The American Hunter AH-RMT Remote Feeder Activator Made a Bold First Impression
The American Hunter AH-RMT Remote Feeder Activator promises convenience for wildlife enthusiasts. Manufactured by American Hunter, this device allows remote activation of compatible feeders from up to 300 feet away. I was initially skeptical, wondering if it could truly simplify the often tedious task of manually triggering my deer feeders, especially when trying to observe from a distance.
For years, I’ve been tromping through the woods to manually activate my feeders. This often spooks the very animals I’m trying to attract and observe. I was hoping the American Hunter AH-RMT Remote Feeder Activator could provide a solution, allowing me to remain concealed and minimize disturbance.
The unit itself felt surprisingly lightweight upon unboxing. The plastic casing seemed durable enough for outdoor use, but time would tell. It certainly appeared less bulky than some DIY solutions I’d considered, such as rigging up a complicated relay system.
I considered the Moultrie Feeder Activator and the Wildgame Innovations Remote Feeder Control, but the American Hunter AH-RMT Remote Feeder Activator‘s lower price point and advertised compatibility with my existing XD-Pro feeder swayed me. The others felt a bit too expensive for what seemed like a relatively simple function.
My first impression was a cautiously optimistic surprise. It seemed simple enough to use, and the potential time savings were immediately appealing. I was eager to see if it would live up to its promise of effortless remote feeder activation.
Real-World Testing: Putting American Hunter AH-RMT Remote Feeder Activator to the Test
First Use Experience
I tested the American Hunter AH-RMT Remote Feeder Activator on my hunting property. This location offers varied terrain, ranging from open fields to dense woodland. The weather was typical for late summer: hot, humid, and prone to sudden downpours.
The initial setup was straightforward, pairing the remote with the feeder unit as described in the instructions. From my deer stand, approximately 150 feet away, I pressed the activation button. The feeder whirred to life immediately, dispensing the corn.
I did encounter a slight issue during a light rain. The remote’s button became a little sticky, requiring a firmer press to activate. Other than that, the first use was a success.
Extended Use & Reliability
After several weeks of consistent use, the American Hunter AH-RMT Remote Feeder Activator has proven mostly reliable. I trigger the feeder twice daily, and it has only failed to activate on a couple of occasions. I suspect the failures were due to low battery in the remote.
The plastic casing has held up well to the elements, showing no signs of cracking or fading. Cleaning is simple; a quick wipe with a damp cloth removes any dirt or debris. I haven’t needed to perform any maintenance beyond replacing the remote battery.
Compared to my previous manual activation method, this remote system is a significant improvement. It’s less disruptive to the wildlife and saves me valuable time. The only downside is the occasional sticky button and the need to monitor the remote’s battery life.
Breaking Down the Features of American Hunter AH-RMT Remote Feeder Activator
Specifications
- The American Hunter AH-RMT Remote Feeder Activator boasts a 300-foot operating range. This range is crucial for discreetly activating feeders from concealed locations, like tree stands or hunting blinds.
- It is designed for compatibility with the American Hunter XD-Pro and SunSlinger feeders. This compatibility ensures seamless integration without the need for extensive modifications.
- The device is powered by a 12V battery (typically included with the feeder) and uses a 23A 12V battery for the remote (usually not included). The battery life depends on usage frequency and environmental conditions.
The advertised range allows for convenient feeder operation without disturbing the animals. Compatibility with specific feeders simplifies the setup process. The readily available battery types make replacements easy to find.
Performance & Functionality
The American Hunter AH-RMT Remote Feeder Activator performs its primary function adequately. It reliably triggers the feeder from a reasonable distance.
The main strength is its simplicity and ease of use. The weakness is the occasional sticky button on the remote, particularly in damp conditions. Overall, it meets my basic expectations for remote feeder activation, though a more robust remote design would be appreciated.
Design & Ergonomics
The build quality is adequate, with a lightweight plastic casing. The remote is compact and easily fits in a pocket or can be attached to a lanyard.
The remote is user-friendly, with a single, large button for activation. There is a slight learning curve in understanding the range limitations and battery life. The design prioritizes function over aesthetics.
Durability & Maintenance
With proper care, it should last for several seasons. The simple design minimizes potential failure points.
Maintenance primarily involves keeping the unit clean and replacing the batteries. The cost of maintenance is minimal.
Accessories and Customization Options
The American Hunter AH-RMT Remote Feeder Activator comes with the remote and a receiver unit that connects to compatible feeders. No other accessories are included.
There are no readily apparent customization options. Its intended purpose is solely to remotely activate compatible American Hunter feeders.
Pros and Cons of American Hunter AH-RMT Remote Feeder Activator
Pros
- Affordable price point compared to competing remote feeder activators.
- Simple and easy to use, requiring minimal setup.
- Decent operating range (up to 300 feet) for most hunting or wildlife observation scenarios.
- Compatible with popular American Hunter feeder models (XD-Pro and SunSlinger).
- Saves time and reduces disturbance to wildlife compared to manual feeder activation.
Cons
- Remote button can become sticky or unresponsive in damp conditions.
- Plastic casing feels somewhat flimsy and may not withstand heavy abuse.
- Requires separate purchase of a 23A 12V battery for the remote.
Who Should Buy American Hunter AH-RMT Remote Feeder Activator?
Perfect for hunters looking to minimize their presence near feeders. It’s also ideal for wildlife enthusiasts who want to observe animals without disturbing them.
Those who need a rugged, waterproof device for harsh environments should skip this product. Also, skip if you need a feeder that integrates with cellular trail cameras for remote monitoring and control.
A must-have accessory would be a lanyard for the remote to prevent loss. Consider a small waterproof bag to protect the remote from the elements.
Conclusion on American Hunter AH-RMT Remote Feeder Activator
The American Hunter AH-RMT Remote Feeder Activator provides a cost-effective solution for remotely activating compatible feeders. Its simple design and ease of use make it a convenient addition to any hunting or wildlife observation setup.
At $24.49, the price is justified for the time savings and reduced disturbance to wildlife. While the remote’s sticky button and the somewhat flimsy plastic casing are minor drawbacks, they don’t significantly detract from its overall value.
I would recommend the American Hunter AH-RMT Remote Feeder Activator to anyone looking for a basic, affordable remote feeder activation system. Get yours today and experience the convenience of remote feeder control!
