Limbsaver Grind To Fit Large Recoil Pad Review

The Limbsaver Grind To Fit Large Recoil Pad Made a Bold First Impression

As a seasoned outdoorsman and tactical gear aficionado with over a decade of experience, I’ve learned that comfort and control are paramount, especially when it comes to firearms. Recoil can be a serious issue, impacting accuracy, follow-up shots, and overall shooting enjoyment. This led me to seek a solution, and the Limbsaver Grind To Fit Large Recoil Pad immediately stood out as a promising contender, especially given my past positive experiences with Limbsaver products.

The Limbsaver Grind To Fit Large Recoil Pad promises to reduce felt recoil by up to 70% – a claim that piqued my interest, considering the punishing kick of my favorite 12-gauge shotgun. Upon unboxing, I was immediately impressed by the solid, quality feel of the pad. The matte black finish is clean and functional, and the NAVCOM (Noise and Vibration Control Material) Technology feels dense and resilient to the touch.

I had been considering the Pachmayr Decelerator and Kick-Eez recoil pads as well, but the Limbsaver‘s reputation for superior recoil absorption and the “grind to fit” design, allowing customization to my specific stock, ultimately swayed my decision. My initial thought was, “This could be a game-changer,” a hope tempered with the knowledge that proper fitting would be crucial to realizing its full potential. The overall design looked promising, appearing more sophisticated than basic slip-on pads, suggesting a serious investment in comfort.

Real-World Testing: Putting Limbsaver Grind To Fit Large Recoil Pad to the Test

First Use Experience

My first outing with the Limbsaver Grind To Fit Large Recoil Pad was at my local shooting range, where I primarily target practice with my 12-gauge. I tested it with a variety of loads, from light target rounds to heavier game loads, to get a feel for its effectiveness across different recoil levels. Installation required careful grinding and shaping, but once fitted, the pad immediately felt secure and comfortable against my shoulder.

Even in relatively mild conditions (sunny, 60 degrees), the non-slip surface of the Limbsaver Grind To Fit Large Recoil Pad provided excellent grip. The most immediate difference was the noticeable reduction in felt recoil, even with the heavier loads. Follow-up shots felt faster and more controlled, and I experienced significantly less shoulder fatigue compared to using the factory stock. There were no unexpected issues; the pad performed precisely as advertised.

Extended Use & Reliability

After several months of consistent use, including both range sessions and a dove hunting trip, the Limbsaver Grind To Fit Large Recoil Pad has held up remarkably well. There are no visible signs of wear and tear, and the NAVCOM Technology appears to maintain its recoil-absorbing properties. Cleaning is simple; a quick wipe down with a damp cloth is all that’s needed to remove dirt and grime.

Compared to my previous experiences with other recoil pads (mostly cheaper, slip-on varieties), the Limbsaver Grind To Fit Large Recoil Pad is in a different league entirely. Its custom fit, superior recoil absorption, and durable construction make it a worthwhile investment. It has significantly improved my shooting comfort and accuracy, particularly during extended shooting sessions. The recoil pad has allowed me to shoot longer and more comfortably.

Breaking Down the Features of Limbsaver Grind To Fit Large Recoil Pad

Specifications

• Reduced Felt Recoil by up to 70%: This is the key selling point, and based on my experience, it’s a realistic claim. The NAVCOM Technology effectively absorbs and dissipates recoil energy, minimizing its impact on the shooter.
• NAVCOM (Noise and Vibration Control Material) Technology: This proprietary material is the heart of the Limbsaver Grind To Fit Large Recoil Pad‘s recoil-reducing capabilities. It is designed to dampen vibrations and absorb shock, resulting in a more comfortable shooting experience.
• Non-Slip Surface: The textured surface provides a secure grip in all weather conditions, preventing slippage and ensuring consistent shoulder placement. This is critical for maintaining accuracy and control.
• 1″ Length of Pull: This adds approximately one inch to the length of pull, which can be beneficial for shooters with longer arms or those who prefer a longer stock. Remember to factor this into your fitting process.
• Matte Black Finish: The non-reflective finish blends seamlessly with most stocks and provides a professional, understated appearance. It doesn’t attract unwanted attention in the field.
• Anti-Muzzle Jump Technology: While difficult to quantify, the pad does seem to help reduce muzzle climb, likely due to improved shoulder contact and recoil absorption. This allows for faster target re-acquisition.
• Grind-to-Fit Design: This requires more effort during installation but enables a seamless and custom fit to a wide variety of stocks. This ensures maximum contact with the shoulder.

Performance & Functionality

The Limbsaver Grind To Fit Large Recoil Pad excels at its primary function: reducing felt recoil. This translates to increased shooting comfort, improved accuracy (especially on follow-up shots), and reduced shoulder fatigue. The non-slip surface and enhanced control further contribute to a positive shooting experience.

One minor drawback is the fitting process, which can be time-consuming and requires some skill. However, the custom fit achieved is well worth the effort. Overall, the Limbsaver Grind To Fit Large Recoil Pad meets and even exceeds expectations, delivering on its promises of recoil reduction and improved shooting performance.

Design & Ergonomics

The Limbsaver Grind To Fit Large Recoil Pad is made from high-quality NAVCOM Technology that feels both durable and comfortable. Its matte black finish is aesthetically pleasing and doesn’t add unnecessary weight to the firearm. The grind-to-fit design allows for a seamless integration with the stock, creating a custom fit that enhances ergonomics and improves shoulder contact.

There is a slight learning curve associated with the fitting process, but Limbsaver provides helpful instructions and online resources. The overall design is well thought out, prioritizing both functionality and aesthetics.

Durability & Maintenance

The Limbsaver Grind To Fit Large Recoil Pad is built to last, using high-quality materials that can withstand the rigors of regular use. The NAVCOM Technology is resistant to wear and tear, and the non-slip surface maintains its grip even after prolonged exposure to the elements. Maintenance is minimal; a simple wipe-down with a damp cloth is sufficient to keep the pad clean and in good condition. With proper care, the Limbsaver Grind To Fit Large Recoil Pad should provide years of reliable service.

Accessories and Customization Options

The Limbsaver Grind To Fit Large Recoil Pad itself doesn’t come with accessories, as it is primarily a replacement for the factory recoil pad. However, its custom fit design means it works well with many standard stock accessories. The pad can be further customized with different grinding and shaping techniques to achieve the perfect fit for your specific stock and shooting style.

Pros and Cons of Limbsaver Grind To Fit Large Recoil Pad

Check Best Price HERE

Who Should Buy Limbsaver Grind To Fit Large Recoil Pad?

The Limbsaver Grind To Fit Large Recoil Pad is perfect for:

• Hunters who frequently use shotguns or high-powered rifles.
• Competitive shooters who need to minimize recoil for faster follow-up shots.
• Recreational shooters who want to improve their shooting comfort and accuracy.
• Anyone who is sensitive to recoil or experiences shoulder fatigue.

Who should skip this product?

• Shooters who are uncomfortable with grinding and shaping firearm components.
• Individuals who already have a perfectly fitted recoil pad that adequately reduces recoil.
• Those who prefer slip-on recoil pads for their ease of installation.

A must-have modification is a quality sanding block and a Dremel tool for precise shaping during the fitting process.

Conclusion on Limbsaver Grind To Fit Large Recoil Pad

The Limbsaver Grind To Fit Large Recoil Pad is an excellent investment for anyone looking to reduce felt recoil and improve their shooting experience. While the fitting process requires some effort, the resulting custom fit and superior recoil absorption are well worth the time and expense. At $37.99, the price is justified by the pad’s performance, durability, and the significant improvement in shooting comfort and control it provides.

I would personally recommend the Limbsaver Grind To Fit Large Recoil Pad to anyone who shoots frequently or is sensitive to recoil. It’s a game-changer that will allow you to shoot longer, more accurately, and more comfortably. Upgrade your shooting experience today – your shoulder will thank you!

Check Best Price HERE