The BM-3 Century C39V2/RAS47 Accessory Mount Made a Bold First Impression
The BM-3 Century C39V2/RAS47 Accessory Mount, from an unspecified manufacturer, promises a simple solution for adding accessories to two of the most popular AK variants. This lightweight mount aims to provide a stable platform for optics, lights, or lasers on the sometimes-challenging C39V2 and RAS47 rifles. As a long-time AK enthusiast, I was eager to see if it lived up to the hype.
I had been searching for a low-profile optic mounting solution for my RAS47. The factory side rail sits too high for comfortable use with many red dots, and I wanted something that wouldn’t add significant weight or bulk to the rifle. Several other mounts exist, but many are either overly complex or require permanent modifications.
The BM-3 Century C39V2/RAS47 Accessory Mount arrived in a small, unassuming package. The mount itself is surprisingly lightweight, and the black finish appears durable. Initial impressions suggest a well-machined piece of kit.
Compared to a full-length Picatinny rail handguard, the BM-3 Century C39V2/RAS47 Accessory Mount seemed much more streamlined. I had considered a side-rail mounted optic, but those tend to shift the weight balance of the rifle considerably. This option offered a minimalist approach to accessory mounting.
I was initially excited by the simplicity of the design. I also felt a little cautious, hoping that the small size wouldn’t compromise stability.
Real-World Testing: Putting BM-3 Century C39V2/RAS47 Accessory Mount to the Test
First Use Experience
My first test was at an outdoor range, focusing on close- to mid-range targets. I attached a red dot sight to the BM-3 Century C39V2/RAS47 Accessory Mount and ran through various drills. The weather was clear and sunny, providing optimal conditions.
The BM-3 Century C39V2/RAS47 Accessory Mount held zero surprisingly well during the initial session. The red dot sight remained stable throughout several magazines.
The installation process was straightforward, requiring only a few minutes. I appreciated the low-profile design, as it didn’t interfere with the rifle’s handling. However, I did notice a slight shift in zero after about 100 rounds, requiring a minor adjustment.
Extended Use & Reliability
After several range trips and approximately 500 rounds fired, the BM-3 Century C39V2/RAS47 Accessory Mount has shown both strengths and weaknesses. The mount has stayed securely attached to the rifle.
There are a few minor scratches on the finish. The mount continues to hold zero adequately for most shooting scenarios, although it still requires occasional adjustments after extended use.
Cleaning is simple, requiring only a quick wipe down with a cloth. While the mount is an improvement over other options I’ve tried, it doesn’t fully solve the challenges of mounting optics on the C39V2/RAS47 platform.
Breaking Down the Features of BM-3 Century C39V2/RAS47 Accessory Mount
Specifications
The BM-3 Century C39V2/RAS47 Accessory Mount is specifically designed for Century Arms C39V2 and RAS47 rifles. This ensures a proper fit and stable mounting.
The mount’s dimensions are 1.57 x 0.86 x 1.26 inches. This compact size minimizes bulk and weight.
The mount weighs only 0.9 oz. This extremely lightweight design avoids adding unnecessary weight to the rifle.
The mount’s purpose is to provide a Picatinny rail section for attaching accessories like optics, lights, or lasers. It offers increased versatility to these rifles.
These specifications are important because they address the common concerns of AK owners seeking accessory mounting solutions. The low weight and compact size preserve the rifle’s handling characteristics.
Performance & Functionality
The primary function of the BM-3 Century C39V2/RAS47 Accessory Mount is to provide a stable platform for accessories. It performs this task adequately, maintaining a reasonable zero for most shooting conditions.
The mount’s main strength is its ease of installation and low-profile design. However, its weakness lies in its tendency to require occasional zero adjustments after extended use.
The mount meets basic expectations for an accessory mounting solution but doesn’t exceed them. It offers a simple, lightweight option but lacks the rock-solid stability of more robust (and often heavier) alternatives.
Design & Ergonomics
The BM-3 Century C39V2/RAS47 Accessory Mount is constructed from what appears to be a lightweight aluminum alloy with a black finish. The construction is simple and functional, without unnecessary frills.
The mount adds minimal weight to the rifle and does not interfere with its ergonomics. The installation process is relatively user-friendly, requiring only basic tools and minimal gunsmithing knowledge.
There is a slight learning curve in understanding how to properly torque the mounting screws to achieve optimal stability. However, the design is generally intuitive and easy to use.
Durability & Maintenance
The BM-3 Century C39V2/RAS47 Accessory Mount appears to be reasonably durable, showing only minor signs of wear and tear after several range trips. The lightweight aluminum construction should withstand moderate use.
Maintenance is simple, requiring only occasional cleaning with a cloth and solvent. The mount’s simple design minimizes the risk of parts breaking or requiring replacement.
The mount’s long-term durability remains to be seen, but it appears to be a decent option for those seeking a lightweight and low-maintenance accessory mounting solution.
Accessories and Customization Options
The BM-3 Century C39V2/RAS47 Accessory Mount itself doesn’t come with any accessories. However, it’s designed to be compatible with any accessory that mounts to a standard Picatinny rail.
Users can attach various optics, including red dot sights, holographic sights, and low-power variable optics (LPVOs). Lights and lasers can also be mounted to the rail for tactical applications.
The mount’s compatibility with standard Picatinny accessories allows for a high degree of customization. This makes it a versatile option for shooters looking to personalize their C39V2 or RAS47 rifles.
Pros and Cons of BM-3 Century C39V2/RAS47 Accessory Mount
Pros
- Provides a Picatinny rail for mounting optics and accessories.
- Extremely lightweight, adding minimal bulk to the rifle.
- Simple and easy to install, requiring no gunsmithing.
- Low-profile design that doesn’t interfere with handling.
- Affordable compared to other mounting solutions.
Cons
- May require occasional zero adjustments after extended use.
- Not as robust or stable as heavier, more expensive options.
Who Should Buy BM-3 Century C39V2/RAS47 Accessory Mount?
The BM-3 Century C39V2/RAS47 Accessory Mount is perfect for C39V2 and RAS47 owners looking for a lightweight and affordable way to mount optics or accessories. It’s ideal for recreational shooters, plinkers, and those who prioritize weight savings.
This product is not suitable for users who require absolute, rock-solid zero retention for precision shooting or tactical applications. It’s also not recommended for those who plan to mount heavy or bulky accessories.
A must-have accessory for this mount is a high-quality thread-locking compound to ensure the mounting screws stay secure. Regularly checking the torque of the screws is also essential for maintaining zero.
Conclusion on BM-3 Century C39V2/RAS47 Accessory Mount
The BM-3 Century C39V2/RAS47 Accessory Mount offers a practical and budget-friendly solution for adding accessories to these popular AK variants. While it may not be the most robust or stable option on the market, its lightweight design and ease of installation make it a worthwhile consideration.
At $75.49, the price is reasonable for what you get. The BM-3 Century C39V2/RAS47 Accessory Mount provides a functional Picatinny rail without adding unnecessary weight or bulk to your rifle.
I would recommend the BM-3 Century C39V2/RAS47 Accessory Mount to casual shooters and AK enthusiasts who prioritize simplicity and affordability. If you need a no-frills, lightweight mounting solution for your C39V2 or RAS47, this is a solid option. Give it a try and see if it meets your needs!