The Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide Made a Bold First Impression
The Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide choke tube. It promises enhanced performance and durability. Coming from Browning, a name synonymous with quality firearms, I was eager to see if this choke lived up to the hype. My interest stemmed from a frustrating experience with inconsistent patterns while duck hunting last season. I needed a choke tube that could reliably deliver tight, even patterns at longer ranges, especially with steel shot.
Unboxing the choke, the first thing that struck me was its sleek black oxide finish. It looked and felt substantial, hinting at the quality stainless steel underneath. The weight felt reassuring, neither too heavy nor too light. This suggested a well-machined piece designed for consistent performance.
I considered a few other extended choke tubes from Carlson’s and Patternmaster. I chose the Browning Invector-Plus Midas due to Browning’s reputation and the promise of compatibility with my Browning shotgun. I was excited to see if it could finally give me the confidence I needed for those long-range shots.
Real-World Testing: Putting Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide to the Test
First Use Experience
My initial test took place at my local shooting range, patterning the Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide at 30 and 40 yards. I used a variety of 12-gauge loads, including both lead and steel shot. The weather was fairly typical for early spring: slightly overcast with a light breeze.
Installation was a breeze, threading smoothly into my Browning shotgun. The choke tightened down securely without any binding. The clearly marked constriction engraving was also a welcome feature, allowing for quick identification in the field.
The first few shots revealed a noticeably tighter pattern compared to the factory modified choke I had been using. The steel shot patterns, in particular, were much more consistent, with fewer stray pellets. I experienced no issues with recoil or muzzle rise during the initial session.
Extended Use & Reliability
After several weeks of use, including a few dove hunts and another trip to the range, the Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide has held up exceptionally well. There are no signs of wear or corrosion, even after being exposed to wet conditions. Cleaning is simple. A quick scrub with a bore brush and some solvent keeps it in top condition.
Compared to cheaper aftermarket chokes I’ve used in the past, the Browning stands out in terms of consistent performance and durability. I haven’t experienced any loosening or changes in pattern density over time. This choke has exceeded my expectations, providing the reliability and performance I need in the field.
Breaking Down the Features of Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide
Specifications
The Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide boasts several key specifications. It is designed for 12-gauge shotguns with the Browning Invector-Plus choke system. The choke is constructed from high-quality stainless steel for corrosion resistance. The black oxide finish provides added protection and a sleek aesthetic.
This particular model features a Full constriction, designed for tight patterns at longer ranges. It is a single choke tube and uses the Invector Plus configuration. These specs translate to improved pattern density and longer-range effectiveness. The stainless steel construction ensures longevity, even with heavy use.
Performance & Functionality
The Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide performs admirably, delivering consistently tight patterns. It provides a noticeable improvement in pattern density compared to more open chokes. The Full constriction is ideal for waterfowl hunting or any situation where longer shots are required. The black oxide finish prevents rust.
Its main strength is its consistent, reliable performance. There are no notable weaknesses. It meets and exceeds my expectations for a full choke tube.
Design & Ergonomics
The Browning Invector-Plus Midas features a simple, functional design. It’s made from stainless steel with a black oxide finish. This provides a non-reflective surface and robust durability. The choke is easy to install and remove. The external markings clearly indicate the constriction.
There’s no learning curve. It’s a simple, well-designed choke that does its job effectively.
Durability & Maintenance
The stainless steel construction ensures excellent durability, even in harsh conditions. The black oxide finish adds an extra layer of protection against corrosion. Maintenance is straightforward, requiring only occasional cleaning. With proper care, this choke tube should last for many years.
Accessories and Customization Options
The Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide comes as a standalone choke tube. No specific accessories are included. However, it is compatible with any Browning shotgun that uses the Invector-Plus choke system. This allows for easy interchangeability with other chokes. Many Browning choke cases can accommodate it.
Pros and Cons of Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide
Pros
- The stainless steel construction ensures excellent durability and corrosion resistance.
- The black oxide finish provides added protection and a non-reflective surface.
- The Full constriction delivers tight, consistent patterns at longer ranges.
- The choke is easy to install and remove.
- The clearly marked constriction allows for quick identification.
Cons
- The Full constriction may not be suitable for close-range shooting.
- It only includes one choke tube for the price.
Who Should Buy Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide?
The Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide is perfect for waterfowl hunters. It is also ideal for sporting clay shooters who require tight patterns. Anyone looking for improved range and accuracy with their Browning Invector-Plus shotgun would benefit from this choke.
Those who primarily hunt in close-range environments should skip this product. It is best for longer shots. A choke tube wrench is a must-have accessory for easy installation and removal.
Conclusion on Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide
The Browning Invector-Plus Midas 12 Gauge Full Stainless Steel Black Oxide is a well-made, durable, and reliable choke tube. It delivers consistently tight patterns. The price is justified by the quality of materials and performance.
I would highly recommend this choke to anyone looking to improve their range and accuracy with a Browning Invector-Plus shotgun. Upgrade your shooting experience today!