Kleen-Bore Cylinder Brush 38/357 Handgun Review

The Kleen-Bore Cylinder Brush 38/357 Handgun Made a Bold First Impression

After a decade immersed in the world of firearms, I’ve learned that consistent maintenance is the unsung hero of reliable performance. Revolvers, with their robust simplicity, are no exception, and keeping their cylinders clean is critical. My journey with the Kleen-Bore Cylinder Brush 38/357 Handgun began as a quest for a more efficient and effective method to tackle stubborn carbon buildup in my .357 Magnum.

I had been using a combination of solvent-soaked patches and nylon brushes, a process that felt tedious and often left lingering residue. The promise of stainless steel bristles designed specifically for cylinder chambers intrigued me. Upon receiving the Kleen-Bore Cylinder Brush 38/357 Handgun, my initial impression was positive. It felt sturdy, well-constructed, and purpose-built.

Compared to generic brushes I’d used in the past, the Kleen-Bore model seemed more robust. Its design was also more focused. I’d considered using a bore brush, but the Kleen-Bore’s shorter length and specific bristle configuration seemed better suited for the job. This dedicated design and the promise of aggressive carbon removal were the deciding factors.

Initially, I was cautiously optimistic. The stainless steel bristles gave me confidence that it would be more effective than my existing tools. I hoped it would significantly reduce the time and effort required to maintain my revolvers. This Kleen-Bore Cylinder Brush 38/357 Handgun showed promise and I was eager to put it to the test.

Real-World Testing: Putting Kleen-Bore Cylinder Brush 38/357 Handgun to the Test

First Use Experience

I first tested the Kleen-Bore Cylinder Brush 38/357 Handgun after a range session with my Smith & Wesson Model 686. This revolver had seen about 200 rounds of .357 Magnum ammunition. I typically clean my firearms indoors in my workshop.

The brush performed admirably, quickly loosening carbon deposits in the cylinder chambers. I found the stainless steel bristles to be effective without being overly abrasive. It took considerably less time and effort than using patches alone.

There were no immediate issues, but I did notice that some solvent splattered out of the cylinder during the brushing process. I quickly learned to use the brush with a slower, more deliberate motion. The Kleen-Bore Cylinder Brush 38/357 Handgun proved effective straight out of the package.

Extended Use & Reliability

After several months of use, the Kleen-Bore Cylinder Brush 38/357 Handgun has proven to be a reliable tool. The bristles have maintained their shape and stiffness. It shows no significant signs of wear and tear.

I clean my revolvers after every range session, typically once or twice a month. Maintenance involves simply rinsing the brush with solvent and wiping it dry. The Kleen-Bore Cylinder Brush 38/357 Handgun is far easier to clean than nylon brushes that tend to trap carbon and solvent.

Compared to my previous cleaning methods, the Kleen-Bore Cylinder Brush 38/357 Handgun is a clear improvement. The increased cleaning efficiency and reduced effort make firearm maintenance a more pleasant task. It consistently outperforms my old methods.

Breaking Down the Features of Kleen-Bore Cylinder Brush 38/357 Handgun

Specifications

• Caliber Compatibility: Designed specifically for .38 Special and .357 Magnum revolvers. This ensures a proper fit within the cylinder chambers.
• Bristle Material: Constructed with durable stainless steel bristles. Stainless steel is known for its resistance to corrosion and effective cleaning properties.
• Handle Material: Likely made of a polymer or similar durable material for a secure grip. This enhances control and comfort during use.
• Overall Length: Compact design intended for ease of use within the confines of a revolver cylinder. This compact design makes it very portable.
• Quantity: Each package includes one brush. This is a standard offering for this type of cleaning tool.

These specifications contribute directly to the brush’s effectiveness. The stainless steel bristles aggressively remove carbon fouling. The appropriate sizing ensures thorough cleaning of .38 Special and .357 Magnum cylinder chambers.

Performance & Functionality

The Kleen-Bore Cylinder Brush 38/357 Handgun excels at its primary task: removing stubborn carbon buildup from revolver cylinders. It significantly reduces cleaning time and effort compared to using patches alone. The brush is easy to maneuver within the cylinder chambers.

Its strength lies in its aggressive cleaning action. However, excessive pressure could potentially scratch the cylinder walls. The Kleen-Bore Cylinder Brush 38/357 Handgun exceeded my expectations for a simple cleaning tool.

Design & Ergonomics

The brush features a simple, functional design. It’s lightweight and easy to grip, even with solvent-covered hands. The handle is comfortable to hold and provides adequate leverage.

There is virtually no learning curve involved. Anyone familiar with basic firearm cleaning will find it intuitive to use. The Kleen-Bore Cylinder Brush 38/357 Handgun has a simple and effective design.

Durability & Maintenance

The stainless steel bristles are highly durable. They resist bending or breaking under normal use. The brush appears to be built to last for many years with proper care.

Maintenance is minimal. Simply rinse the brush with solvent after each use. Dry it thoroughly to prevent corrosion. The Kleen-Bore Cylinder Brush 38/357 Handgun is designed for easy upkeep.

Accessories and Customization Options

The Kleen-Bore Cylinder Brush 38/357 Handgun is a standalone tool. It does not require any additional accessories for its intended purpose. Customization options are not applicable for this type of product.

It is compatible with any standard firearm cleaning solvent. There is no need for proprietary cleaning solutions. This makes the Kleen-Bore Cylinder Brush 38/357 Handgun very versatile.

Pros and Cons of Kleen-Bore Cylinder Brush 38/357 Handgun

Check Best Price HERE

Who Should Buy Kleen-Bore Cylinder Brush 38/357 Handgun?

The Kleen-Bore Cylinder Brush 38/357 Handgun is perfect for revolver owners who prioritize thorough firearm maintenance. It’s an excellent tool for anyone who shoots .38 Special or .357 Magnum frequently. It will benefit anyone who wants to streamline their cleaning process.

This product may not be necessary for those who rarely shoot their revolvers. It is also unnecessary for those who are content with basic cleaning methods. A good solvent and patches may suffice for infrequent use.

A quality firearm cleaning solvent is a must-have accessory. Eye protection is also highly recommended to prevent solvent from splashing into the eyes. These items are essential for safe and effective cleaning.

Conclusion on Kleen-Bore Cylinder Brush 38/357 Handgun

The Kleen-Bore Cylinder Brush 38/357 Handgun is a simple yet highly effective tool. It greatly improves the efficiency and effectiveness of revolver cylinder cleaning. The stainless steel bristles provide aggressive cleaning action without sacrificing durability.

At a price of $3.49, the brush offers exceptional value. It is a worthwhile investment for any serious revolver shooter. The minimal price is well justified given the performance.

I wholeheartedly recommend the Kleen-Bore Cylinder Brush 38/357 Handgun to anyone seeking a better way to clean their revolver cylinders. Add this affordable and effective tool to your cleaning kit. You will not be disappointed.

Check Best Price HERE