The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber Made a Bold First Impression
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber promises enhanced control and a more secure hold on one of the most popular pistol platforms in the world. Designed to fit Glock Gen 3 models 17, 22, 24, 31, 34, 35, and 37, this grip aims to improve handling without adding significant bulk. The textured rubber material and the promise of easy installation piqued my interest, setting the stage for a thorough evaluation.
My search for a better grip began after a particularly slick range day. Even with thoroughly cleaned hands, I was struggling to maintain a consistent grip on my Glock 17 Gen 3 during rapid-fire drills. I needed an affordable and easily installed solution that would improve my purchase without requiring permanent modification of the frame.
The Talon Grips arrived in a simple, unassuming package. Upon opening it, I immediately noticed the precise cutouts and the distinct texture of the “Moss” rubber. The grip felt thin yet robust, inspiring confidence that it would provide a substantial improvement without interfering with holstering.
I considered several competing products, including stippling and full replacement grips. However, stippling is permanent, and replacement grips can be expensive and require gunsmithing. The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber seemed like the perfect balance of performance, price, and ease of installation.
My initial impression was positive, bordering on excited. The texture felt aggressive without being abrasive, and the fit appeared perfect for my Glock 17 Gen 3. I was eager to get it installed and see if it lived up to its promise of enhanced grip and control.
Real-World Testing: Putting Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber to the Test
First Use Experience
My first test of the Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber was at an outdoor shooting range. I ran approximately 200 rounds through my Glock 17 Gen 3 in varying conditions, from bright sunshine to light drizzle. The enhanced grip was immediately noticeable, providing a much more secure and confident hold.
In the light drizzle, where the factory Glock grip would have become dangerously slick, the Talon Grips maintained a solid purchase. I was able to maintain a consistent shooting stance and accurate shot placement even with slightly damp hands. The grip conformed seamlessly, offering a very positive feel.
Installation was straightforward, taking only about 10 minutes after watching Talon Grips‘ installation video online. Initially, I was concerned about the adhesive holding up during extended use. However, the provided cleaning pad and the quality of the adhesive assuaged my concerns.
There were no major issues, although I did notice a slight amount of “tackiness” when drawing from a Kydex holster. This subsided after a few draws and didn’t hinder my performance. Overall, the first range session was a resounding success.
Extended Use & Reliability
After three months of regular use, the Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber continues to perform admirably. I have put approximately 1500 rounds through my Glock 17 Gen 3 since installing the grip. The grip has been tested in hot, humid conditions during summer training, and it has not deteriorated.
The grip shows minimal signs of wear and tear, with only slight smoothing of the texture in high-contact areas. The adhesive remains strong, and there are no signs of peeling or shifting. Regular cleaning with a damp cloth has been sufficient to maintain its appearance and performance.
The Talon Grips has vastly outperformed my expectations compared to the factory Glock grip. It has also exceeded my experience with other adhesive grip solutions I’ve used in the past, which tended to peel or lose their texture quickly. The durable, textured rubber and robust adhesive of the Talon Grips have proven to be a winning combination.
Breaking Down the Features of Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber
Specifications
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber features a precision-cut design tailored specifically for Glock Gen 3 models 17, 22, 24, 31, 34, 35, and 37. It utilizes a low-profile, textured rubber material that adds minimal bulk to the grip. The grip offers full side panel coverage, including the thumb rest, trigger guard, and high coverage on the backstrap.
The adhesive is a high-strength, pressure-sensitive formulation designed to withstand heat, moisture, and abrasion. The package includes a cleaning pad to ensure proper adhesion to the firearm’s frame. Importantly, the grip maintains compatibility with the Rough Textured Frame (RTF) found on some Glock models.
These specifications are vital because they ensure a precise fit, a comfortable and secure grip, and long-lasting performance. The low profile ensures minimal interference with concealed carry, while the textured rubber provides exceptional purchase even in adverse conditions. The high-strength adhesive ensures that the grip remains firmly in place, even during rigorous use.
Performance & Functionality
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber dramatically improves the handling and control of the Glock platform. The textured rubber provides a non-slip surface that allows for a more secure grip, reducing muzzle flip and improving accuracy. This is most noticeable during rapid-fire scenarios and when shooting with wet or gloved hands.
The grip conforms seamlessly to the Glock frame, providing a comfortable and ergonomic feel. The cutouts for the Glock emblem are precisely placed, maintaining the pistol’s aesthetic. The enhanced grip allows for faster target acquisition and improved overall shooting performance.
The grip’s main strength lies in its ability to enhance control without significantly altering the firearm’s ergonomics. The only potential weakness is the initial “tackiness” when drawing from certain holsters, which diminishes with use. Overall, the grip meets and exceeds expectations, providing a significant improvement in handling and control.
Design & Ergonomics
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber boasts a well-thought-out design that prioritizes both function and aesthetics. The textured rubber material provides an excellent grip surface without being overly abrasive. The low-profile design adds minimal bulk, ensuring comfortable carry and preventing interference with holstering.
The grip’s ergonomics are enhanced by its seamless integration with the Glock frame. The placement of the grip panels and the high backstrap coverage promote a more consistent and comfortable grip. Installation is straightforward, and the grip requires no permanent modifications to the firearm.
The grip is exceptionally user-friendly, requiring minimal effort to install and providing immediate benefits in terms of handling and control. There is virtually no learning curve, and the grip enhances the shooter’s confidence from the first shot. The Talon Grips provides a great feel in hand.
Durability & Maintenance
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber is designed to withstand the rigors of regular use. The high-strength adhesive ensures that the grip remains firmly in place, even under demanding conditions. The textured rubber material is resistant to abrasion and wear, ensuring long-lasting performance.
Maintenance is simple, requiring only a damp cloth to remove dirt and debris. The grip is also resistant to oils and solvents, ensuring that it maintains its texture and appearance over time. With proper care, the Talon Grips should provide years of reliable service.
Accessories and Customization Options
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber is designed as a standalone enhancement and doesn’t require any specific accessories. However, it is compatible with a wide range of Glock accessories, including aftermarket sights, triggers, and extended magazine releases. The grip does not interfere with the use of any standard Glock holsters.
While not a customization option in the traditional sense, Talon Grips offers a variety of textures and colors to suit individual preferences. This allows users to personalize their firearm while benefiting from the enhanced grip and control provided by the product. This combination of compatibility and personalization makes the Talon Grips a versatile addition to any Glock.
Pros and Cons of Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber
Pros
- Significantly enhances grip and control, especially in adverse conditions.
- Easy to install and requires no permanent modifications to the firearm.
- Provides a comfortable and ergonomic feel.
- Durable and long-lasting with proper care.
- Affordable and provides excellent value for the money.
Cons
- The initial “tackiness” when drawing from certain holsters may require a break-in period.
- May need replacement after extended use (years) depending on use and abuse.
Who Should Buy Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber?
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber is perfect for: anyone looking to improve the grip and control of their Glock 17, 22, 24, 31, 34, 35, or 37 Gen 3 pistol. This includes competitive shooters, law enforcement officers, military personnel, and anyone who carries a Glock for self-defense. Those who live in hot or humid climates will especially benefit from the enhanced grip provided by the Talon Grips.
This product might not be ideal for individuals who prefer the factory Glock grip or those who are looking for a more permanent grip modification, such as stippling. If you prefer an untextured grip, this isn’t for you.
A must-have accessory to pair with the Talon Grips is a high-quality holster that is compatible with the modified grip. Regularly cleaning the grip with a damp cloth will also help to maintain its performance and longevity.
Conclusion on Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber
The Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber is an excellent and affordable upgrade for any Glock owner looking to improve their grip and control. Its easy installation, comfortable ergonomics, and durable construction make it a standout product in the market. The grip enhances shooting performance and safety.
At a price of $19.99, the Talon Grips offers exceptional value for the money. The improvement in handling and control far outweighs the minimal cost.
I would highly recommend the Talon Grips Adhesive Grip For Glock 17,22,24,31,34,35,37 Gen3 Textured Moss Rubber to anyone seeking a simple, effective, and affordable way to enhance their Glock pistol. Upgrade your grip today and experience the difference!