ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin Review

The ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin Made a Bold First Impression

The ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin promises to address a common need for Taurus 709 Slim owners: increased capacity and an extended grip. The Taurus 709 Slim is a popular concealed carry pistol, known for its slim profile, but its standard magazine capacity can feel limiting. The promise of 10 rounds in a flush-ish magazine, along with an extended grip area, immediately piqued my interest as a potential upgrade for a pistol I often carry.

I’ve been a 709 Slim owner for years and while I appreciate its concealability, I always felt the grip was a bit short for my hands, impacting my control, especially during rapid fire. I was looking for a magazine that would give me a better purchase on the gun and a few extra rounds without significantly compromising its concealability. The ProMag offering seemed to strike a good balance.

The magazine arrived in typical blister-pack packaging. My initial impression was that the steel construction felt robust, though the blued finish appeared somewhat uneven in certain areas. The extended grip sleeve, made of polymer, felt a little loose, but I reserved judgment until I could test it with live rounds.

I considered options from Taurus themselves (though they don’t offer a 10-round magazine for the 709 Slim), as well as other aftermarket brands like Mec-Gar, known for their high-quality magazines. I ultimately chose the ProMag due to its competitive price point and the promise of both increased capacity and an extended grip. My initial excitement was tempered by the typical concerns surrounding aftermarket magazines – reliability and proper fit.

Real-World Testing: Putting ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin to the Test

First Use Experience

I tested the ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin at my local outdoor shooting range. The weather was dry and sunny, ideal for testing a new magazine. I loaded the magazine with 10 rounds of standard 115-grain FMJ ammunition.

The first loading was a bit stiff; getting that 10th round in required some effort. Initially, I experienced a few failures to feed during the first couple of magazines. However, after running about 50 rounds through it, the magazine seemed to break in, and the feeding issues subsided.

Extended Use & Reliability

After several weeks of use and approximately 200 rounds fired, the ProMag magazine has proven reasonably reliable, though not flawless. I experienced occasional failures to feed, roughly one or two per 100 rounds, particularly with hollow-point ammunition. The blued finish shows some wear around the feed lips and magazine catch, but nothing excessive.

Cleaning is straightforward; a quick wipe-down with a lightly oiled cloth after each range session is sufficient. Compared to my factory Taurus magazine, the ProMag doesn’t quite match the same level of consistent reliability. The grip extension still slides a little, which is annoying when loading but doesn’t affect function when installed.

Breaking Down the Features of ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin

Specifications

• Caliber: 9mm. This magazine is specifically designed for the 9mm Taurus 709 Slim.
• Capacity: 10 rounds. It offers a significant increase over the standard 7 or 8 round magazines.
• Finish: Blued steel. The blued finish provides some corrosion resistance but may wear over time.
• Origin: Aftermarket. This magazine is manufactured by ProMag and not Taurus.

These specifications are crucial because they directly impact the functionality and suitability of the magazine. The increased capacity addresses the common complaint about the 709 Slim’s limited round count. The aftermarket origin means that quality control might not be as stringent as with factory magazines, which affects reliability.

Performance & Functionality

The ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin generally performs its primary job: holding and feeding 9mm rounds into the Taurus 709 Slim. However, its performance isn’t without caveats. The magazine’s main strength is the increased capacity and enhanced grip.

The feeding reliability with FMJ ammunition is acceptable after a break-in period. The magazine’s primary weakness is its occasional feeding issues, particularly with hollow-point rounds, and the somewhat loose grip extension. It mostly meets expectations as a range magazine, but I wouldn’t trust it implicitly for concealed carry without extensive testing.

Design & Ergonomics

The ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin is constructed from steel, giving it a robust feel. The extended grip sleeve is made of polymer. The weight is slightly more than the factory magazine due to the added capacity and the grip extension.

The build quality is decent for an aftermarket magazine, although the blued finish is not perfect. The loose grip extension is a minor annoyance. The magazine is relatively user-friendly; however, the initial stiffness when loading to full capacity requires some effort.

Durability & Maintenance

The magazine appears to be reasonably durable. After several range trips, there are signs of wear on the finish, but the steel body seems solid. The magazine is easy to disassemble for cleaning and maintenance. Regular cleaning and lubrication will likely extend its lifespan.

Accessories and Customization Options

The magazine itself doesn’t offer much in the way of customization. It is what it is: a 10-round magazine with a grip extension. It is compatible with the Taurus 709 Slim, and it provides an extended grip surface. There aren’t specific accessories designed for this particular magazine, but aftermarket magazine pouches designed for single-stack 9mm magazines should work.

Pros and Cons of ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin

Check Best Price HERE

Who Should Buy ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin?

The ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin is perfect for range shooters who want increased capacity and a better grip on their Taurus 709 Slim without spending a fortune. It is also suitable for those who find the factory magazine’s grip too short.

Those who should skip this product are individuals who prioritize absolute reliability for concealed carry purposes. If flawless function is paramount, a factory magazine or a magazine from a more reputable aftermarket manufacturer (like Mec-Gar) would be a better choice.

A must-have modification would be to glue the grip extension in place to prevent it from sliding.

Conclusion on ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin

The ProMag Taurus 709 Slim (Post-2009) 9mm 10 rd Steel Blued – 9mm Caliber, 10 Rounds, Steel, Aftermarket Origin offers a decent value proposition for Taurus 709 Slim owners seeking increased capacity and an improved grip. The price is definitely justified for a range magazine.

While I wouldn’t recommend it without reservation for concealed carry due to its occasional reliability issues, it serves well as an affordable upgrade for range practice. I would personally recommend it with the caveat that you should thoroughly test it with your preferred ammunition before relying on it for self-defense. If you’re looking for a cheap way to enhance your Taurus 709 Slim at the range, give this magazine a try.

Check Best Price HERE