BURRIS MED 1″ .22 RINGS DLX STEEL BK Review

The BURRIS MED 1″ .22 RINGS DLX STEEL BK Made a Bold First Impression

Finding the perfect rings for a rimfire rifle can be a surprisingly tricky task. Many options exist, but few offer the right balance of quality, reliability, and aesthetics without breaking the bank. The BURRIS MED 1″ .22 RINGS DLX STEEL BK promised to be that solution, a set of steel rings designed specifically for .22 caliber rifles and sporting a classic, sleek look.

I needed rings to mount a scope on my vintage Marlin Model 60. The factory rings were… less than ideal. They slipped under recoil and looked utterly out of place on the rifle. I wanted something that would hold zero, provide a solid mount, and complement the rifle’s classic lines.

The packaging was simple but effective, and the rings themselves felt substantial in hand. My initial impression was positive; the Burris rings had a nice weight and a clean, gloss black finish. They looked well-made, and the steel construction inspired confidence.

I considered other options, including Weaver Tip-Off rings and some cheaper aluminum alternatives. Ultimately, I chose the BURRIS MED 1″ .22 RINGS DLX STEEL BK for a few reasons. I trust the Burris name and their reputation for quality optics and accessories. Also, steel rings offer superior strength and durability compared to aluminum, and the medium height seemed perfect for my scope and rifle combination. The others simply didn’t provide the reassurance of quality and reliability I was seeking.

My first impression was one of cautious optimism. The rings looked great, but the real test would be on the range. I was hoping for a noticeable improvement in accuracy and consistency, and I was eager to see how well they held up to repeated use.

Real-World Testing: Putting BURRIS MED 1″ .22 RINGS DLX STEEL BK to the Test

First Use Experience

I tested the BURRIS MED 1″ .22 RINGS DLX STEEL BK at my local outdoor shooting range. The weather was mild, with a slight breeze. I mounted the rings on my Marlin Model 60, installed a Burris Fullfield II 3-9×40 scope, and carefully torqued the screws to the recommended specifications.

The initial setup was straightforward, and the rings aligned perfectly with the scope. I was immediately impressed by how securely the scope sat in the rings. After sighting in, I fired about 100 rounds of .22LR ammunition.

The rings performed flawlessly. There was no slippage, and the scope remained firmly in place. The accuracy of my rifle improved significantly, and I was able to achieve tighter groupings than with my previous rings. There were no unexpected issues.

Extended Use & Reliability

After several months of regular use, the BURRIS MED 1″ .22 RINGS DLX STEEL BK continue to impress. They’ve held up beautifully, showing no signs of wear or loosening. The gloss black finish has proven to be quite durable, resisting scratches and maintaining its shine.

Maintenance is simple. I occasionally wipe them down with a lightly oiled cloth to prevent rust, but that’s about it. I’ve taken the rifle on several hunting trips in various weather conditions, including rain and snow. The rings have performed consistently in all environments.

Compared to my previous experiences with cheaper rimfire rings, the BURRIS MED 1″ .22 RINGS DLX STEEL BK are a revelation. They offer superior stability, durability, and overall performance. They have exceeded my expectations.

Breaking Down the Features of BURRIS MED 1″ .22 RINGS DLX STEEL BK

Specifications

• The BURRIS MED 1″ .22 RINGS DLX STEEL BK are designed for .22 caliber rifles. This means they are appropriately sized for the smaller dovetail rails commonly found on .22 rifles.

• These rings are designed to accommodate scopes with a 1-inch tube diameter. This is the most common size for rimfire scopes, ensuring wide compatibility.

• The “Medium” height designation indicates the distance between the base of the rings and the center of the scope tube. This is an important factor in scope clearance and cheek weld, and the medium height often provides a good balance for a wide range of rifles and scopes.

• Constructed from steel, the BURRIS MED 1″ .22 RINGS DLX STEEL BK are built for durability. Steel offers superior strength and resistance to wear compared to aluminum, ensuring a long lifespan.

• The gloss black finish provides a classic and attractive look. This finish also helps to protect the steel from corrosion.

Performance & Functionality

The BURRIS MED 1″ .22 RINGS DLX STEEL BK excel in their primary function: securely mounting a scope to a .22 rifle. The steel construction provides a rock-solid platform, minimizing vibration and ensuring consistent accuracy. The rings clamp tightly onto the dovetail rail and the scope tube, preventing slippage even under recoil.

The design is simple and effective. The rings are easy to install and adjust. The gloss black finish adds a touch of elegance to any rifle.

The rings meet and exceed expectations. They provide a level of stability and reliability that is unmatched by cheaper alternatives.

Design & Ergonomics

The BURRIS MED 1″ .22 RINGS DLX STEEL BK feature a classic, low-profile design. The gloss black finish complements a wide range of rifles and scopes. The rings are relatively lightweight, adding minimal bulk to the rifle.

The build quality is excellent. The steel is precisely machined and finished. The rings feel solid and well-made.

There is no learning curve. The rings are easy to install and adjust, even for beginners.

Durability & Maintenance

The steel construction of the BURRIS MED 1″ .22 RINGS DLX STEEL BK ensures a long lifespan. The rings are resistant to wear and tear, and the gloss black finish helps to protect against corrosion. With proper care, these rings should last for many years.

Maintenance is simple. The rings can be wiped down with a lightly oiled cloth to prevent rust. The screws should be checked periodically to ensure they are properly torqued.

Accessories and Customization Options

The BURRIS MED 1″ .22 RINGS DLX STEEL BK do not come with any additional accessories. However, they are compatible with a wide range of 1-inch scopes and .22 caliber rifles. There are no specific customization options for the rings themselves.

Pros and Cons of BURRIS MED 1″ .22 RINGS DLX STEEL BK

Check Best Price HERE

Who Should Buy BURRIS MED 1″ .22 RINGS DLX STEEL BK?

The BURRIS MED 1″ .22 RINGS DLX STEEL BK are perfect for shooters who want a reliable and durable set of rings for their .22 caliber rifle. They are ideal for target shooters, hunters, and anyone who wants to improve the accuracy and consistency of their rifle. They particularly benefit anyone who owns a classic .22 rifle and wants an aesthetically fitting and reliably functioning set of rings.

Those who prioritize ultra-lightweight gear above all else might consider aluminum alternatives. Shooters who need rings with specific features, such as quick-detach levers or Picatinny rail mounts, should explore other options.

A torque wrench is a must-have accessory for installing these rings. Over-tightening the screws can damage the scope or the rings themselves.

Conclusion on BURRIS MED 1″ .22 RINGS DLX STEEL BK

The BURRIS MED 1″ .22 RINGS DLX STEEL BK are an excellent choice for anyone looking for a reliable and durable set of rings for their .22 caliber rifle. They offer superior stability, accuracy, and longevity at an affordable price. The steel construction and classic design make them a worthwhile investment for any serious shooter.

The price is definitely justified. These rings offer exceptional value for the money. They outperform cheaper alternatives in every way.

I would personally recommend the BURRIS MED 1″ .22 RINGS DLX STEEL BK without hesitation. If you’re looking for a set of rings that will hold zero, provide a solid mount, and last for years, look no further. Upgrade your shooting experience today!

Check Best Price HERE