Let’s Dive into USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models
The USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models offers an affordable way to potentially upgrade or modify your SIG SAUER P320. This particular module is designed for 9/40/357 caliber compact P320s and comes in a small size, featuring a black finish. Considering the relatively low price of $77.99, even for a used module, I was intrigued.
I was looking to experiment with the grip ergonomics of my P320 compact without shelling out for a brand-new module. The promise of the X-Series grip, known for its improved texture and undercut trigger guard, was tempting. I wanted to see if it would genuinely enhance my shooting experience, especially given the used condition.
The module arrived in a simple, padded envelope – no fancy unboxing experience here! My first impression was mixed. While the polymer felt solid, the signs of wear were definitely present, which I expected given its used status.
I considered purchasing a new SIG SAUER X-Series grip module, costing roughly twice the price, and a comparable module from Armory Craft, known for their aggressive texturing. I ultimately chose this used option due to its lower price point and the allure of genuine SIG SAUER parts, figuring I could always upgrade later if needed. The price and name brand piqued my curiosity more than the other options.
Honestly, I was cautiously optimistic. The wear and tear made me wonder about its long-term durability and whether it would truly improve my grip. My initial thoughts were, “Will this be a worthwhile upgrade, or just a cosmetic change with potential issues?”
Real-World Testing: Putting USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models to the Test
First Use Experience
My first range trip with the USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models was a mixed bag. I tested it at my local indoor range, firing approximately 200 rounds of 9mm through my P320 compact. The lighting was good, but the range itself was quite dry and produced airborne particulate.
While the X-Series grip did feel slightly better than the stock grip, the difference wasn’t as dramatic as I’d hoped. In particular, the undercut trigger guard provided a slightly higher hand position, but the used texture seemed worn down in places, reducing its effectiveness. I found the grip comfortable in my hand, but after rapid firing, I could tell that the wear affected my handling.
Installation was straightforward, thanks to the P320’s modular design. However, I noticed that the used module had a slightly looser fit compared to my original factory grip. This didn’t affect function, but it was noticeable. I experienced no immediate malfunctions, but the loose fit did cause some concern.
Extended Use & Reliability
After several weeks and approximately 500 additional rounds, the USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models has held up reasonably well. The slight looseness I initially observed has not worsened, but it’s still present. There are no new visible signs of wear and tear beyond what existed upon purchase.
The polymer construction seems durable, even with the initial wear. I’ve cleaned the grip module after each range trip using a standard gun cleaning solvent and brush, and it has been easy to maintain. I will, however, continue to check the loose-fitting issue.
Previously, I’d used a stock P320 grip and a Wilson Combat P320 grip module. Compared to the stock grip, the X-Series offers a marginal improvement in ergonomics. The Wilson Combat module provides a much more significant upgrade in terms of grip texture and overall feel, justifying its higher price. It does not, however, have the wiggle factor that I have noticed.
Breaking Down the Features of USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models
Specifications
The USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models is designed for SIG SAUER P320 compact models chambered in 9mm, .40 S&W, and .357 SIG. It is a small size, intended for shooters with smaller hands or those who prefer a more compact grip. The module is constructed from black polymer.
- Caliber Compatibility: 9mm, .40 S&W, .357 SIG – This versatility ensures compatibility with various P320 platforms.
- Size: Compact, Small – Ideal for concealed carry and shooters with smaller hands.
- Material: Polymer – Offers a balance of durability and weight reduction.
- Color: Black – A classic and discreet finish.
- Compatibility: SIG SAUER P320 Compact – Designed specifically for this platform.
These specifications impact performance by affecting grip comfort, recoil control, and overall handling. The compact size enhances concealability, while the polymer construction ensures reasonable durability. The compatibility ensures easy installation.
Performance & Functionality
The USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models performs adequately as a grip module, providing a functional interface between the shooter and the firearm. However, the used condition affects its performance to some degree. The wear on the grip texture reduces its effectiveness in providing a secure hold, especially during rapid firing or in wet conditions.
The grip’s strength is its improved ergonomics over the standard P320 grip. The undercut trigger guard allows for a higher hand position, potentially aiding in recoil management. A definite weakness is the used nature, as it causes looseness.
The grip meets expectations for a functional grip module, but it falls short of the performance of a new X-Series or aftermarket grip. I would have been much happier had it not been worn when I purchased it.
Design & Ergonomics
The USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models features the design enhancements of the X-Series, including the aforementioned undercut trigger guard. It also incorporates a slightly more aggressive texture than the standard P320 grip. The polymer construction is lightweight and feels reasonably solid, but the wear detracts from the overall build quality.
The grip is user-friendly, as it installs easily onto the P320 fire control unit. There is no significant learning curve, though getting used to the slightly different grip angle may take a few rounds. It is certainly an upgrade for some shooters.
Durability & Maintenance
The polymer construction of the USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models suggests it will last for many years, provided it’s not abused. However, the used condition introduces some uncertainty. The existing wear and tear may accelerate further degradation over time.
The grip module is easy to maintain. Regular cleaning with a standard gun cleaning solvent is sufficient to keep it in good working order. Regular checks of the wiggle/loose fitting should also be performed.
Accessories and Customization Options
The USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models does not come with any accessories. However, it is compatible with all standard P320 magazines and holsters designed for the compact model. It can also be customized with aftermarket stippling or grip tape to enhance the texture.
While it’s a SIG SAUER product, compatibility extends to various aftermarket accessories. For example, magazine baseplates from Tactical Development will fit perfectly. Aftermarket trigger upgrades also still work.
Pros and Cons of USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models
Pros
- Improved ergonomics compared to the standard P320 grip.
- Undercut trigger guard allows for a higher hand position.
- Relatively inexpensive way to upgrade your P320.
- Compatible with all standard P320 accessories.
- Genuine SIG SAUER part.
Cons
- Used condition means potential wear and tear.
- Grip texture may be worn down, reducing its effectiveness.
- May have a looser fit compared to a new grip module.
Who Should Buy USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models?
Perfect for: Shooters on a budget who want to experiment with the X-Series grip design without paying full price. Those who are willing to accept some cosmetic imperfections and potential wear and tear. It may also suit individuals looking for a very specific grip size or shape that is hard to find new.
Who should skip this product? Shooters who demand pristine condition and maximum grip texture. Those who are unwilling to accept any potential issues with fit or durability. Anyone who places an extremely high premium on having brand new equipment.
Must-have accessories or modifications? Grip tape or aftermarket stippling to enhance the grip texture. A thorough inspection upon arrival to identify any significant issues. Perhaps a small amount of gun grease to tighten the fitting issue.
Conclusion on USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models
The USED SIG SAUER Grip Module Assy, 320 X-Series, – 1 out of 15 models offers a budget-friendly entry point into the world of P320 grip customization. The value proposition is debatable. While the price is certainly lower than a new module, the used condition introduces compromises in terms of grip texture and overall fit.
I would cautiously recommend it to shooters on a tight budget who understand the risks involved. However, I would strongly advise inspecting the module carefully upon arrival and being prepared to invest in grip tape or other modifications to improve the texture. In the end, I would consider purchasing a brand-new one.
Ultimately, this grip module is a gamble. If you’re lucky, you’ll get a lightly used grip that offers a decent upgrade over the standard P320 grip. If not, you may end up with a worn-out module that requires additional investment to make it worthwhile.