The TRU TG8950G2 MNT SLD OPTIC For Glock RMR Made a Bold First Impression
The TRU TG8950G2 MNT SLD OPTIC For Glock RMR promises an affordable and straightforward solution for mounting a Trijicon RMR to your Glock. As someone who has spent countless hours tweaking and modifying firearms, I was eager to see if this sub-$40 mount could deliver on its promise. Could it provide a stable and reliable platform for one of the most popular pistol red dot sights on the market?
I’ve always been a fan of red dot sights on pistols. My aging eyes appreciate the ease of target acquisition compared to iron sights. The problem? Getting a reliable and low-profile mount for my Glock that wouldn’t break the bank. I’ve experimented with custom milled slides, which are excellent but expensive, and universal mounting plates, which often sit too high and feel clunky. The TRU TG8950G2 MNT SLD OPTIC For Glock RMR seemed to offer a middle ground – a dedicated mount for the RMR at an unbelievably low price.
Upon unboxing, the mount itself felt surprisingly solid for its price. It’s a simple piece of machined metal with a black finish. It didn’t have the slick, polished look of higher-end mounts, but it didn’t feel flimsy either. Compared to some of the polymer universal mounts I’ve used, this felt like a significant step up. I had previously used a Strike Industries RMR mount, which offered a more refined finish but was nearly three times the price. I also briefly considered a dovetail mount, but I preferred the more secure feeling of a direct slide mount.
My first impression was cautiously optimistic. I was excited by the potential value. I was also slightly concerned about long-term durability given the price point. Could the TRU TG8950G2 MNT SLD OPTIC For Glock RMR withstand the recoil of repeated firing and maintain a zero? Only real-world testing would tell.
Real-World Testing: Putting TRU TG8950G2 MNT SLD OPTIC For Glock RMR to the Test
First Use Experience
I tested the TRU TG8950G2 MNT SLD OPTIC For Glock RMR at my local outdoor shooting range. I mounted it on a Glock 19 Gen 4, a pistol I know intimately and trust implicitly. The installation process was straightforward, requiring only basic tools and a bit of patience to ensure proper alignment and torque.
The weather was typical for a summer day in the Midwest – hot and humid, with a slight breeze. I put about 200 rounds through the Glock 19 with the mounted RMR. I focused on drills that involved rapid target acquisition and transitions between multiple targets. Initially, the mount held firm, and the RMR maintained its zero. However, after about 150 rounds, I noticed a slight loosening of the mounting screws. I tightened them at the range, but this raised a concern about long-term reliability.
Extended Use & Reliability
After several weeks of use, including multiple range trips and dry-fire practice sessions, the TRU TG8950G2 MNT SLD OPTIC For Glock RMR showed some signs of wear. The black finish began to wear around the edges, particularly where the RMR made contact with the mount. The screws continued to loosen slightly after each range session. I had to re-tighten them before each use.
The mount itself hasn’t cracked or broken. It has maintained its overall structural integrity. The constant need to re-tighten the screws is a significant drawback. I experimented with applying a small amount of thread locker. This helped somewhat, but I still found myself checking the screws regularly. It’s certainly not a “set it and forget it” solution. While this mount is inexpensive, it requires consistent upkeep.
In comparison to a slide that was milled for an RMR, or a higher-end mount like a Scalarworks, the TRU TG8950G2 MNT SLD OPTIC For Glock RMR doesn’t offer the same level of rock-solid stability. It has performed adequately for recreational shooting and training. However, I wouldn’t trust it in a high-stakes, life-or-death scenario without serious modification and constant monitoring.
Breaking Down the Features of TRU TG8950G2 MNT SLD OPTIC For Glock RMR
Specifications
The TRU TG8950G2 MNT SLD OPTIC For Glock RMR is designed specifically for mounting Trijicon RMR pattern reflex sights onto Glock pistols. It’s a relatively lightweight mount made from machined metal. The mount is finished with a black coating. The provided screws are standard size for RMR mounting.
The mount is compatible with most Glock models. This makes it a versatile option. The low price point allows entry-level users to mount an RMR without significant cost.
Performance & Functionality
The primary function of the TRU TG8950G2 MNT SLD OPTIC For Glock RMR is to provide a stable platform for a red dot sight. It performs this function adequately, but not flawlessly. The mount does allow for accurate shooting once properly installed and zeroed.
The biggest weakness is the tendency for the mounting screws to loosen over time. This negatively impacts the user’s ability to confidently rely on the optic’s zero. A better screw design or the inclusion of thread locker would significantly improve its performance.
Design & Ergonomics
The TRU TG8950G2 MNT SLD OPTIC For Glock RMR features a simple, low-profile design. It doesn’t add excessive bulk to the pistol. The black finish blends reasonably well with most Glock slides.
The design is functional. It isn’t particularly aesthetically pleasing, but it gets the job done. The low-profile design helps maintain a reasonable sight picture with standard-height iron sights.
Durability & Maintenance
The mount’s durability is acceptable given its price point. The metal construction prevents cracking or breakage. The finish is prone to wear. The screws need frequent re-tightening, making maintenance a necessity.
Regular cleaning and inspection are recommended to ensure optimal performance. I would not expect this mount to last as long as a higher-end, more robustly constructed option. However, if properly maintained, it should provide a reasonable service life for recreational use.
Accessories and Customization Options
The TRU TG8950G2 MNT SLD OPTIC For Glock RMR doesn’t come with any accessories beyond the necessary mounting screws. The primary customization option is the choice of RMR-pattern optic. It is compatible with various RMR footprint optics from different manufacturers.
Due to the mounting screw issue, consider using aftermarket screws designed for RMR mounts with a higher quality thread pattern and material. A good set of thread locker can also improve the mount’s stability. A set of co-witness height iron sights can also be beneficial, as the mount doesn’t significantly obstruct the original sight picture.
Pros and Cons of TRU TG8950G2 MNT SLD OPTIC For Glock RMR
Pros
- Incredibly affordable price point.
- Simple, low-profile design.
- Compatible with most Glock models.
- Provides a functional mounting platform for RMR optics.
- Allows entry-level users to experience red dot sights on pistols without significant investment.
Cons
- Mounting screws tend to loosen over time.
- Finish is prone to wear.
- Requires frequent maintenance and inspection to ensure consistent performance.
Who Should Buy TRU TG8950G2 MNT SLD OPTIC For Glock RMR?
The TRU TG8950G2 MNT SLD OPTIC For Glock RMR is perfect for budget-conscious shooters. It’s also suitable for individuals who are new to pistol red dot sights. It allows them to experiment with an RMR on their Glock without committing to a more expensive solution. This product can also be helpful for those who have a dedicated range gun and do not require professional level reliability.
Those who should skip this product include law enforcement officers, competitive shooters, or anyone who relies on their firearm for self-defense. This is because those users demand absolute reliability. More rugged and secure mounting solutions are highly recommended in those instances.
Must-have accessories or modifications include a high-quality set of RMR mounting screws, thread locker, and potentially co-witness height iron sights.
Conclusion on TRU TG8950G2 MNT SLD OPTIC For Glock RMR
The TRU TG8950G2 MNT SLD OPTIC For Glock RMR is a budget-friendly option. It allows you to mount a Trijicon RMR to your Glock pistol. It is not without its flaws. The tendency for the mounting screws to loosen is a significant concern.
The value proposition is undeniable. For around $30, you can experience the benefits of a red dot sight on your pistol. The price point makes it an appealing entry point.
I would recommend this product with reservations. It’s a great option for recreational shooters on a tight budget. It’s a poor choice for those who require professional-grade reliability. If you’re willing to invest the time in proper installation, regular maintenance, and potentially upgrade the mounting screws, the TRU TG8950G2 MNT SLD OPTIC For Glock RMR can be a worthwhile purchase. Otherwise, save up for a higher-end solution.