The EGW Bomar Trijicon RMR Sight Mount Made a Bold First Impression
Red dot sights have revolutionized pistol shooting, and I’ve been eager to equip more of my handguns. However, milling slides can be expensive and irreversible. When I stumbled upon the EGW Bomar Trijicon RMR Sight Mount, it promised a simple, non-permanent solution for mounting a Trijicon RMR to pistols with a Bomar sight cut.
I was looking for a reliable, low-profile mount that wouldn’t break the bank. Many options exist, from full slide replacements to universal mounts. But the EGW product piqued my interest because of its direct replacement design. It replaces the existing Bomar rear sight, potentially offering a more stable and streamlined platform.
The package arrived in simple, no-frills packaging. The mount itself appeared well-machined from aluminum, and the black finish was even and consistent. My initial impression was positive; the mount felt solid and looked like it would be a straightforward installation. Compared to universal mounts that require drilling or adhesive, or full slide replacements that are considerably more expensive, this seemed like the perfect middle ground.
I was excited to see if the EGW Bomar Trijicon RMR Sight Mount lived up to its promise. Its simplicity and potential for a secure, low-profile red dot setup made it an intriguing option.
Real-World Testing: Putting EGW Bomar Trijicon RMR Sight Mount to the Test
First Use Experience
My first test of the EGW Bomar Trijicon RMR Sight Mount was at my local indoor shooting range. I installed it on my 1911 with a Bomar-cut rear sight. The installation was surprisingly simple. It slid right into place after drifting out the original Bomar sight.
After securing the mount with the included screws, I attached my Trijicon RMR. The red dot co-witnessed perfectly with my existing iron sights. Over the course of 200 rounds, the mount remained secure and didn’t shift or loosen. This was a great initial result.
Extended Use & Reliability
After several range trips and approximately 1000 rounds fired, the EGW Bomar Trijicon RMR Sight Mount continues to perform flawlessly. I’ve taken it through different weather conditions including rain and humidity. The mount remains stable and secure.
There are no signs of wear and tear. The aluminum construction seems durable and resistant to corrosion. The EGW mount requires minimal maintenance, just a quick wipe down after each range session.
Compared to other mounting solutions I’ve tried, this mount has greatly exceeded my expectations in terms of simplicity and reliability. It provides a rock-solid platform for my RMR without any permanent modifications to my firearm.
Breaking Down the Features of EGW Bomar Trijicon RMR Sight Mount
Specifications
The EGW Bomar Trijicon RMR Sight Mount is designed specifically for mounting a Trijicon RMR red dot sight to firearms with a Bomar-style rear sight cut. The mount is constructed from lightweight, yet durable, aluminum. It features a black finish for corrosion resistance and a tactical appearance.
It is a one-piece design, meaning it replaces the existing rear sight entirely. The mount is designed to offer a low-profile and secure platform for the RMR. This low profile helps with co-witnessing with standard height iron sights.
Performance & Functionality
The primary function of the EGW Bomar Trijicon RMR Sight Mount is to provide a stable and reliable platform for mounting a Trijicon RMR. In my experience, it performs this job exceptionally well. The mount is precise and fits securely into the Bomar sight cut, ensuring that the RMR remains firmly attached even under heavy recoil.
One of the strengths of this mount is its simplicity. The installation is straightforward and requires minimal gunsmithing skills. It offers a non-permanent solution for adding a red dot sight to a firearm. The only weakness I’ve found is it only fits firearms with a Bomar-style rear sight cut.
This mount has met and exceeded my expectations. It provides a solid and reliable red dot platform without the need for permanent modifications to the firearm.
Design & Ergonomics
The design of the EGW Bomar Trijicon RMR Sight Mount is simple and functional. The aluminum construction provides a balance between weight and durability. The black finish gives it a tactical look that blends well with most firearms.
The mount is designed to sit low and provide a clear sight picture. The mount does not interfere with the operation of the firearm. The installation process is user-friendly. Even someone with minimal gunsmithing experience can install this mount.
Durability & Maintenance
The aluminum construction and black finish contribute to the overall durability of the EGW Bomar Trijicon RMR Sight Mount. After extended use, I have seen no signs of wear or corrosion. The mount is easy to maintain.
A simple wipe down with a cloth after each range session is all that is required. I expect this mount to last for many years of reliable service.
Accessories and Customization Options
The EGW Bomar Trijicon RMR Sight Mount itself doesn’t come with any additional accessories. The primary customization option is the ability to mount a Trijicon RMR red dot sight. It provides the perfect platform for that particular optic.
The mount is designed to work with standard height iron sights, allowing for co-witnessing. It is not compatible with other red dot sight footprints without an adapter plate.
Pros and Cons of EGW Bomar Trijicon RMR Sight Mount
Pros
- Easy Installation: Simple, drop-in design requires minimal gunsmithing skills.
- Secure Mounting Platform: Provides a stable and reliable base for the Trijicon RMR.
- Low Profile: Maintains a low sight picture and allows for co-witnessing with standard height iron sights.
- Durable Construction: Made from lightweight and strong aluminum with a black finish.
- Cost-Effective: A much more affordable option compared to slide milling or complete slide replacements.
Cons
- Limited Compatibility: Only works with firearms that have a Bomar-style rear sight cut.
- RMR Specific: Designed specifically for the Trijicon RMR footprint, limiting optic choices without an adapter.
Who Should Buy EGW Bomar Trijicon RMR Sight Mount?
The EGW Bomar Trijicon RMR Sight Mount is perfect for shooters who own firearms with a Bomar-style rear sight cut and want to add a Trijicon RMR without permanent modifications. It is ideal for competitive shooters, recreational shooters, and those seeking a reliable and affordable red dot mounting solution.
This product is not suitable for individuals who do not own a firearm with a Bomar-style rear sight cut. Also, it’s not for those who prefer other red dot sight footprints besides the Trijicon RMR. A must-have accessory is a Trijicon RMR red dot sight to go with this mount.
Conclusion on EGW Bomar Trijicon RMR Sight Mount
The EGW Bomar Trijicon RMR Sight Mount is a well-designed and affordable solution for mounting a Trijicon RMR to firearms with a Bomar-style rear sight cut. It offers a simple, secure, and non-permanent way to upgrade your firearm with a red dot sight.
The price of $43.99 is justified by its ease of installation, durability, and performance. I would highly recommend the EGW mount to anyone looking for a cost-effective and reliable red dot mounting solution for their Bomar-equipped firearm. Upgrade your shooting experience today! Consider the EGW Bomar Trijicon RMR Sight Mount for a secure and reliable mounting solution.