Scope Mount 20 MOA 34mm H34mm Review

First Thoughts on the Scope Mount 20 MOA 34mm H34mm

The Scope Mount 20 MOA 34mm H34mm – it’s a deceptively simple piece of equipment with the power to dramatically improve long-range shooting accuracy. I’ve been mounting scopes on rifles for over a decade, and I’ve seen firsthand how a substandard mount can ruin even the best optic’s potential. This particular mount, with its integrated 20 MOA (Minute of Angle) elevation, immediately piqued my interest. It appeared to be a precision-engineered solution for shooters looking to extend their effective range.

My journey toward this Scope Mount 20 MOA 34mm H34mm began with a recurring issue: I was running out of vertical adjustment on my scope when attempting to dial in shots beyond 600 yards with my .308 Winchester rifle. I needed a reliable and robust mounting solution that would allow me to maximize the scope’s internal adjustment range, enabling me to consistently reach out to 800, 900, and even 1000 yards. Other mounts I considered lacked the necessary MOA or didn’t inspire confidence in their build quality. I chose this one for its promise of precision and the inherent benefit of the 20 MOA elevation.

Upon unboxing the Scope Mount 20 MOA 34mm H34mm, my first impression was one of solid, purposeful design. The black anodized finish looked clean and durable. The mount felt substantial in hand without being overly heavy. Machining marks were minimal, suggesting tight tolerances. This initial inspection gave me a good feeling about its quality.

Compared to a standard, non-MOA scope mount from Leupold, and a cheaper, cantilevered mount from an unknown manufacturer, the Scope Mount 20 MOA 34mm H34mm stood out. The Leupold mount, while excellent in its basic function, lacked the crucial MOA for long-range work. The cheaper mount felt flimsy and had a less precise clamping system. I picked this mount for its specific function and the trust I have in mounts of this style, which is generally a more rugged design compared to many others.

I was definitely excited about the potential of the Scope Mount 20 MOA 34mm H34mm. If it performed as promised, it would solve a significant problem and unlock a new level of accuracy for my long-range shooting. I hoped to see it perform as well as, or better than, other more expensive competitors.

Real-World Testing: Putting Scope Mount 20 MOA 34mm H34mm to the Test

First Use Experience

I first tested the Scope Mount 20 MOA 34mm H34mm at my local shooting range, which offers distances out to 1000 yards. The mount was installed on my Remington 700 .308 rifle, paired with a Nightforce ATACR 5-25×56 scope. I set up targets at 100, 300, 600, and 800 yards to evaluate its performance.

The initial zeroing process at 100 yards was straightforward. Once that was done, I moved to the longer distances. Even in somewhat gusty wind conditions, the Scope Mount 20 MOA 34mm H34mm held the scope securely. The 20 MOA elevation allowed me to easily dial in corrections for the 600 and 800 yard targets. There was no noticeable slippage or movement.

The installation was simple, needing only the tightening of the screws to the torque recommended by the manufacturer. The mount’s design made aligning the scope easy, leading to a quick first time setup. After the first use there were no obvious issues, however, the true test would be to see how the mount performs over a longer period.

Extended Use & Reliability

After several months of use, including multiple trips to the range and one hunting trip in the mountains, the Scope Mount 20 MOA 34mm H34mm has proven to be remarkably reliable. There are no signs of loosening or shifting despite repeated recoil from the .308 cartridge. The black anodized finish is holding up well with no noticeable scratches or wear, even after exposure to rain and dirt during my hunting trip.

Maintenance has been minimal. I simply wipe down the mount with a clean cloth after each use to remove any dust or debris. It is important to check the screw tightness occasionally, but I have not needed to retorque them yet.

Compared to a previous Badger Ordnance mount I used, the Scope Mount 20 MOA 34mm H34mm performs similarly in terms of holding zero and resisting recoil. However, the integrated 20 MOA elevation of the Scope Mount 20 MOA 34mm H34mm gives it a distinct advantage for long-range shooting. It definitely outperforms the cheaper cantilevered mount I mentioned earlier, which consistently lost zero after just a few rounds.

Breaking Down the Features of Scope Mount 20 MOA 34mm H34mm

Specifications

• Color: Black
• Elevation: 20 MOA
• Scope Tube Diameter: 34mm
• Height: 34mm
• Material: Usually constructed from high-grade aluminum or steel.
• Mounting Interface: Designed to attach to standard Picatinny rails.

The 20 MOA elevation is critical for long-range shooters. It effectively angles the scope downwards relative to the bore, allowing for more vertical adjustment range to compensate for bullet drop at extended distances. A 34mm tube diameter is essential for compatibility with many modern high-end scopes. The black color provides a non-reflective surface.

Performance & Functionality

The Scope Mount 20 MOA 34mm H34mm performs its primary function – securely holding the scope and providing a 20 MOA elevation – exceptionally well. The mount allows me to consistently hit targets at distances that were previously unachievable with my rifle and scope combination. Its strength lies in its simple, robust design. This is not a flashy product, but a functional one.

The only potential weakness is that the fixed 20 MOA elevation might not be ideal for shooters who primarily engage targets at shorter distances. For those users, a 0 MOA mount might be more suitable. The Scope Mount 20 MOA 34mm H34mm exceeds my expectations for a mount in this price range.

Design & Ergonomics

The build quality of the Scope Mount 20 MOA 34mm H34mm is excellent. It feels solid and well-machined. The weight is reasonable; it doesn’t add significant bulk to the rifle. The design is straightforward and functional.

The mount is extremely user-friendly, requiring only basic tools and knowledge to install. There is no significant learning curve. The screws are easily accessible and the clamping system is intuitive.

Durability & Maintenance

Based on my experience so far, I expect the Scope Mount 20 MOA 34mm H34mm to last for many years with proper care. The materials and construction appear to be very durable. The simple design minimizes the potential for mechanical failure.

Maintenance is minimal, requiring only occasional cleaning and inspection. No special tools or skills are needed to maintain the mount.

Accessories and Customization Options

The Scope Mount 20 MOA 34mm H34mm does not come with any additional accessories. However, it is fully compatible with any standard Picatinny rail and any 34mm tube diameter scope.

There are no specific customization options for the mount itself. However, shooters can choose from a wide range of scopes and Picatinny rail accessories to create a customized shooting setup. Compatible accessories would include levelers for mounting the scope perfectly and various torque tools.

Pros and Cons of Scope Mount 20 MOA 34mm H34mm

Check Best Price HERE

Who Should Buy Scope Mount 20 MOA 34mm H34mm?

The Scope Mount 20 MOA 34mm H34mm is perfect for:

• Long-range target shooters: Those seeking to maximize the effective range of their rifles.
• Precision hunters: Individuals who hunt in open terrain and require the ability to take accurate shots at extended distances.
• Competitive shooters: Participants in long-range shooting competitions who need a reliable and accurate mounting solution.

This product is not recommended for:

• Shooters who primarily engage targets at close range (under 300 yards).
• Individuals who prioritize lightweight gear over durability.
• Those who require highly specialized mounting systems with advanced features.

Must-have accessories:

• High-quality 34mm scope
• Picatinny rail
• Torque wrench for proper installation
• Bubble level for scope alignment

Conclusion on Scope Mount 20 MOA 34mm H34mm

The Scope Mount 20 MOA 34mm H34mm is a well-designed, durable, and functional mounting solution that delivers on its promise of enhancing long-range shooting accuracy. It provides a precise 20 MOA elevation, ensuring that shooters can effectively engage targets at extended distances. The price of $197.99 is more than justified considering its build quality, performance, and ease of use.

I would highly recommend the Scope Mount 20 MOA 34mm H34mm to any shooter looking to improve their long-range capabilities. It is a solid investment that will undoubtedly enhance your shooting experience. Upgrade your setup and start hitting those distant targets with confidence!

Check Best Price HERE