The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 Made a Bold First Impression
As an outdoor and tactical gear specialist for over a decade, I’ve handled countless firearm accessories. However, the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 immediately caught my eye as a practical solution for a common problem: securely mounting popular red dot optics to the CZ Shadow 2 platform without expensive gunsmithing. My primary motivation for seeking out this product was the desire to add a red dot sight to my CZ Shadow 2, increasing its versatility for both competition and recreational shooting.
The mount arrived in simple, functional packaging, containing the mount itself and the necessary screws. My initial impression was that the aluminum was high quality, with a clean, matte black hardcoat finish. The low profile design also struck me as ideal for maintaining a comfortable cheek weld. I previously considered having my slide milled directly for an optic, but the EGW mount offered a less permanent, more cost-effective solution.
I compared this mount to offerings from Henning Group and CZ Custom. I chose the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 primarily because of EGW‘s reputation for precision machining and the mount’s direct compatibility with a wide range of popular red dot sights. I was definitely excited; this promised to be a significant upgrade to my CZ Shadow 2, potentially boosting its accuracy and ease of use.
Real-World Testing: Putting EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 to the Test
First Use Experience
My first outing with the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 was at my local outdoor shooting range. I mounted a Holosun 507C X2 to the EGW mount and installed the assembly on my CZ Shadow 2. The weather was slightly overcast, providing good contrast for the red dot against the target.
Installation was relatively straightforward, although the progressive taper of the dovetail required a bit of patience and a non-marring punch to drift it into place. Once secured, the mount felt rock solid, and the Holosun 507C X2 sat perfectly flush. I was immediately impressed by how low the optic sat, allowing me to maintain a natural cheek weld. There were no immediate issues, and I began sighting in the optic at 15 yards.
Extended Use & Reliability
After several range sessions spanning a few months, the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 has held up remarkably well. I’ve put several hundred rounds downrange with the mount installed. There are no signs of loosening or shifting. The finish remains intact, with no visible scratches or wear marks.
I’ve found the mount to be incredibly reliable; it maintains zero consistently, even after repeated disassembly and reassembly of the pistol for cleaning. Cleaning is simple, requiring only a quick wipe-down with a lightly oiled cloth. The EGW mount significantly outperforms my previous attempts to use less robust mounting solutions; before, I struggled with optics that would loosen and shift, leading to inconsistent accuracy.
Breaking Down the Features of EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2
Specifications
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 is constructed from 7075 Aluminum, a high-strength alloy known for its durability and lightweight properties. This ensures the mount can withstand the recoil and stresses of repeated firing without adding unnecessary weight to the firearm.
The mount features a Matte Black Hardcoat finish. This finish provides excellent corrosion resistance and helps to reduce glare, making it ideal for tactical applications and outdoor shooting conditions.
The overall length of the mount is 1.780 inches, and the overall width is 1.1 inches. These dimensions are carefully chosen to provide a secure and stable platform for the red dot sight while minimizing the impact on the overall size and weight of the pistol.
The mount includes (2) 6-32 Flat Head Screws and (1) 6-32 Set Screw for secure attachment. These screws are designed to properly torque down and prevent the mount from loosening during use.
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 is compatible with a wide range of red dot sights, including Trijicon RMR / SRO, Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2, Swampfox Kingslayer / Liberty / Justice. This versatility makes it an excellent choice for shooters who own multiple optics or may want to upgrade in the future.
Performance & Functionality
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 performs its job exceptionally well. Its primary function is to provide a secure and stable platform for mounting a red dot sight to the CZ Shadow 2, and it accomplishes this flawlessly. Accuracy is significantly improved due to the stable platform, allowing for faster target acquisition and more consistent shot placement.
The main strength of the EGW mount is its rock-solid stability and precise fit. The dovetail design and included set screw ensure that the mount stays firmly in place, even under heavy recoil. The only area for potential improvement would be clearer installation instructions for novice users. It meets and exceeds expectations, providing a significant upgrade to the CZ Shadow 2’s capabilities.
Design & Ergonomics
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 features a sleek, low-profile design that integrates seamlessly with the CZ Shadow 2. The 7075 Aluminum construction ensures a balance between durability and weight, while the Matte Black Hardcoat provides a non-reflective surface. The mount’s low height allows for a comfortable cheek weld, maintaining a natural shooting position.
The mount is generally user-friendly, although some gunsmithing experience or familiarity with dovetail installations is recommended. The progressive taper of the dovetail ensures a snug fit, but it may require some gentle persuasion to install correctly.
Durability & Maintenance
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 is built to last. The 7075 Aluminum and Matte Black Hardcoat finish provide excellent resistance to wear and corrosion. With proper care, the mount should provide years of reliable service.
Maintenance is simple. Regular cleaning with a lightly oiled cloth is sufficient to keep the mount in good condition. The durable finish resists scratches and dings, making it easy to maintain its appearance.
Accessories and Customization Options
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 does not come with any additional accessories beyond the mounting screws. However, its primary function is to provide a platform for mounting red dot sights, opening up a wide range of customization options. As stated above, it is compatible with Trijicon RMR / SRO, Holosun HE407C / HE407C X2 / HE507C / HE507C X2 / HS407C / HS407C X2 / HS507C / HS507C X2, Swampfox Kingslayer / Liberty / Justice. The mount is designed to be compatible with standard CZ Shadow 2 components, so no modifications to the pistol itself are required.
Pros and Cons of EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2
Pros
- Rock-Solid Stability: Provides a secure and unwavering platform for red dot sights, ensuring consistent zero.
- Wide Compatibility: Compatible with a vast range of popular red dot optics from Trijicon, Holosun, and Swampfox.
- Low Profile Design: Maintains a comfortable cheek weld and natural shooting position.
- Durable Construction: Made from high-strength 7075 Aluminum with a corrosion-resistant Matte Black Hardcoat.
- Cost-Effective: Offers a less expensive and less permanent alternative to slide milling.
Cons
- Installation may require some gunsmithing experience.
- No included installation instructions could pose a challenge for novice users.
Who Should Buy EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2?
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 is perfect for competitive shooters looking to enhance their speed and accuracy. It is also great for recreational shooters who want to add a red dot optic to their CZ Shadow 2 without permanent modifications. Finally, it suits anyone who appreciates a durable, reliable, and cost-effective mounting solution.
This product might not be ideal for individuals who are completely unfamiliar with firearm disassembly and reassembly, or those who prefer a gunsmith to handle all modifications. A must-have accessory would be a high-quality set of punches and a non-marring hammer to facilitate proper installation.
Conclusion on EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2
The EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 is a well-engineered and highly functional accessory. It provides a stable and secure platform for mounting popular red dot sights to the CZ Shadow 2, enhancing its accuracy and versatility. At a price of $43.99, the value proposition is excellent; it’s a small investment that yields a significant improvement in performance.
I would absolutely recommend the EGW Trijicon RMR / SRO, Holosun 407c / 507c Mount for CZ Shadow 2 to anyone looking to upgrade their CZ Shadow 2 with a red dot sight. It’s a durable, reliable, and cost-effective solution that will not disappoint. Upgrade your CZ Shadow 2 today and experience the benefits of a red dot sight without breaking the bank!