Let’s Dive into Evolution Gun Works Delrin Ring Inserts, 1in.
As an outdoor and tactical gear specialist, I’ve mounted countless scopes over the years. Achieving the perfect fit and alignment is paramount for accuracy, and that’s where ring inserts come into play. The Evolution Gun Works Delrin Ring Inserts, 1in. promise a simple solution for adapting 30mm scope rings to accommodate 1-inch scope tubes.
My primary need was versatility. I have several high-quality 30mm rings but also own a few older scopes with 1-inch tubes that I wanted to use. Rather than investing in a completely new set of rings for each scope, I sought an affordable and reliable adapter.
Upon unboxing, the Evolution Gun Works inserts felt surprisingly lightweight, thanks to their delrin construction. The machining appeared clean and precise. My initial thought was, “These seem too simple to be effective,” but I remained optimistic.
I considered other options, such as buying dedicated 1-inch rings, but this Evolution Gun Works solution offered significant cost savings. Compared to purchasing multiple sets of rings, the price of $14.99 for the inserts seemed like a steal. My first impression was cautious optimism; I hoped these little pieces of polymer could truly bridge the gap between my 30mm rings and 1-inch scopes.
Real-World Testing: Putting Evolution Gun Works Delrin Ring Inserts, 1in. to the Test
First Use Experience
I tested the Evolution Gun Works Delrin Ring Inserts, 1in. at an outdoor shooting range. The rifle I used was a .308 bolt-action, and the scope was a classic 3-9×40 with a 1-inch tube. I mounted the scope with the inserts into a pair of Evolution Gun Works 30mm tactical rings.
The weather was clear and sunny, typical for a California afternoon. The inserts themselves were easy to install, fitting snugly within the 30mm rings. However, I did notice a slight gap even with the inserts in place, which made me a little uneasy about proper scope alignment.
I spent extra time ensuring the scope was level and properly torqued. After the first few shots, the point of impact was off, which made me suspect the inserts might be shifting. It took several adjustments to zero the rifle, and even then, the accuracy seemed slightly less consistent than when using dedicated 1-inch rings.
Extended Use & Reliability
After several weeks of use, involving approximately 200 rounds fired, the Evolution Gun Works Delrin Ring Inserts, 1in. showed no visible signs of wear. They remained intact and didn’t crack or deform. However, the initial feeling of slight instability persisted.
While the inserts themselves were durable, I found myself constantly checking the scope to ensure it hadn’t shifted. The maintenance was minimal – there’s really nothing to clean or maintain with these inserts. Compared to using dedicated 1-inch rings, these inserts felt like a compromise.
They did the job, but with a slight decrease in confidence regarding long-term zero retention. With properly sized rings, there is a solid lockup and superior clamping force.
Breaking Down the Features of Evolution Gun Works Delrin Ring Inserts, 1in.
Specifications
The Evolution Gun Works Delrin Ring Inserts, 1in. are specifically designed to reduce the opening of EGW 30mm Tactical Scope Rings to accommodate 1-inch diameter scope tubes. They are constructed from machined polymer, specifically delrin. These inserts are intended solely for use with EGW 30mm Tactical Scope Rings.
The delrin material offers a balance of strength and flexibility, theoretically providing a secure grip on the scope tube without damaging it. However, this same flexibility can also contribute to the feeling of instability.
Performance & Functionality
The primary function of the Evolution Gun Works Delrin Ring Inserts, 1in. is to allow the use of 1-inch scopes with 30mm rings. In this regard, they technically perform their intended function. However, the performance is not without compromise.
The accuracy and reliability were slightly less consistent compared to using dedicated 1-inch rings. The biggest weakness is the potential for slight scope shift due to the inherent flexibility of the delrin material and the resulting lessened clamping force. They meet expectations for basic functionality, but fall short for precision applications.
Design & Ergonomics
The Evolution Gun Works Delrin Ring Inserts, 1in. boast a simple, unassuming design. The delrin material is lightweight. The inserts are easy to handle and install.
There is virtually no learning curve; simply place them inside the 30mm rings before mounting the scope. However, the snugness of the fit within the 30mm rings could be improved.
Durability & Maintenance
The delrin material used in the Evolution Gun Works Delrin Ring Inserts, 1in. appears to be quite durable. They are resistant to cracking and deformation under normal use. These inserts require virtually no maintenance.
Simply wipe them clean if they get dirty. The lifespan should be considerable, assuming they are not subjected to extreme temperatures or abuse.
Accessories and Customization Options
The Evolution Gun Works Delrin Ring Inserts, 1in. are a standalone product and do not come with any additional accessories. They are designed specifically for use with EGW 30mm Tactical Scope Rings and do not offer any customization options. No additional accessories are needed.
They are not compatible with rings from other brands. There is no need for add-ons.
Pros and Cons of Evolution Gun Works Delrin Ring Inserts, 1in.
Pros
- Affordable solution for using 1-inch scopes with 30mm rings.
- Simple and easy to install.
- Durable delrin construction.
- Lightweight and unobtrusive.
- Cost-effective alternative to purchasing new rings for each scope.
Cons
- Potential for slight scope shift due to flexibility of delrin.
- May not provide the same level of precision and stability as dedicated 1-inch rings.
- Not ideal for high-precision or long-range shooting.
Who Should Buy Evolution Gun Works Delrin Ring Inserts, 1in.?
The Evolution Gun Works Delrin Ring Inserts, 1in. are perfect for budget-conscious shooters who occasionally need to mount a 1-inch scope on a rifle with 30mm rings. They are suitable for casual range use, hunting at moderate distances, or anyone looking for a simple, inexpensive solution.
Those who require the utmost precision, such as competitive shooters or long-range hunters, should skip this product and invest in dedicated 1-inch rings for optimal stability and accuracy. There are no must-have accessories. However, a high-quality torque wrench is recommended for proper ring installation regardless of which rings or inserts are used.
Conclusion on Evolution Gun Works Delrin Ring Inserts, 1in.
The Evolution Gun Works Delrin Ring Inserts, 1in. offer a budget-friendly way to adapt 30mm scope rings for use with 1-inch scope tubes. While they get the job done, they don’t provide the same level of rock-solid stability as dedicated 1-inch rings. The $14.99 price is certainly justified for the convenience they offer.
I would recommend these inserts for casual use and shooters on a tight budget, but I would caution against using them for precision applications. For critical applications, use the right rings for the scope. Consider whether you truly need an adaptor, or if you would be better served with proper rings for each optic.