Trijicon RMR Mount S&W M&P, SD9,40 VE Black Review

First Thoughts on the Trijicon RMR Mount S&W M&P, SD9,40 VE Black

The Trijicon RMR Mount S&W M&P, SD9,40 VE Black is a seemingly simple piece of kit. Yet, it promises a significant upgrade to one’s pistol. This mount allows the user to attach a Trijicon RMR or SRO red dot optic to their Smith & Wesson M&P, SD9, or SD40 VE pistol.

I was seeking a more intuitive aiming system for my M&P. Factory iron sights were proving slow to acquire in dynamic shooting scenarios. I wanted a red dot sight for faster target acquisition and improved accuracy, and this mount seemed like the perfect solution to integrate a high-quality optic into my existing setup.

Unboxing the mount revealed a solid, matte black steel piece. The finish appeared durable and well-applied. It felt substantial in hand, inspiring confidence in its ability to withstand the recoil of repeated firing. Initial impressions were positive, the machining looked clean, and it appeared ready for easy installation.

I considered a few other options, including having my slide milled directly for an RMR. However, the Trijicon mount offered a non-permanent solution. It also saved me the expense and downtime associated with slide milling. The factory rear sight could be reinstalled if desired. I found the Trijicon mount to be a better all-around option.

Excitement tempered with a bit of apprehension best describes my first impression. While the mount looked robust, I wondered how well it would hold zero over time. Also, I hoped the installation process would be as straightforward as it appeared.

Real-World Testing: Putting Trijicon RMR Mount S&W M&P, SD9,40 VE Black to the Test

First Use Experience

I tested the Trijicon RMR Mount S&W M&P, SD9,40 VE Black at an outdoor shooting range. Conditions were sunny and dry. Installation was surprisingly easy; the mount replaced the factory rear sight with minimal fuss using a sight pusher tool. I secured the Trijicon RMR to the mount.

The immediate difference was striking. Target acquisition was significantly faster with the red dot. Follow-up shots were also quicker and more accurate. The Trijicon mount felt secure during firing. I experienced no loosening or shifting during the initial 200 rounds.

Extended Use & Reliability

After several months and over 1000 rounds, the Trijicon RMR Mount S&W M&P, SD9,40 VE Black continues to perform admirably. There are no signs of wear beyond minor cosmetic blemishes on the finish. The mount remains securely attached to the slide, and the RMR maintains its zero consistently.

Cleaning is simple. A quick wipe-down with a lightly oiled cloth after each range session keeps the mount in good condition. The steel construction proves robust against the elements. The mount has proven to be a worthwhile and dependable upgrade.

Compared to my previous experience with iron sights, this setup is a game-changer. It has significantly improved my shooting speed and accuracy. The Trijicon RMR Mount S&W M&P, SD9,40 VE Black has definitely exceeded expectations.

Breaking Down the Features of Trijicon RMR Mount S&W M&P, SD9,40 VE Black

Specifications

The Trijicon RMR Mount S&W M&P, SD9,40 VE Black is specifically designed for Smith & Wesson M&P, SD9, and SD40 VE pistols. It is not compatible with M&P Shield or M&P C.O.R.E. models. The mount replaces the factory rear sight. This provides a platform for mounting Trijicon RMR or SRO red dot sights.

The mount is constructed from steel with a black finish. It provides a durable and corrosion-resistant platform. The steel construction ensures the mount can withstand the stresses of repeated firing. This keeps the optic securely attached to the slide. The black finish helps to reduce glare. It also provides a low-profile appearance.

Performance & Functionality

The Trijicon RMR Mount S&W M&P, SD9,40 VE Black performs its job exceedingly well. It provides a stable and secure platform for mounting a red dot optic. The mount allows for faster target acquisition and improved accuracy. The only drawback is the added height of the optic, which may require taller suppressor-height sights.

The mount is strong and reliable. It maintains zero even after extended use. It provides a noticeable improvement to the usability of the pistol.

Design & Ergonomics

The Trijicon RMR Mount S&W M&P, SD9,40 VE Black boasts a simple, functional design. The steel construction provides a robust feel. The mount adds minimal bulk to the pistol.

The mount is easy to install and use. It requires only basic tools and knowledge. The design allows for co-witnessing with some suppressor-height iron sights.

Durability & Maintenance

The steel construction of the Trijicon RMR Mount S&W M&P, SD9,40 VE Black suggests excellent longevity. Regular cleaning and lubrication will help to maintain its condition. The mount’s simple design minimizes potential points of failure.

Maintenance is straightforward, requiring only occasional cleaning with a solvent and a brush. Proper care will ensure years of reliable service. The Trijicon mount is built to last.

Accessories and Customization Options

The Trijicon RMR Mount S&W M&P, SD9,40 VE Black itself doesn’t come with any accessories. The primary accessory is, of course, a Trijicon RMR or SRO red dot optic. Users may also want to consider suppressor-height iron sights.

The mount is compatible with a wide range of Trijicon RMR and SRO models. This offers considerable customization in terms of dot size and features. Users can choose an optic that best suits their shooting style and needs.

Pros and Cons of Trijicon RMR Mount S&W M&P, SD9,40 VE Black

Check Best Price HERE

Who Should Buy Trijicon RMR Mount S&W M&P, SD9,40 VE Black?

The Trijicon RMR Mount S&W M&P, SD9,40 VE Black is perfect for:

• Owners of Smith & Wesson M&P, SD9, or SD40 VE pistols seeking to upgrade to a red dot optic.
• Competitive shooters looking for faster target acquisition.
• Home defense enthusiasts who want improved accuracy in low-light conditions.
• Law enforcement officers who need a reliable and accurate aiming system.

This product should be skipped by:

• Owners of M&P Shield or M&P C.O.R.E. pistols.
• Those who prefer iron sights and are not interested in red dot optics.

Must-have accessories or modifications:

• A Trijicon RMR or SRO red dot optic.
• Suppressor-height iron sights for co-witnessing (optional).
• A sight pusher tool for easier installation.

Conclusion on Trijicon RMR Mount S&W M&P, SD9,40 VE Black

The Trijicon RMR Mount S&W M&P, SD9,40 VE Black is a worthwhile investment for anyone looking to improve the performance of their compatible Smith & Wesson pistol. It provides a robust and reliable platform for mounting a Trijicon RMR or SRO red dot optic. This, in turn, delivers faster target acquisition and improved accuracy.

The price of $88.99 is justified by the quality of the construction and the significant improvement in shooting performance. I would personally recommend it to anyone who meets the compatibility requirements. It’s a simple yet effective upgrade that can transform your shooting experience. If you own a compatible S&W pistol and are considering adding a red dot, this Trijicon mount is an excellent choice. Give it a try – you won’t be disappointed.

Check Best Price HERE