Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze Review

The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze Made a Bold First Impression

As a seasoned outdoor and tactical gear specialist, I’ve seen my fair share of scope mounts. The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze immediately caught my eye with its promise of a streamlined, one-piece design and that distinct Burnt Bronze finish. I was especially intrigued by the integrated 20 MOA, which hinted at enhanced long-range capabilities for my Browning X-Bolt rifle.

My aging scope mounts on my trusty X-Bolt needed an upgrade to better handle longer shots at coyotes on the plains. I was searching for a robust and lightweight solution that wouldn’t shift zero after repeated recoil. I also wanted something that looked good on my rifle.

Unboxing the Talley mounts revealed a product that felt incredibly solid. The CNC-machined aluminum was smooth and flawless, and the Burnt Bronze finish added a touch of class that my old, worn-out mounts lacked. These mounts felt noticeably lighter than the steel two-piece system they were replacing.

I considered options from Leupold and Warne, both reputable brands, but Talley’s one-piece design and integrated 20 MOA edge set them apart. The elimination of potential weak points in a traditional two-piece system was a major selling point. The lighter weight and sleek look also made Talley a clear winner.

I was genuinely excited, almost eager, to get these mounts installed and test their performance. The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze promise a blend of strength, accuracy, and aesthetics that instantly piqued my interest.

Real-World Testing: Putting Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze to the Test

First Use Experience

I tested the Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze at my local shooting range, zeroing my rifle with various loads. The weather was typical for early spring: a mix of sunshine and gusty winds. Installation was straightforward; they bolted directly to my X-Bolt action with perfect alignment.

The mounts held zero exceptionally well, even after repeated firing of magnum loads. I also performed a drop test (unloaded, of course) onto a padded surface, and the scope remained firmly in place. The integrated 20 MOA allowed me to easily dial in adjustments for targets out to 600 yards, a distance I previously struggled to reach with my old mounts.

No initial issues arose, and the “no lapping required” claim proved accurate, saving me time and effort. I was genuinely impressed with the Talley mounts’ out-of-the-box performance.

Extended Use & Reliability

After several months of use, including multiple hunting trips in varying conditions, the Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze continue to impress. The Burnt Bronze finish has proven to be remarkably durable, resisting scratches and fading even after being exposed to harsh elements. I have hunted in rain, snow, and extreme heat, and the Talley mounts have held up flawlessly.

There are no signs of wear and tear beyond some minor cosmetic scuffs. The mounts have remained securely attached to my rifle, and my scope has maintained its zero. I periodically check the mounting screws to ensure they are properly torqued, but they have never loosened.

Maintenance is simple, requiring only a quick wipe-down with a clean cloth after each use. Compared to my previous two-piece system, the Talley mounts are significantly more reliable and require less maintenance. These mounts have exceeded my expectations in terms of durability, reliability, and performance.

Breaking Down the Features of Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze

Specifications

The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze are meticulously crafted to provide a rock-solid mounting solution for your Browning X-Bolt rifle. The key features include:

• One-Piece Design: Fully CNC machined from lightweight aircraft-grade aluminum, this design eliminates the common issues of misalignment. Traditional two-piece systems can suffer from loose connections.
• 20 MOA Built-In: This feature provides an extra 20 Minutes Of Angle for long-range shooting. This allows for greater elevation adjustments in your scope.
• 1″ Ring Diameter: Specifically designed for scopes with a 1-inch tube diameter. Make sure your scope matches this measurement for a proper fit.
• Low Profile: The low-profile design keeps the scope close to the bore. This improves cheek weld and shooting comfort.
• Short/Super Short Action: These mounts are compatible with Browning X-Bolt rifles with short or super short actions. Verify your action length before purchasing.
• Burnt Bronze Finish: The durable Burnt Bronze finish provides a stylish and protective coating. It protects against the elements.
• Lightweight Aluminum: Constructed from high-grade, lightweight aircraft aluminum, minimizing added weight to the rifle. This reduces overall weight for easier carry.

These specifications are crucial for maximizing the accuracy and performance of your rifle. The one-piece design and integrated 20 MOA significantly enhance long-range shooting capabilities.

Performance & Functionality

The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze perform their job exceptionally well, providing a stable and reliable platform for my scope. Accuracy has improved noticeably, especially at longer ranges. The 20 MOA elevation provides ample adjustment for distant targets.

The strength of these mounts is their simplicity and robust construction. A minor weakness could be that the Burnt Bronze finish might not match every rifle/scope combination aesthetically for some users. Overall, these mounts exceed my expectations in terms of performance and functionality.

Design & Ergonomics

The build quality of the Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze is outstanding. The materials used are top-notch, and the CNC machining is precise. The low-profile design contributes to a comfortable shooting experience.

The mounts are incredibly user-friendly. Installation is quick and easy, and there’s no need for lapping. The streamlined design eliminates potential points of failure and ensures a secure fit.

Durability & Maintenance

The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze are built to last. The high-quality aluminum and durable finish ensure long-term reliability. Minimal maintenance is required.

Cleaning is a breeze, and the mounts are resistant to corrosion and wear. These mounts should provide years of dependable service.

Accessories and Customization Options

The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze do not come with any additional accessories. However, they are compatible with a wide range of 1-inch scopes. No further customization is necessary.

They will accommodate any scope with a 1″ tube, as long as the objective lens clears the barrel. These mounts are designed for simplicity and ease of use.

Pros and Cons of Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze

Check Best Price HERE

Who Should Buy Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze?

These Talley scope mounts are perfect for hunters and competitive shooters who demand a reliable and accurate mounting solution for their Browning X-Bolt rifles. They are especially beneficial for those who frequently engage targets at long ranges. This mount is ideal for anyone looking to upgrade from a traditional two-piece system.

Those who prioritize extensive customization options or require a different ring diameter should skip this product. Someone who prefers a steel mount for maximum weight and durability might also consider alternatives. A user who insists on lapping their rings should also avoid this product.

A must-have accessory to go along with this product would be a high-quality scope with good glass and repeatable adjustments. A torque wrench is also a great tool to ensure proper and even screw pressure.

Conclusion on Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze

The Talley Browning X-Bolt Scope Mounts 1″ Low 20 MOA Short/Super Short Burnt Bronze offer exceptional value for the price. The integrated design, lightweight construction, and built-in 20 MOA elevation make them a standout choice for Browning X-Bolt owners. The quality is impeccable.

The price is more than justified considering the performance and durability they provide. They simplify the mounting process and ensure a rock-solid platform for your scope. The Talley mounts are far from a disappointment.

I would highly recommend these mounts to anyone looking to enhance the accuracy and reliability of their Browning X-Bolt rifle. Upgrade your setup today and experience the difference that precision-engineered scope mounts can make!

Check Best Price HERE