Let’s Talk About USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models
The USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models represents a potentially budget-friendly entry point into the world of red dot sights on Sig Sauer pistols. It promises to securely attach a Trijicon RMR, a popular and highly regarded optic, to a Sig, offering improved target acquisition speed and accuracy. However, purchasing anything used requires careful consideration, and this mount is no exception, particularly given its role in holding a vital aiming device.
I was looking for an affordable way to mount a red dot sight on my Sig Sauer P320 without breaking the bank. I’ve always appreciated the quick target acquisition offered by red dots, especially in dynamic shooting scenarios, but I wasn’t ready to invest in a brand-new, high-end mounting solution just yet. The allure of a used option was its lower price point, offering a chance to experiment with a red dot on my pistol.
Upon receiving the USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models, I immediately assessed its condition. The finish showed some wear, which is expected for a used item, but I was more concerned with the integrity of the mounting points and screw threads. The build quality seemed decent at first glance, though the finish didn’t have the same level of refinement as some of the higher-priced mounts I’ve handled.
Compared to a brand-new Trijicon RMR mount or a Scalarworks option, the USED EDEMO was significantly less expensive. I was willing to trade the pristine condition for the lower price, as long as the mount proved functional and reliable. Ultimately, the price was the deciding factor, allowing me to dip my toes into the red dot pistol world without a huge initial investment.
My first impression was cautiously optimistic. The mount appeared solid enough, but the used condition introduced an element of uncertainty that I wouldn’t have with a new product. I was eager to test it out on the range and see if it would hold zero and withstand the recoil of my Sig.
Real-World Testing: Putting USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models to the Test
First Use Experience
I tested the USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models at my local indoor shooting range. The primary goal was to see if the mount would securely hold my Trijicon RMR and maintain zero throughout a few hundred rounds. I also wanted to assess its ease of installation and overall stability.
The range was relatively dry and climate-controlled, so I didn’t expose the mount to extreme conditions during this initial test. Installation was straightforward, requiring only a few minutes and the appropriate tools. However, I immediately noticed that the screws felt a bit loose, and I needed to apply Loctite to ensure they wouldn’t back out during firing.
After the first few magazines, the RMR seemed to hold zero reasonably well, but I was constantly checking the screws for any signs of loosening. The mount felt adequate for casual range use, but I wasn’t confident in its ability to withstand more demanding scenarios. One concerning issue emerged: slight movement of the RMR was noticeable after approximately 100 rounds.
Extended Use & Reliability
After several weeks of using the USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models, I noticed some concerning issues. The mount showed further signs of wear, with some of the finish wearing off around the edges. The screws continued to be a problem, requiring frequent tightening, even with Loctite applied.
Despite my best efforts, the RMR would occasionally shift slightly during extended shooting sessions. This obviously impacted accuracy, and I found myself constantly re-zeroing the optic. Cleaning and maintenance were simple enough, but the constant need to tighten the screws made the overall experience frustrating.
Compared to previous experiences with high-quality mounts, the USED EDEMO was a significant disappointment. My experience with this mount does not even compare to mounting a new Trijicon mount directly to the pistol slide. I would not trust this mount for a duty weapon or for any scenario where my life might depend on it.
Breaking Down the Features of USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models
Specifications
The exact specifications of the USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models are not readily available, given its “used” status and the lack of official product information. However, based on visual inspection and usage, it’s designed to directly attach a Trijicon RMR to a Sig Sauer pistol slide with the appropriate footprint. The mount is likely constructed from aluminum, though the specific alloy is unknown.
The weight is fairly light, adding minimal bulk to the pistol. The primary function of any mount is to secure the optic. The choice of material and design impacts its durability and ability to withstand recoil.
Performance & Functionality
In terms of performance, the USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models performed adequately for basic range use, but it definitely had limitations. It held the Trijicon RMR in place, but the issues with screws loosening and the optic shifting were significant drawbacks. These issues made it unsuitable for anything beyond casual target practice.
The strength of the mount is its low price point, offering an entry into the world of red dot pistols. The biggest weakness is its unreliability and the potential for the optic to shift during use. Ultimately, it does not meet the expectations of a quality optic mount.
Design & Ergonomics
The build quality of the USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models is adequate, but not exceptional. The aluminum construction keeps the weight down, but the finish is prone to wear. The user-friendliness is high, as the installation process is relatively straightforward.
However, the constant need to tighten screws detracts from the overall experience. There is no discernible learning curve associated with its use.
Durability & Maintenance
The long-term durability of the USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models is questionable, based on my experience. The used condition, combined with the issues of screws loosening, suggests that it may not last very long under heavy use. Maintenance is minimal, requiring only occasional cleaning, but the need to constantly monitor and tighten screws is a significant drawback.
The longevity of this used mount appears limited. Repair, beyond replacing screws, is likely not feasible.
Accessories and Customization Options
The USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models itself doesn’t come with any accessories, besides the mounting screws. However, it is designed to be compatible with any Trijicon RMR footprint optic. Customization options are limited, but you could potentially replace the screws with higher-quality ones or apply a different finish to the mount.
It is only compatible with Trijicon RMR footprint optics. There are no other significant customization options.
Pros and Cons of USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models
Pros
- Affordability: The low price point makes it an accessible entry into red dot pistol shooting.
- Easy Installation: Simple design allows for quick and easy mounting.
- Lightweight: Adds minimal weight to the pistol.
Cons
- Reliability Issues: Screws tend to loosen, causing the optic to shift.
- Durability Concerns: Used condition and questionable material quality raise concerns about long-term durability.
- Lack of Confidence: Would not trust this mount in a self-defense situation.
Who Should Buy USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models?
Perfect for: Someone looking for the absolute cheapest way to mount a Trijicon RMR to their Sig for casual range use.
Who should skip this product? Anyone who relies on their pistol for self-defense or competitive shooting. This mount lacks the reliability and durability required for demanding scenarios.
Must-have accessories or modifications? High-quality screws and Loctite are essential to mitigate the loosening issues. Consider a higher-quality mount for serious use.
Conclusion on USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models
The USED EDEMO Trijicon RMR RM50 Pistol Mount, Sig – 1 out of 21 models offers a budget-friendly option for mounting a Trijicon RMR on a Sig pistol, but it comes with significant compromises. The low price is appealing, but the reliability issues and questionable durability make it unsuitable for serious use. The constant need to tighten screws and the potential for the optic to shift are major drawbacks.
The value proposition is questionable, as the potential cost savings are offset by the lack of reliability. I would personally not recommend it for anyone who relies on their pistol for self-defense or competitive shooting. For those users, investing in a higher-quality mount from a reputable manufacturer is a much wiser choice.
If you’re just looking to experiment with a red dot on your pistol and don’t mind the risk of occasional issues, this mount might suffice. But if you value reliability and performance, I strongly suggest looking elsewhere. Do yourself a favor and invest in a quality mount that you can trust your life with.