The TruGlo Trijicon RMR Mossberg Red Dot Sight Mount Made a Bold First Impression
The TruGlo Trijicon RMR Mossberg Red Dot Sight Mount, offered by TruGlo, promises to bring the benefits of red dot optics to a wider range of Mossberg shotguns. This mount aims to provide a secure and stable platform for Trijicon RMR and similar footprint red dot sights, enhancing aiming speed and accuracy for shotgun users. For a price of $34.49, it seemed like a worthwhile upgrade for my Mossberg 500.
I’ve been running iron sights on my Mossberg for years, mainly for home defense and occasional clay shooting. I always felt like I could benefit from faster target acquisition, especially in low-light scenarios. The promise of easily adding a red dot sight without gunsmithing was incredibly appealing.
The TruGlo mount arrived in a simple blister pack. Upon removing it, my initial thought was that it felt surprisingly lightweight, though seemingly sturdy enough for the task. The black anodized finish appeared clean and even, suggesting good build quality.
I considered other options, including some higher-priced, machined aluminum mounts. Ultimately, the TruGlo mount’s affordability and the fact that I wasn’t planning on subjecting it to extreme conditions swayed my decision. I was cautiously optimistic.
First impressions were positive, a definite improvement over the factory setup. The mount appeared well-made, and I was eager to test how it performed in the field. I anticipated an increase in aiming speed and accuracy, but the proof would be in the shooting.
Real-World Testing: Putting TruGlo Trijicon RMR Mossberg Red Dot Sight Mount to the Test
First Use Experience
I first tested the TruGlo Trijicon RMR Mossberg Red Dot Sight Mount at my local outdoor shooting range. I used my Mossberg 500, equipped with a Trijicon RMR, firing various loads, including birdshot, buckshot, and slugs at different distances. The weather was sunny, with a slight breeze.
The mount held the RMR securely throughout the initial testing. I immediately noticed a significant improvement in target acquisition speed compared to the traditional bead sight. I easily acquired targets and made accurate shots.
Installation was straightforward; however, I did notice that the provided screws required careful tightening to avoid stripping. After about 50 rounds, I checked the mount’s screws and found they needed slight tightening. This underscored the importance of regularly checking and maintaining the mount.
Extended Use & Reliability
After several weeks and approximately 300 rounds, the TruGlo mount has held up reasonably well. I used the shotgun during several practice sessions, as well as a casual clay shooting event. The mount remained secure, but the screws still require occasional tightening after extended use.
There are no significant signs of wear and tear, other than minor surface scratches from handling. Cleaning is simple, requiring only a quick wipe-down with a gun cleaning cloth. The mount’s finish is resistant to most cleaning solvents.
My previous experiences with shotgun optics were limited to a high-end cantilever mount with a holographic sight on an AR-15 platform. The TruGlo mount, while simpler and less expensive, delivers acceptable performance for its intended purpose. It is definitely a worthwhile upgrade for the price.
Breaking Down the Features of TruGlo Trijicon RMR Mossberg Red Dot Sight Mount
Specifications
The TruGlo Trijicon RMR Mossberg Red Dot Sight Mount is specifically designed for mounting Trijicon RMR and similar footprint red dot sights onto Mossberg shotguns with receiver-mounted scope bases. It is constructed from lightweight yet durable materials. The mount is finished with a non-reflective matte black coating.
The mount allows for a low-profile mounting of the red dot sight, maintaining a good cheek weld and natural shooting posture. It is designed for easy installation with minimal gunsmithing required. The package includes all necessary mounting hardware.
These specifications are important because they enable users to quickly and reliably add a red dot optic to their shotgun, improving aiming speed and accuracy. The low-profile design ensures that the optic does not interfere with the user’s natural shooting stance. The ease of installation allows for immediate improvement without the added cost of professional gunsmithing.
Performance & Functionality
The TruGlo Trijicon RMR Mossberg Red Dot Sight Mount performs its primary function of securely attaching a red dot sight to a Mossberg shotgun effectively. It allows for faster target acquisition and improved accuracy, especially at close to medium ranges. It is reliable enough for recreational shooting and home defense scenarios.
One notable strength is its affordability, making it an accessible upgrade for a wide range of users. The straightforward installation process is also a plus. A potential weakness is the need to regularly check and tighten the mounting screws to maintain optimal performance.
For the price, the TruGlo mount meets my expectations. It enhances the functionality of my shotgun and provides a noticeable improvement in aiming speed and accuracy. It is a solid and budget-friendly upgrade.
Design & Ergonomics
The TruGlo mount features a simple and functional design. It is constructed from lightweight metal, which contributes to its ease of handling. It is comfortable and doesn’t add excessive weight to the shotgun.
The mount’s low-profile design ensures that the red dot sight is positioned close to the receiver, allowing for a comfortable cheek weld. This enhances the overall shooting experience. The installation process is generally user-friendly, with most users able to install it without professional assistance.
Durability & Maintenance
The TruGlo Trijicon RMR Mossberg Red Dot Sight Mount is reasonably durable for its price point. It is constructed from materials that can withstand normal use and handling. However, it may not be as durable as higher-end, machined aluminum mounts designed for extreme conditions.
Maintenance is simple. A regular check of the mounting screws and a quick wipe-down with a gun cleaning cloth are usually sufficient to keep it in good working condition. No specialized tools or cleaning agents are required.
Accessories and Customization Options
The TruGlo mount comes with all the necessary mounting screws for attaching it to the Mossberg shotgun’s receiver and for securing the Trijicon RMR or compatible red dot sight. It is compatible with any Trijicon RMR footprint red dot sight. The specific compatibility of the mount with other accessories is limited by its primary function of attaching a red dot optic.
While it doesn’t offer extensive customization options, the ability to choose from a wide range of RMR footprint red dot sights allows users to tailor their sighting system to their specific needs and preferences. This flexibility enhances the overall value and utility of the TruGlo mount.
Pros and Cons of TruGlo Trijicon RMR Mossberg Red Dot Sight Mount
Pros
- Affordable price makes it accessible to a wide range of users.
- Easy installation requires minimal gunsmithing, saving time and money.
- Low-profile design maintains a good cheek weld and natural shooting posture.
- Improved target acquisition speed enhances shooting performance, particularly in dynamic situations.
- Compatible with Trijicon RMR footprint red dot sights, providing flexibility in optic selection.
Cons
- Requires occasional tightening of mounting screws to maintain optimal performance.
- May not be as durable as higher-end, machined aluminum mounts in extreme conditions.
Who Should Buy TruGlo Trijicon RMR Mossberg Red Dot Sight Mount?
The TruGlo Trijicon RMR Mossberg Red Dot Sight Mount is perfect for recreational shooters and home defense enthusiasts looking to upgrade their Mossberg shotgun with a red dot optic. It’s also ideal for those seeking an affordable and easy-to-install solution. This mount would be a good fit for casual clay shooters, too.
This product might not be suitable for users who subject their firearms to extremely harsh conditions or require the highest level of durability. Competition shooters who demand the utmost reliability and precision may also prefer a higher-end mounting solution.
A must-have accessory would be a high-quality Trijicon RMR or compatible red dot sight. A torque wrench is also helpful to ensure proper tightening of the mounting screws, preventing over-tightening and potential damage.
Conclusion on TruGlo Trijicon RMR Mossberg Red Dot Sight Mount
The TruGlo Trijicon RMR Mossberg Red Dot Sight Mount is a solid and affordable option for adding a red dot optic to a Mossberg shotgun. It offers improved target acquisition speed and enhanced accuracy. It’s a worthy upgrade for recreational shooters and home defense enthusiasts.
At a price of $34.49, the TruGlo mount provides excellent value for the money. It delivers acceptable performance and functionality without breaking the bank. The price is definitely justified.
I would personally recommend the TruGlo Trijicon RMR Mossberg Red Dot Sight Mount to anyone seeking a budget-friendly and easy-to-install red dot mounting solution for their Mossberg shotgun. If you’re on a budget and want to improve your shotgun’s aiming capabilities, this is a great place to start. Upgrade your Mossberg today and experience the benefits of red dot optics!