The Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black Made a Bold First Impression
As a seasoned outdoor and tactical gear specialist, I’ve encountered countless accessories promising enhanced firearm ergonomics. However, the Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black immediately piqued my interest with its promise of a tailored cheek weld for enhanced accuracy and comfort on popular rifle and shotgun platforms. Magpul is known for its quality, and this kit seemed like a simple yet effective solution to a common problem.
My issue was always consistent eye alignment with optics on my rifles equipped with Magpul Hunter stocks. Standard stock heights often resulted in straining to get a proper sight picture, leading to fatigue and reduced accuracy during extended range sessions. I needed a reliable and easily adjustable solution to raise my cheek weld and improve my shooting posture.
Upon receiving the kit, I was immediately impressed by the simple, rugged design and lightweight polymer construction. The two included risers, 0.50″ and 0.75″, offered a tangible means to fine-tune my cheek weld. It felt robust and well-made, definitely up to Magpul’s usual standards.
I considered other universal cheek risers that strap onto the stock, but those always felt flimsy and prone to shifting. Other cheek rest solutions are bulky and expensive. The Magpul kit, being specifically designed for their Hunter and SGA stocks, promised a seamless and secure fit. I was excited to install it and see if it lived up to the hype.
My first impression was overwhelmingly positive. The kit felt solid, well-designed, and offered a practical solution to a persistent problem. I was eager to get it on my rifle and head to the range.
Real-World Testing: Putting Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black to the Test
First Use Experience
I initially tested the Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black on my Ruger 10/22 equipped with a Magpul Hunter X-22 stock at my local outdoor shooting range. The weather was mild, with a slight breeze, providing optimal conditions for testing.
The installation was a breeze, literally snapping into place without any tools required. The 0.50″ riser proved to be the perfect height for my setup with a Nikon rimfire scope and DNZ medium height rings. My cheek weld was immediately improved, and I was able to acquire a clear and comfortable sight picture without any neck strain.
The only initial surprise was just how secure the risers felt once snapped into place. There was absolutely no wobble or movement. It felt like it was part of the original stock.
Extended Use & Reliability
After several months of consistent use across various range trips and a small game hunting excursion, the Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black has proven to be remarkably durable and reliable. There are no visible signs of wear and tear on either riser, even after exposure to dust, mud, and occasional bumps against trees during hunting.
Maintenance has been minimal. A simple wipe down with a damp cloth is all that’s needed to remove dirt and debris. It definitely outperforms the makeshift solutions I’ve used in the past, like taping foam padding to the stock.
Compared to other stock modifications, the Magpul cheek riser has been a game changer. It has held up extremely well and drastically improved my shooting comfort and consistency.
Breaking Down the Features of Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black
Specifications
The Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black is designed specifically for the Magpul Hunter X-22, Hunter X-22 Takedown, SGA Shotgun Stocks, Hunter 700, Hunter 700L, and Hunter American stocks. The kit includes two cheek risers, one 0.50″ high and one 0.75″ high, both molded from durable polymer and finished in black. The risers are made in the USA.
These specifications matter because they provide the user with options to precisely adjust the cheek weld to their preferred height. The polymer construction ensures durability without adding excessive weight to the firearm. The compatibility with several Magpul stocks makes this a versatile and valuable upgrade.
Performance & Functionality
The Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black performs its job exceptionally well by providing a consistent and comfortable cheek weld, which is critical for accuracy, especially when using optics. The ability to choose between two different heights allows for fine-tuning to accommodate various scope heights and shooting styles.
The main strength is its simplicity and effectiveness. The risers snap securely into place and provide a noticeable improvement in shooting comfort and accuracy. The only potential weakness is the lack of intermediate riser sizes; some users might find that neither the 0.50″ nor 0.75″ riser is perfect.
Overall, the kit meets and exceeds my expectations, providing a simple and effective solution for improving cheek weld on compatible Magpul stocks.
Design & Ergonomics
The build quality is excellent. The polymer feels robust and well-molded, and the black finish blends seamlessly with the Magpul stocks. The weight added by the risers is negligible.
The design is user-friendly with no learning curve. Snapping the risers into place is intuitive, and the enhanced cheek weld results in an immediately more comfortable and stable shooting platform.
Durability & Maintenance
The Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black is built to last. The durable polymer construction can withstand typical wear and tear encountered during shooting and hunting activities.
Maintenance is simple. A quick wipe down with a damp cloth is usually sufficient to keep the risers clean.
Accessories and Customization Options
The kit itself doesn’t come with additional accessories, but it enhances the functionality of compatible Magpul stocks. By improving cheek weld, it allows for better utilization of various optics, from low-profile red dots to high-magnification scopes.
The kit is compatible with any firearm accessory that fits a compatible Magpul stock, such as slings, bipods, and aftermarket triggers. This expands the possibilities for customizing and optimizing your rifle or shotgun.
Pros and Cons of Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black
Pros
- Provides a comfortable and consistent cheek weld for improved accuracy.
- Easy to install and remove without tools.
- Durable polymer construction ensures longevity.
- Compatible with a variety of popular Magpul stocks.
- Affordable price point offers excellent value.
Cons
- Only two height options (0.50″ and 0.75″) might not be ideal for all users.
- Limited to use with compatible Magpul stocks.
Who Should Buy Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black?
Perfect for: Hunters, recreational shooters, and anyone looking to improve their accuracy and comfort while using a rifle or shotgun equipped with a compatible Magpul stock. This is a must-have for those who find the standard stock height insufficient for proper eye alignment with their optics.
Who should skip this product? If you don’t own a compatible Magpul Hunter X-22, Hunter X-22 Takedown, SGA Shotgun Stock, Hunter 700, Hunter 700L, or Hunter American stock, this kit won’t work for you. Also, if you already have a perfectly adjusted cheek weld with your current setup, this might not be necessary.
Must-have accessories or modifications? This kit pairs perfectly with a quality optic and scope rings suited to your shooting needs. A sling is always a good addition for carrying your firearm comfortably.
Conclusion on Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black
The Magpul Hunter/SGA Cheek Riser Kit High 0.50″/0.75″ w/Cheek Weld Raise Black is a simple, effective, and affordable upgrade for anyone using a compatible Magpul stock. It significantly improves shooting comfort and accuracy by providing a consistent cheek weld, making it easier to acquire a clear sight picture with optics.
The price is more than justified by the enhanced performance and durability it provides. It’s a small investment that yields significant returns in terms of improved shooting experience.
I would absolutely recommend this kit to anyone looking to optimize their Magpul stock for better accuracy and comfort. If you’re struggling with eye alignment or simply want a more comfortable shooting experience, this is a no-brainer. Upgrade your rifle or shotgun today and experience the difference a proper cheek weld makes!