The Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap Made a Bold First Impression
For years, I’ve preached the importance of a solid grip. It’s not just about control; it’s about confidence. And when it comes to compact Glocks, like the 26, 27, 28, 33, and 39 Gen4, maximizing that grip can be a challenge. That’s where the Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap enters the picture, promising enhanced handling without adding significant bulk.
I’ve always struggled with the ergonomics of the subcompact Glocks. My hands aren’t small, and the factory grip, even with the interchangeable backstraps, felt lacking, especially during rapid fire drills. I needed a solution that offered a more secure and comfortable hold, improving my overall accuracy and control.
The Talon Grips arrived in simple packaging, but the quality was immediately apparent. The pre-cut rubberized texture felt grippy and reassuring in my hands. It was clear that Talon Grips had put some thought into the design, carefully considering the contours of the Glock frame and medium backstrap.
I considered options from Hogue and even some stippling kits, but the Talon Grips offered a non-permanent solution. I appreciated the fact that I could experiment with it and easily remove it without damaging the frame. My initial excitement was tempered with a bit of skepticism, but the promise of improved grip without permanent modifications was enticing.
My first impression was overwhelmingly positive. The Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap looked like a simple, yet effective upgrade to the Glock’s factory feel.
Real-World Testing: Putting Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap to the Test
First Use Experience
I tested the Talon Grips at my local shooting range on a blustery Saturday morning. The goal was to assess how well the grip held up under sustained fire and varying grip pressures. It was important to understand how the Talon Grips would feel during rapid target acquisition and follow-up shots.
Even in the damp conditions, the textured rubber provided a noticeable improvement in grip compared to the bare polymer frame. Recoil felt more manageable, and I experienced less muzzle flip during rapid firing. I didn’t need to constantly readjust my grip between shots.
The installation process was simple, requiring only a few minutes with a hair dryer to properly adhere the grip. There was a slight learning curve in getting used to the increased friction against my skin, but the positive control quickly outweighed any initial discomfort. I was pleasantly surprised.
Extended Use & Reliability
After several months of regular use, the Talon Grips are still holding up remarkably well. There’s minimal wear and tear on the edges, and the adhesive remains strong. The texture remains grippy.
Cleaning is simple; a quick wipe-down with a damp cloth is all it takes to remove any sweat or grime. The grip hasn’t shifted or peeled, even after hundreds of rounds and regular exposure to cleaning solvents (avoiding aerosol based, as recommended). This speaks volumes about the quality of the adhesive and the durability of the rubber material.
Compared to the stock Glock grip, the Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap is a significant upgrade. It provides a more secure and comfortable hold, leading to improved accuracy and control. It has outperformed my expectations in terms of durability and enhanced weapon handling.
Breaking Down the Features of Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap
Specifications
- Type: Adhesive Grip. This means the grip is attached to the firearm frame using a strong adhesive, offering a non-permanent modification that can be removed if desired.
- Firearm Type: Glock 26/27/28/33/39 Gen4. The Talon Grips are specifically designed to fit these Glock models, ensuring a precise and secure fit.
- Firearm Model: Glock 26,27,28,33,39 Gen4. Compatibility is critical for proper installation and performance.
- Material: Rubber. The rubber material provides a comfortable and grippy surface, enhancing control and reducing recoil felt by the shooter.
- Finish: Textured. The textured finish further improves grip, especially in wet or sweaty conditions, providing a more secure hold.
- Features: Medium Backstrap. The grip is designed to be used with the Glock Gen4 medium backstrap, tailoring the grip to individual hand sizes for better ergonomics.
These specifications are important because they dictate the overall feel and performance of the grip. The adhesive ensures a secure fit, while the rubber material and textured finish enhance grip and control.
Performance & Functionality
The Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap significantly enhances the performance and functionality of the Glock. The improved grip allows for better control during rapid fire and reduces muzzle flip. The grip makes the firearm feel more secure.
One significant strength is the ease of installation and the immediate improvement in grip. A potential weakness is the relatively thin material, which might not offer enough padding for those with very sensitive hands. The Talon Grips met my expectations by providing a substantial improvement in grip and weapon control.
Design & Ergonomics
The build quality is excellent, with the pre-cut design fitting the Glock frame perfectly. The rubber material is comfortable in hand, and the textured surface enhances grip without being overly aggressive. The overall weight increase is negligible.
The Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap is very user-friendly, requiring minimal effort to install and get used to. No special tools are needed, just a heat source for proper adhesion.
Durability & Maintenance
With proper installation, the Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap is expected to last for a significant amount of time under normal usage. Regular cleaning and avoiding harsh solvents will further extend its lifespan.
The grips are easy to maintain and repair; a simple wipe-down is all that’s needed for cleaning. If the adhesive ever starts to fail, replacement grips are readily available.
Accessories and Customization Options
The Talon Grips themselves don’t come with any additional accessories beyond the grip panels themselves. However, they’re fully compatible with most standard Glock accessories, such as holsters, lights, and lasers. The Talon Grips do not interfere with these functionalities.
While the Talon Grips are designed to work with the medium backstrap, users can still experiment with different aftermarket triggers and other internal components. The grip does not prevent using other parts.
Pros and Cons of Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap
Pros
- Significantly improved grip texture enhances control and reduces muzzle flip.
- Easy to install and remove without damaging the firearm.
- The low profile design adds minimal bulk to the firearm.
- Durable rubber material holds up well under regular use.
- Affordable price point offers excellent value for the money.
Cons
- The thin material might not provide enough cushioning for users with sensitive hands.
- Adhesive application requires careful attention to detail to ensure a secure fit.
Who Should Buy Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap?
The Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap are perfect for concealed carriers who want enhanced grip without added bulk. They are also well-suited for range shooters seeking better control and improved accuracy. Anyone who finds the factory Glock grip inadequate will benefit from this product.
Those looking for a more permanent and aggressive grip solution, like stippling, should skip this product. Similarly, if you have very large hands and require a substantial grip increase, you might want to explore alternative options. No must-have accessories or modifications are needed, but a good quality holster is recommended to accommodate the slightly increased grip texture.
Conclusion on Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap
The Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap are a fantastic addition to any Gen4 Glock 26, 27, 28, 33, or 39. It offers a noticeable improvement in grip and control without sacrificing concealability or adding significant bulk. Talon Grips offers an outstanding value for its price.
The price of $17.99 is absolutely justified, considering the enhanced performance and improved handling that these grips provide. I personally recommend the Talon Grips 117R Adhesive Grip Textured Black Rubber for Glock 26,27,28,33,39 Gen4 with Medium Backstrap to anyone looking to upgrade their Glock’s grip. Improve your shooting experience and enhance your weapon control.