The Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height Made a Bold First Impression
The Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height promise a simple solution for mounting optics on firearms, offering extra height for larger objective lenses or overcoming potential interference issues. From Weaver, a name synonymous with reliable mounting solutions, these rings aim to provide secure and repeatable zeroing in a user-friendly package. My initial interest in these rings stemmed from a specific issue: I was attempting to mount a scope with a large objective bell on a lever-action rifle, but the standard height rings were causing the scope to interfere with the rear sight.
Upon receiving the Weaver X-High Detachable Top Mount Rings, my first impression was that they were surprisingly lightweight. The gloss black finish appeared well-applied and consistent across all surfaces. The detachable levers felt reasonably sturdy, but not exceptionally robust.
I’ve used similar rings from Leupold and Burris in the past. These Weaver rings felt less substantial compared to the Leupold QRW rings, which offer a more refined locking mechanism, but they also cost significantly less. I chose the Weaver X-High Detachable Top Mount Rings for this particular project due to their height, availability, and price point, hoping they would provide a functional solution without breaking the bank. While I wasn’t blown away, I also wasn’t immediately disappointed; they seemed like a reasonable option for the intended purpose.
Real-World Testing: Putting **Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height** to the Test
First Use Experience
My first testing ground for the Weaver X-High Detachable Top Mount Rings was at my local shooting range, specifically mounting them on my trusty .30-30 lever-action. I needed to zero the scope after installation. Setting up the rings was straightforward; the levers locked securely onto the Weaver bases I had previously installed.
The conditions were relatively mild, with a slight breeze and clear skies. I experienced no immediate issues with the rings loosening or shifting during the initial zeroing process. Adjusting the scope and achieving a satisfactory zero proved uneventful.
After the first few shots, I checked the screws and lever tension. Everything remained tight. I initially felt confident that these rings would serve their intended purpose.
<h3>Extended Use & Reliability</h3>After several range sessions spanning a few months, the performance of the Weaver X-High Detachable Top Mount Rings proved adequate but not exceptional. I noticed a slight shift in zero after detaching and reattaching the scope on a couple of occasions. This wasn’t a major shift, but enough to warrant a couple of clicks on the scope’s turrets to get back on target.
There were no significant signs of wear and tear on the finish or the locking mechanisms. Cleaning was simple. I just wiped them down with a lightly oiled cloth after each range visit.
Comparing them to my previous experiences with higher-end rings, the Weaver X-High Detachable Top Mount Rings didn’t quite match the rock-solid repeatability of something like a set of Warne Maxima QD rings. However, for the price, they performed acceptably for casual target shooting and hunting applications where extreme precision wasn’t paramount.
Breaking Down the Features of **Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height**
Specifications
The Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height are designed for use with Weaver-style bases. The “X-High” designation indicates that they provide additional clearance for scopes with larger objective lenses or for firearms with iron sights that need to be cleared. The ring height is an important factor to consider for proper cheek weld and comfortable shooting.
The rings are constructed from aluminum alloy, contributing to their lightweight design. The gloss black finish provides some corrosion resistance and a visually appealing look. The detachable levers allow for quick removal and reattachment of the scope.
<h3>Performance & Functionality</h3>The Weaver X-High Detachable Top Mount Rings performed their primary function adequately, securely holding the scope in place during normal shooting conditions. However, the slight zero shift upon detachment and reattachment was a notable drawback. The extra height provided ample clearance for my large objective scope and solved the initial interference problem.
Their strength lies in their simplicity and affordability. Improvement could be made by improving the locking mechanism and ensuring better repeatability after detachment. They meet expectations for a budget-friendly option, but they fall short of the performance offered by premium rings.
<h3>Design & Ergonomics</h3>The build quality is acceptable for the price point, but the materials and finish don’t feel as robust as higher-end alternatives. The lightweight design is a positive attribute, but it also contributes to the feeling of slightly reduced durability. The gloss black finish is aesthetically pleasing, but it may show scratches and wear more easily than a matte finish.
The rings are relatively user-friendly to install and operate. The detachable levers make quick scope changes possible. There’s no significant learning curve involved.
<h3>Durability & Maintenance</h3>While I haven’t experienced any catastrophic failures, the long-term durability remains a question mark. The aluminum alloy construction is susceptible to wear and tear, especially with frequent use and exposure to harsh conditions. Regular cleaning and lubrication of the levers are recommended to maintain smooth operation.
Maintenance is straightforward. A simple wipe-down with a cloth and occasional application of gun oil are usually sufficient. The design doesn’t lend itself to easy repair. If a lever were to break or a screw were to strip, replacement would likely be the only option.
<h3>Accessories and Customization Options</h3>The Weaver X-High Detachable Top Mount Rings don’t come with any included accessories beyond the rings themselves. They are designed specifically for use with Weaver-style bases. There are no inherent customization options.
They are compatible with any scope that has a 1-inch tube diameter, which is a standard size. Compatibility with other brands’ accessories is limited to the Weaver-style base interface.
Pros and Cons of **Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height**
Pros
- Affordable price point makes them accessible to budget-conscious shooters.
- Detachable levers allow for quick scope removal and reattachment.
- Extra height provides ample clearance for large objective scopes or iron sights.
- Simple and easy to install and use, requiring minimal technical knowledge.
- Lightweight design doesn’t add significant weight to the firearm.
Cons
- Slight zero shift upon detachment and reattachment affects precision.
- Build quality and materials feel less robust than premium alternatives.
- Long-term durability may be a concern, especially with heavy use.
Who Should Buy **Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height**?
The Weaver X-High Detachable Top Mount Rings are perfect for: casual shooters, hunters on a budget, and anyone needing extra scope height on a firearm with Weaver bases. They are also suitable for individuals who prioritize affordability and ease of use over ultimate precision and rock-solid repeatability. These rings are a good option for mounting scopes on rimfire rifles, lever-action rifles, or shotguns where high levels of recoil aren’t a factor.
Who should skip this product? Competitive shooters, precision rifle enthusiasts, and anyone who demands absolute zero retention after detaching and reattaching their scope should look at higher-end alternatives. These rings are not ideal for high-recoil firearms or situations where extreme durability is essential.
A must-have accessory would be a high-quality torque wrench to ensure proper screw tightening without over-tightening and stripping the threads. Additionally, a set of Weaver-compatible scope bases is necessary if the firearm doesn’t already have them.
Conclusion on **Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height**
The Weaver X-High Detachable Top Mount Rings w/Gloss Black Finis – Extra High Ring Height provide a functional and affordable solution for mounting scopes with extra height requirements. While they may not offer the same level of performance and durability as premium options, they represent a reasonable value proposition for budget-conscious shooters. The slight zero shift upon detachment is a notable drawback, but it may be acceptable for certain applications.
The price is definitely justified for what you get. They solve a specific problem (scope height) without breaking the bank.
I would cautiously recommend them to casual shooters and hunters on a budget who understand their limitations. If you’re looking for a simple, affordable way to mount a scope with extra clearance, the Weaver X-High Detachable Top Mount Rings are worth considering. However, if you demand absolute precision and rock-solid repeatability, be prepared to invest in a higher-end alternative. Check them out, but consider your specific needs before making a purchase!
