The Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black Made a Bold First Impression
Red dot sights have become increasingly popular on pistols, offering faster target acquisition and improved accuracy. Finding the right mounting solution for a specific pistol and optic combination can often be a challenge. When I decided to upgrade my S&W M&P Shield EZ with a Trijicon RMRcc, I knew finding a reliable and low-profile mounting plate was crucial. That is why I decided to acquire and review the Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black.
My eyesight isn’t what it used to be, and the factory iron sights on my Shield EZ were becoming increasingly difficult to use effectively. I needed a red dot for quicker target acquisition and greater precision. Several mounting options exist, including direct milling of the slide, but I preferred a mounting plate for its flexibility and reversibility.
Upon receiving the Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black, I was immediately struck by its clean design and solid feel. The matte black finish seamlessly matched my Shield EZ. The plate felt substantial without adding unnecessary bulk. Compared to some universal plates I’ve used in the past, this one-piece design seemed inherently more robust and secure. I chose this Trijicon plate over cheaper alternatives because I value reliability and the Trijicon name carries significant weight in the optics world.
My initial reaction was definitely excitement. This mounting plate appeared to be precisely what I needed to seamlessly integrate a Trijicon RMRcc onto my S&W M&P Shield EZ. I was eager to install it and test its performance at the range.
Real-World Testing: Putting Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black to the Test
First Use Experience
My first opportunity to test the Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black was at my local outdoor shooting range. I mounted the plate and my RMRcc onto my Shield EZ in about 10 minutes using the supplied hardware. I ran approximately 200 rounds through the pistol, focusing on drills that required rapid target acquisition.
The mounting plate held up flawlessly during the initial range session. There were no signs of loosening or shifting of the optic. The low-profile design of the plate allowed for a natural and comfortable grip, with minimal impact on the pistol’s overall handling. I was initially concerned about potential interference with the slide’s operation, but the plate’s precise fit ensured smooth cycling throughout the session.
Extended Use & Reliability
After several months of consistent use, the Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black continues to perform admirably. I’ve put roughly 1,000 rounds through my Shield EZ with the plate installed. The mounting plate shows no signs of wear or fatigue.
The matte black finish has proven to be surprisingly durable, resisting scratches and maintaining its appearance even after repeated handling and cleaning. The mounting plate requires minimal maintenance, simply wiping it down with a gun cleaning solvent after each range session. It outperforms other mounting solutions I have used in the past by maintaining a secure and stable platform for my RMRcc, which directly translates to improved accuracy and confidence.
Breaking Down the Features of Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black
Specifications
The Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black is specifically designed for the S&W M&P Shield EZ pistol. It is also specifically designed for the Trijicon RMRcc optic. The plate features a one-piece construction. This enhances rigidity and simplifies installation. The finish is a matte black, which provides a non-reflective surface and complements the Shield EZ’s aesthetics.
This plate is crafted from high-quality steel, which ensures exceptional durability and resistance to recoil. The low-profile design keeps the optic close to the slide, minimizing the overall height and maintaining a comfortable sight picture. These specifications translate to a reliable and accurate red dot sight setup on the Shield EZ, as the plate provides a rock-solid mounting platform.
Performance & Functionality
The Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black excels at its primary function: securely mounting a Trijicon RMRcc optic to a S&W M&P Shield EZ pistol. The plate provides a stable and repeatable zero. This is crucial for maintaining accuracy. It avoids any shifting or loosening during firing.
Its greatest strength is its simplicity and reliability. The single-piece design eliminates potential failure points. A potential weakness might be its specific compatibility. It is only for the Shield EZ and RMRcc, limiting its use on other firearms or with other optics. It absolutely meets my expectations by providing a secure and low-profile RMRcc mounting solution.
Design & Ergonomics
The Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black features a minimalist design that integrates seamlessly with the Shield EZ’s aesthetics. The build quality is excellent, with precise machining and a flawless finish. The weight is negligible.
The plate adds very little bulk to the pistol. There is virtually no perceivable difference in handling compared to the stock configuration. Installation is straightforward, requiring only basic tools and no specialized gunsmithing skills.
Durability & Maintenance
Constructed from high-quality steel, the Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black is built to withstand the rigors of regular use. With proper care, this mounting plate should last for the lifetime of the pistol. Maintenance is minimal.
Regular cleaning with a gun cleaning solvent and occasional inspection for loose screws is all that’s required. Its robust construction ensures that it will reliably maintain zero and provide a stable mounting platform for the RMRcc optic.
Accessories and Customization Options
The Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black comes with all the necessary screws for mounting the plate to the Shield EZ and the RMRcc optic to the plate. There are no further customization options directly associated with the mounting plate itself. The plate is designed specifically for use with the Trijicon RMRcc.
Compatibility with other red dot sights is not guaranteed, and attempting to use it with incompatible optics could damage the plate or the firearm. The plate’s purpose is singular: to provide a secure and reliable mounting solution for the RMRcc on the Shield EZ.
Pros and Cons of Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black
Pros
- Rock-solid mounting platform for the Trijicon RMRcc, ensuring repeatable zero.
- Low-profile design minimizes added bulk and maintains comfortable handling.
- Durable steel construction for long-lasting performance.
- Easy installation with included hardware.
- Seamless integration with the S&W M&P Shield EZ aesthetics.
Cons
- Limited compatibility: Specifically designed for the Shield EZ and Trijicon RMRcc only.
- May require thread locker compound for added secureness.
Who Should Buy Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black?
The Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black is perfect for S&W M&P Shield EZ owners who want to add a Trijicon RMRcc red dot optic for faster target acquisition and improved accuracy. This is the ideal purchase for concealed carry holders who depend on their Shield EZ for personal defense. It is a must-have for anyone seeking a simple, robust, and reliable mounting solution.
Anyone who owns a different pistol model or intends to use a different red dot optic should skip this product. The plate’s specific design limits its compatibility to the Shield EZ and Trijicon RMRcc combination. A thread locker compound like Loctite is a must-have accessory for ensuring the screws remain secure over time.
Conclusion on Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black
The Trijicon RMRcc Mounting Plate S&W M&P Shield EZ 1-Piece Matte Black is an excellent product. It delivers exactly what it promises: a secure, low-profile, and reliable mounting solution for a Trijicon RMRcc optic on a S&W M&P Shield EZ pistol. The price of $59.49 is well justified. You are getting a high-quality product from a reputable manufacturer.
I would wholeheartedly recommend this mounting plate to any Shield EZ owner looking to upgrade their pistol with a red dot sight. If you want to improve your accuracy, increase your confidence, and get on target fast, this is the way to go. Upgrade your Shield EZ today and experience the difference!