and unfolding of the Sub 2000.

Breaking Down the Features of Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount

Specifications

• Compatibility: Designed specifically for Aimpoint T1/T2/H1 and similar pattern red dot sights. This limits the optic choices, but ensures a streamlined fit for compatible models.
• Mounting Platform: Fits Gen 2 Kel-Tec Sub 2000 carbines. It’s crucial to verify compatibility with your specific generation of Sub 2000.
• Pivot Design: Allows the Sub 2000 to be folded for compact storage with the optic still attached. This is a key feature for maintaining the Sub 2000’s portability.
• Material: Likely constructed from aluminum for durability and weight reduction. The exact aluminum alloy used is not specified.
• Finish: Black finish, likely anodized, for corrosion resistance. While functional, the finish appears to be prone to scratching.

Performance & Functionality

The Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount’s primary function is to provide a stable platform for mounting a red dot sight. While it does accomplish this, the long-term zero retention is questionable. The pivot feature is functional, but the added wobble over time degrades the shooting experience.

The mount’s strengths lie in its compatibility with the Sub 2000’s folding design and its relatively low profile. Its weaknesses include the difficulty in maintaining a consistent zero and the potential for wear on the pivot mechanism. Despite its initial promise, the mount does not completely meet expectations, particularly concerning long-term reliability.

Design & Ergonomics

The build quality is generally good, with a solid feel and precise machining. The black finish, while aesthetically pleasing, shows wear relatively easily. The mount adds minimal weight to the Sub 2000, maintaining its lightweight profile.

The installation process is straightforward, and the mount integrates well with the Sub 2000’s design. However, the pivot mechanism could benefit from tighter tolerances to minimize wobble. Overall, the design is functional, but there is room for improvement in terms of durability and long-term stability.

Durability & Maintenance

The Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount appears to be reasonably durable, but the finish is prone to scratching, and the pivot mechanism may loosen over time. Regular cleaning with a lightly oiled cloth is recommended to prevent corrosion. More robust materials and a sturdier pivot design could significantly improve its lifespan.

Accessories and Customization Options

The mount itself doesn’t offer any additional accessory mounting points. It is designed specifically to accommodate Aimpoint T1/T2/H1 pattern red dot sights. There are no readily apparent customization options for the mount itself.

The compatibility is limited to the Aimpoint T1/T2/H1 footprint, so users are restricted to optics within that standard. Aftermarket accessories for the Sub 2000 itself, such as forends and charging handles, remain compatible with the Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount.

Pros and Cons of Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount

Check Best Price HERE

Who Should Buy Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount?

The Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount is perfect for Sub 2000 owners who prioritize maintaining the rifle’s folding capability while adding a red dot optic. It suits those who primarily use their Sub 2000 for recreational shooting or home defense and are willing to occasionally re-zero their optic.

Those who demand absolute zero retention and are willing to sacrifice the folding feature for a more robust mounting solution should skip this product. Competetive shooters who demand more optic rail space should skip this product. A high-quality threadlocker, applied carefully to the mounting screws, is a must-have accessory to help improve zero retention.

Conclusion on Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount

The Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount offers a convenient way to mount a red dot sight on a Kel-Tec Sub 2000 Gen 2 while retaining its signature folding capability. However, the issues with zero retention and potential long-term wear on the pivot mechanism are significant drawbacks. At $99.95, the price is somewhat justified by the convenience it offers, but potential buyers should be aware of its limitations.

I would recommend it with reservations. It is a viable option for those who understand and accept its limitations. Consider other mounting options if consistent zero retention is paramount. Ultimately, the Midwest Industries MI Gen 2 SUB 2000 T1/T2 Red Dot Reflex Sight Mount represents a compromise between convenience and performance.

Check Best Price HERE