Talley Black Anodized 1″ High Extended Rings/Base Set For Reming Review

First Thoughts on the Talley Black Anodized 1″ High Extended Rings/Base Set For Reming

The Talley Black Anodized 1″ High Extended Rings/Base Set For Reming promises a lightweight, yet robust, mounting solution for Remington 700 rifles. Its one-piece construction and extended design immediately caught my eye.

I needed a reliable mounting system for my recently acquired vintage Remington 700 chambered in .30-06. This rifle, while a tack driver, has always been a pain to scope properly due to its action length and my preference for a generous eye relief. Traditional two-piece bases often left me wanting more flexibility.

The Talley rings/base set arrived in simple, functional packaging. My initial impression was one of quality; the black anodized finish was smooth and even, and the machining looked precise. Picking them up, they felt surprisingly light, a definite plus for a hunting rifle that already carries some heft.

I considered other options, including steel rings and bases from Leupold and Warne. However, the Talley system’s integrated design and reputation for lightweight durability ultimately swayed my decision. The one-piece construction theoretically eliminates a potential point of failure, and the extended design offered the flexibility I craved for optimal scope placement. I was cautiously optimistic; the promise of a lightweight, rock-solid mount at this price point seemed almost too good to be true.

Real-World Testing: Putting Talley Black Anodized 1″ High Extended Rings/Base Set For Reming to the Test

First Use Experience

My first range session with the Talley Black Anodized 1″ High Extended Rings/Base Set For Reming involved sighting in a new Leupold VX-3i 3.5-10×40 scope on my Remington 700. The setup was performed on a crisp autumn day, with temperatures hovering around 45 degrees Fahrenheit.

Installation was straightforward, requiring only basic tools and a torque wrench to ensure proper tension. The extended design allowed me to perfectly position the scope for comfortable eye relief, something I had struggled with previously. After zeroing at 100 yards, I ran through a series of drills, firing approximately 60 rounds of varying bullet weights. The rings held zero perfectly, even after some deliberate bumping and jostling of the rifle.

Extended Use & Reliability

After several months of use, including a deer hunting season in the mountains of Montana, the Talley Black Anodized 1″ High Extended Rings/Base Set For Reming has proven remarkably reliable. It has endured temperature swings from below freezing to mild, sunny days without issue.

I’ve encountered no signs of loosening or shifting, and the black anodized finish remains largely unscathed, despite some exposure to brush and inclement weather. Cleaning has been simple; a quick wipe-down with a lightly oiled cloth is all that’s needed. Compared to the older steel rings I used previously, the Talley system’s lightweight construction is a noticeable improvement, especially during long days in the field. It has definitely exceeded my initial expectations.

Breaking Down the Features of Talley Black Anodized 1″ High Extended Rings/Base Set For Reming

Specifications

The Talley Black Anodized 1″ High Extended Rings/Base Set For Reming boasts a streamlined design built for durability and precision. It features a one-piece construction, extruded from 7000 series alloy.

The system is CNC-machined for exacting tolerances. It is designed specifically for Remington 700 rifles and accommodates scopes with 1-inch tubes. The “high” mount height provides ample clearance for larger objective lenses. The matte black finish minimizes glare and resists corrosion.

Performance & Functionality

The primary function of the Talley Black Anodized 1″ High Extended Rings/Base Set For Reming is to securely and accurately mount a scope to a rifle. In this regard, it excels. It holds zero consistently, even under recoil and rough handling.

The one-piece design eliminates potential weak points found in traditional two-piece systems, enhancing rigidity. The extended design allows for greater flexibility in scope placement, critical for achieving optimal eye relief. While lightweight, the Talley system feels solid and dependable. The only potential downside is the lack of adjustability for windage, requiring shimming if the rifle’s receiver isn’t perfectly aligned.

Design & Ergonomics

The Talley Black Anodized 1″ High Extended Rings/Base Set For Reming prioritizes functionality over elaborate aesthetics. The simple, clean design is unobtrusive and complements the lines of the Remington 700.

The lightweight alloy minimizes added weight, enhancing the rifle’s balance and handling. Installation is relatively simple, even for those with limited experience. However, proper torque is crucial to ensure a secure and damage-free fit.

Durability & Maintenance

Constructed from 7000 series alloy and finished with a durable black anodizing, the Talley Black Anodized 1″ High Extended Rings/Base Set For Reming is built to last. It resists corrosion and wear from the elements.

Maintenance is minimal; regular cleaning with a soft cloth is sufficient. The one-piece design simplifies cleaning compared to multi-piece systems.

Accessories and Customization Options

The Talley Black Anodized 1″ High Extended Rings/Base Set For Reming comes as a complete unit, with no additional accessories included. However, it is compatible with a wide range of 1-inch scopes from various manufacturers, including Leupold, Vortex, and Nightforce.

The high mount height provides clearance for scopes with larger objective lenses, offering some degree of customization in terms of optic selection. There are no aftermarket parts designed specifically for the Talley system, emphasizing its minimalist, integrated design.

Pros and Cons of Talley Black Anodized 1″ High Extended Rings/Base Set For Reming