First Thoughts on the TruGlo Tru-Tec Micro Remington Red Dot Sight Mount
The TruGlo Tru-Tec Micro Remington Red Dot Sight Mount promises a streamlined solution for adding a red dot optic to some of the most ubiquitous shotguns in existence. This mount targets Remington 870, 1100, 11-87, and Versamax owners looking to modernize their aiming system without extensive gunsmithing. It’s a direct receiver mount designed for TruGlo’s own red dots, and those compatible with the Vortex/Docter footprint.
My personal interest in this mount stemmed from a desire to improve the target acquisition speed of my aging Remington 870 for home defense scenarios. The original bead sight was fine for general purposes, but I wanted the rapid aiming capability a red dot provides, especially in low-light conditions.
Upon unboxing, the mount appeared deceptively simple. It’s a small, matte black piece of metal with a four-post mounting system. Initial impressions suggest it’s lightweight but feels solid enough for its intended purpose, though the finish seemed a little basic. I was hoping it could provide a rock solid and reliable base.
While several other companies offer similar mounts, the TruGlo stood out due to its relatively low price point and the fact that I already owned a TruGlo red dot. This promised better compatibility, or so I hoped. My first impression was cautiously optimistic, intrigued to see how it would perform in a live fire situation.
Real-World Testing: Putting TruGlo Tru-Tec Micro Remington Red Dot Sight Mount to the Test
First Use Experience
I tested the TruGlo Tru-Tec Micro Remington Red Dot Sight Mount at my local outdoor shooting range. The range offered various distances, allowing for accurate zeroing and evaluation of practical accuracy. The weather was clear and sunny, providing ideal conditions for sighting in a red dot optic.
Installation was straightforward using the existing receiver pins. Mounting my TruGlo red dot was simple. My first few shots were off, requiring a good amount of adjustment to zero the optic. The mount itself seemed to hold steady under the recoil of 12-gauge target loads, but I did notice the screws holding the red dot in place loosened slightly after about 25 rounds.
Extended Use & Reliability
After several range sessions spanning a couple of months, the TruGlo Tru-Tec Micro Remington Red Dot Sight Mount has proven functional, though not without its quirks. The mount itself continues to hold firm against the receiver. I did need to apply a thread locker (Loctite) to the red dot mounting screws to prevent them from loosening during extended shooting sessions.
Durability has been acceptable. There are some minor scratches to the finish, but no signs of bending or cracking. Maintenance is simple, involving only occasional cleaning with a lightly oiled cloth to prevent corrosion. Compared to a more expensive, professionally installed rail system, the TruGlo Tru-Tec Micro Remington Red Dot Sight Mount definitely feels less refined, but it gets the job done for recreational shooting.
Breaking Down the Features of TruGlo Tru-Tec Micro Remington Red Dot Sight Mount
Specifications
- Firearm Type: Remington 870/1100/11-87/Versamax. This mount is specifically designed for these popular shotgun models.
- Base: To Receiver/ 4-Post Mounting System. The mount directly replaces the existing receiver pins. It offers a low-profile mounting solution.
- Compatibility: Vortex/Docter footprint. This allows for a wide range of micro red dot sights to be attached.
These specifications are crucial because they dictate which firearms and optics are compatible with the TruGlo Tru-Tec Micro Remington Red Dot Sight Mount. The direct receiver mount ensures a stable platform. The four-post system provides added security against recoil.
Performance & Functionality
The TruGlo Tru-Tec Micro Remington Red Dot Sight Mount performs adequately for its intended purpose: providing a stable base for a red dot optic on a Remington shotgun. Accuracy is improved compared to the factory bead sight. It allows for faster target acquisition, especially in dynamic shooting scenarios.
The primary weakness lies in the potential for screws to loosen, requiring thread locker or frequent checks. The finish is basic and prone to scratching. The mount meets basic expectations for a budget-friendly red dot mounting solution.
Design & Ergonomics
The build quality is acceptable for the price point. The materials feel durable enough to withstand normal shotgun use. The low-profile design of the TruGlo Tru-Tec Micro Remington Red Dot Sight Mount keeps the optic close to the bore axis, which is a definite plus.
The mount is user-friendly and requires minimal tools for installation. The simple design also means there is no significant learning curve involved.
Durability & Maintenance
The mount should last for several years with proper care. Regular cleaning and occasional tightening of screws are necessary to maintain optimal performance. Repair is limited to replacing screws if they become damaged.
Accessories and Customization Options
The TruGlo Tru-Tec Micro Remington Red Dot Sight Mount doesn’t come with any additional accessories beyond the mount itself. Customization options are limited to choosing a compatible red dot sight. The Vortex/Docter footprint is widely supported, allowing for a diverse selection of optics from various brands to be chosen.
Pros and Cons of TruGlo Tru-Tec Micro Remington Red Dot Sight Mount
Pros
- Budget-friendly: The price is significantly lower than many other red dot mounting solutions for shotguns.
- Easy Installation: The drop-in design requires minimal tools and gunsmithing experience.
- Improved Target Acquisition: Enables faster and more precise aiming compared to traditional bead sights.
- Lightweight: Doesn’t add significant weight to the firearm, maintaining its maneuverability.
- Vortex/Docter Footprint Compatibility: Supports a wide range of popular micro red dot sights.
Cons
- Screw Loosening: Mounting screws require thread locker to prevent them from backing out under recoil.
- Basic Finish: The matte black finish is prone to scratching and may not match the aesthetics of higher-end firearms.
Who Should Buy TruGlo Tru-Tec Micro Remington Red Dot Sight Mount?
The TruGlo Tru-Tec Micro Remington Red Dot Sight Mount is perfect for budget-conscious shooters looking to add a red dot optic to their Remington 870, 1100, 11-87, or Versamax shotgun for home defense, recreational shooting, or hunting. It is also suitable for those with limited gunsmithing experience who prefer a simple, drop-in solution.
Those seeking a bombproof, premium mounting solution with advanced features or a more aesthetically pleasing design should skip this product. They should invest in a professionally installed rail system.
Must-have accessories include a quality thread locker (Loctite or similar), a compatible micro red dot sight, and potentially upgraded mounting screws.
Conclusion on TruGlo Tru-Tec Micro Remington Red Dot Sight Mount
The TruGlo Tru-Tec Micro Remington Red Dot Sight Mount provides a functional and affordable way to modernize a Remington shotgun with a red dot optic. It is not without its flaws, primarily the potential for screws to loosen under recoil, but this is easily addressed with a thread locker.
At a price of $34.49, the value proposition is strong. It provides a significant improvement in target acquisition compared to the factory bead sight.
I would personally recommend it to budget-minded shooters seeking a simple and effective red dot mounting solution for their Remington shotgun. If you’re looking to upgrade your shotgun’s aiming system without breaking the bank, give the TruGlo Tru-Tec Micro Remington Red Dot Sight Mount a try.