Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 Review

The Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 Made a Bold First Impression

As a seasoned outdoor and tactical gear specialist, I’ve seen my fair share of cleaning supplies. However, the Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 from an unnamed manufacturer immediately caught my attention with their promise of superior bore cleaning and American-made quality. The claim of using exclusive spec, 100% cotton flannel, finished on both sides for maximum absorption, piqued my interest.

My biggest problem, especially with my precision rifles, has always been effectively removing fouling without damaging the bore. I needed a patch that could lift residue instead of grinding it into the rifling. The Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 seemed to offer that solution.

Upon receiving the package, the first thing I noticed was the neatly packed quantity of 500 patches. The flannel material felt soft and substantial, hinting at its absorbent capabilities.

Compared to the generic cotton patches I’ve used in the past, these felt like a significant upgrade. I chose these specifically because of the size and claimed material benefits over thinner, less consistent cotton alternatives I’ve used from brands like Hoppe’s and generic bulk patch suppliers. Initial impressions were good; I was cautiously optimistic, eager to see if they lived up to the hype.

Real-World Testing: Putting Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 to the Test

First Use Experience

My initial testing ground was at the range, cleaning my 6mm Creedmoor benchrest rifle after a day of precision shooting. I tested these patches in both dry and lightly oiled applications. The patches slipped smoothly through the bore, effectively grabbing the carbon and copper fouling.

The weather was typical for an early fall day at the range – a bit breezy and dusty. Even with the dry conditions, the patches seemed to maintain their integrity without shredding or leaving fibers behind. Using a quality bore guide is critical to ensure consistent results and minimize solvent contact with the action.

There was no need to adjust my usual cleaning routine to accommodate the patch’s size or material. The 1.75-inch square dimensions were perfect for a snug fit in my 6mm bore.

Extended Use & Reliability

After several months of consistent use across multiple rifles (6mm Creedmoor, .308 Winchester, and 7mm Remington Magnum), the Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 have proven their reliability. They consistently deliver a cleaner bore with fewer passes compared to my older cleaning methods. I also used them to clean pistol barrels, although a different patch size would be preferable.

I’ve noticed no significant wear and tear on the patches themselves. The flannel material has held up remarkably well, resisting tearing and maintaining its shape even after repeated use with aggressive solvents. Regular cleaning of my cleaning rod and jags, prevents the patches from picking up unwanted contaminents from prior cleaning sessions.

Maintenance is straightforward: simply dispose of the used patches after each cleaning session. There’s no need for any special cleaning or care procedures, which saves me valuable time. These patches consistently outperform the cheaper alternatives I’ve used in the past, justifying the slightly higher cost.

Breaking Down the Features of Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50

Specifications

• Caliber/Gauge: 7mm-.38/6mm Benchrest
• Quantity: 500
• Material: 100% Cotton Flannel
• Size: 1.75 Inch Square
• Construction: American Made, Double-Sided Finish

These specifications are crucial for effective bore cleaning. The caliber compatibility ensures a snug fit for optimal residue removal. The high quantity provides long-term value. The 100% cotton flannel construction maximizes absorbency. The double-sided finish ensures even cleaning performance.

Performance & Functionality

The Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 excel at their primary function: cleaning firearm bores effectively. They remove carbon fouling, powder residue, and copper deposits with minimal effort. The consistent quality of each patch ensures reliable performance across multiple cleaning sessions.

The only minor drawback is that the square shape can sometimes snag slightly when pulling through the bore. A slightly rounded corner might improve this. Overall, the patches meet and exceed expectations for bore cleaning, delivering consistent results.

Design & Ergonomics

The simple design of the Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 is effective. The material feels soft yet durable, and the size is perfect for the specified calibers. They are lightweight and easy to handle, even with solvent-soaked fingers.

There is virtually no learning curve associated with using these patches. Anyone familiar with firearm cleaning can immediately incorporate them into their routine. Their consistent quality makes them a user-friendly choice.

Durability & Maintenance

The Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 are designed for single-use applications. Their lifespan is limited to a single cleaning pass, but their high quantity ensures a long-lasting supply. These patches require no maintenance or repair.

Accessories and Customization Options

The Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50 do not come with accessories, nor are there direct customization options. However, their effectiveness is enhanced when paired with quality bore solvents, jags, and bore guides. They are compatible with virtually all standard cleaning rods and accessories designed for the specified calibers.

Pros and Cons of Cotton Flannel Patches 7mm-.38/6mm Benchrest 1.75 Inch Square 50