Trijicon RMR Mount for ACOG Scopes with bosses Review

Let’s Dive into Trijicon RMR Mount for ACOG Scopes with bosses

The Trijicon RMR Mount for ACOG Scopes with bosses is a dedicated mounting solution allowing shooters to piggyback a Trijicon RMR (Ruggedized Miniature Reflex) sight on top of their existing ACOG optic. It’s designed specifically for ACOG models with the “bosses,” or raised mounting points, near the eyepiece. This allows for a quick transition between the magnified ACOG and the unmagnified RMR for close-quarters engagements. The mount promises a solid, reliable, and low-profile solution for those wanting both a magnified optic and a red dot on their rifle.

I needed a solution for rapid target acquisition at varying distances. While my ACOG is fantastic for mid-range shooting, transitioning to closer targets required a different aiming solution. I wanted a seamless way to engage targets both near and far without sacrificing the advantages of either optic.

Upon unboxing, the Trijicon RMR Mount for ACOG Scopes with bosses immediately impressed me with its solid feel and clean matte black finish. The machining appeared precise, and the included hardware looked robust. The mount felt substantial in hand, reassuring me of its potential durability.

I considered a few other options, including some aftermarket mounts and even trying to jury-rig a solution. However, I chose the Trijicon mount because of its reputation for quality and the guarantee of a perfect fit with my ACOG. It’s better to spend a little more for something that will work perfectly than waste money on something that might be unreliable.

My initial impression was excitement mixed with a touch of relief. I was excited to finally have a reliable solution for mounting an RMR to my ACOG, and relieved to have chosen a product that seemed to be very well-made. I anticipated a significant improvement in my rifle’s versatility.

Check Best Price HERE

Real-World Testing: Putting Trijicon RMR Mount for ACOG Scopes with bosses to the Test

First Use Experience

My first use was at an outdoor shooting range, where I tested the Trijicon RMR Mount for ACOG Scopes with bosses on my AR-15. I focused on transitioning between the ACOG and RMR at various distances to evaluate speed and accuracy. The weather was sunny and dry, providing ideal conditions for initial testing.

The mount performed flawlessly, maintaining zero on the RMR even after repeated transitions and several hundred rounds fired. The RMR sat securely on top of the ACOG, providing a clear and unobstructed view. The installation was simple and straightforward, requiring only a few minutes.

The transition took very little time to get used to. After a few practice drills, I found myself quickly and efficiently switching between the magnified and unmagnified optics. I did not encounter any issues during the initial range session.

Extended Use & Reliability

After several months of use, including multiple range trips and a tactical training course, the Trijicon RMR Mount for ACOG Scopes with bosses has proven to be incredibly durable. It has withstood exposure to rain, mud, and even a few accidental bumps without losing zero or showing signs of wear. This is important for any piece of equipment you’re relying on to be there for you.

There are no noticeable signs of wear and tear on the mount itself. The matte black finish has held up well, with only minor scratches in the areas where it interfaces with the ACOG and RMR. The included hardware remains secure.

Cleaning the mount is straightforward, requiring only a quick wipe-down with a cloth after each range session. No special maintenance is required. I’ve used other mounts in the past that required constant re-tightening.

The Trijicon RMR Mount for ACOG Scopes with bosses significantly outperforms any other mounting solution I’ve used for piggybacking a red dot on an ACOG. Its rock-solid construction and precise fit provide unparalleled reliability. It enhances the usability of my rifle.

Breaking Down the Features of Trijicon RMR Mount for ACOG Scopes with bosses

Specifications

• Manufacturer: Trijicon. Trijicon‘s reputation for quality and durability is well-earned.
• Color: Black. The matte black finish blends seamlessly with most ACOG and RMR setups.
• Finish: Matte. The matte finish reduces glare and provides a non-reflective surface.
• Fit: All Trijicon RMR’s (not included). This mount is specifically designed for Trijicon RMR red dot sights.
• Fabric/Material: Metal. The robust metal construction ensures long-lasting durability.
• Additional Features: RMR Mount for all 3.5×35, 4×32, and 5.5×50 ACOG Models w/ Bosses. This specifies the exact ACOG models that the mount is compatible with.
• Optic Cut: Not Applicable. It uses screws, not an optic cut.
• Condition: New. This indicates that the product is brand new and unused.
• Red Dot Sights-Footprint: RMR. The mount is specifically designed to accommodate the RMR footprint.

These specifications are crucial because they guarantee compatibility and reliability. The robust materials and precise fit ensure the RMR remains securely mounted and maintains zero, which is essential for accurate shooting.

Performance & Functionality

The Trijicon RMR Mount for ACOG Scopes with bosses excels in providing a stable and secure platform for the RMR. It allows for quick and seamless transitions between the ACOG and RMR, enhancing the rifle’s versatility in various shooting scenarios. Its low-profile design minimizes interference with the primary optic.

The mount’s strength lies in its robust construction and precise fit. A minor weakness might be its weight, adding slightly to the overall weight of the rifle, although the benefit of having both optics readily available outweighs this. It’s a small price to pay for the added capabilities.

The mount not only meets but exceeds expectations. It provides a reliable and functional solution that enhances the overall shooting experience. I would recommend it to anyone in a similar situation.

Design & Ergonomics

The build quality is exceptional. The mount is constructed from durable metal with a matte black finish, providing a robust and non-reflective surface. It feels solid and well-made.

The design is user-friendly, with a straightforward installation process. There’s a minimal learning curve. Anyone familiar with mounting optics on firearms should find it easy to install and use.

Durability & Maintenance

Given its metal construction and quality finish, the Trijicon RMR Mount for ACOG Scopes with bosses is expected to last a very long time. It is built to withstand harsh conditions and heavy use. The quality of the mount is exceptional.

Maintenance is simple, requiring only occasional cleaning with a cloth. No specialized tools or cleaning agents are necessary. This makes maintenance as easy as possible.

Accessories and Customization Options

The mount comes with all the necessary hardware for installation, including screws for both the mount and the RMR. No additional accessories are included. This provides a complete package ready for installation.

The primary customization option is the choice of RMR red dot sight. While the mount is specifically designed for Trijicon RMRs, some users may explore using adapters for other red dot sights with similar footprints. The most important thing is to be able to see the target.

Pros and Cons of Trijicon RMR Mount for ACOG Scopes with bosses

Check Best Price HERE

Who Should Buy Trijicon RMR Mount for ACOG Scopes with bosses?

The Trijicon RMR Mount for ACOG Scopes with bosses is perfect for tactical shooters, law enforcement personnel, and competitive shooters. Anyone who requires a versatile optic setup for both mid-range and close-quarters engagements will benefit greatly. It is ideal for anyone who values reliability and quick target acquisition.

This product might not be ideal for those who prefer a single optic solution or are on a very tight budget. Also, if you do not own an ACOG with bosses, or plan to use a red dot other than an RMR, this mount will not work. You must have the right equipment.

A must-have accessory is a high-quality Trijicon RMR red dot sight to pair with the mount. Consider a lens protector for the RMR to shield it from damage in harsh environments. You want to protect your investment.

Conclusion on Trijicon RMR Mount for ACOG Scopes with bosses

The Trijicon RMR Mount for ACOG Scopes with bosses is a top-tier mounting solution that delivers exceptional performance and reliability. Its robust construction, precise fit, and seamless integration with ACOG optics make it a standout product in its category. I fully endorse this product.

At $98.99, the price is justified by the mount’s quality, durability, and the enhanced versatility it brings to the ACOG platform. The investment is well worth it for those who demand the best in optical solutions. This is something you can rely on.

I would absolutely recommend the Trijicon RMR Mount for ACOG Scopes with bosses to anyone looking to add a red dot sight to their ACOG. If you value quality, reliability, and performance, this mount is a worthwhile investment that will enhance your shooting experience. Upgrade your rifle with the Trijicon RMR Mount for ACOG Scopes with bosses today and experience the difference.