Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts Review

Let’s Dive into Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts

The Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts promise a simple and affordable solution for mounting 1-inch scopes on Picatinny or Weaver rails. Marketed by Sniper, these mounts aim to provide enhanced eye relief and a clear sight picture. At a price point of $5.57, these scope mounts beckon budget-conscious shooters to upgrade their rifle setups.

I needed a riser mount for my AR-15 build. The existing iron sights were difficult to use with my cheek weld, and I wanted to try out a 1-inch diameter scope I had lying around, without breaking the bank.

The Sniper mounts arrived in a simple plastic bag. My first impression was that they felt surprisingly lightweight; the matte anodized black finish looked decent enough for the price.

I also considered a couple of other options: a UTG Accu-Sync mount, known for its robust build, and a slightly more expensive Vortex Optics Hunter mount, but I picked the Sniper because of its low price for an initial test and evaluation. Honestly, I was skeptical but intrigued by the low cost.

My initial reaction was a mix of curiosity and caution. At this price, my expectations were low, but I hoped they would perform adequately for casual range use.

Check Best Price HERE

Real-World Testing: Putting Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts to the Test

First Use Experience

My first test was at an outdoor shooting range in moderately sunny conditions. I mounted the Sniper mounts on my AR-15’s Picatinny rail and secured a 1-inch scope. The thumb screws made installation quick and easy, as advertised.

The riser provided adequate eye relief, improving my sight picture significantly. However, the lightweight construction made me a little nervous about recoil affecting zero over time.

It took a few shots to get the scope dialed in, but the mounts held steady throughout the initial session. One surprise was how well the “see thru” design worked; I could still vaguely use the iron sights beneath the scope in a pinch, although not perfectly.

Extended Use & Reliability

After several range trips spanning a few months, the Sniper mounts have shown some wear. The finish has started to fade slightly around the thumb screws.

I’ve noticed that the screws require occasional tightening to maintain zero, especially after firing multiple magazines in quick succession. Cleaning is easy enough with a basic brush and solvent.

Compared to a heavier, more expensive mount I used previously, the Sniper mounts definitely fall short in long-term reliability. However, considering the price difference, it’s an acceptable trade-off for casual shooting.

Breaking Down the Features of Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts

Specifications

• The Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts are designed to accommodate 1-inch diameter rifle scopes. This is a crucial specification for ensuring compatibility with your optic.
• They are constructed from aircraft-grade aluminum with a matte anodized black finish. This aims to provide a balance of lightweight and reasonable durability.
• The mounts weigh just 1.4 ounces. This low weight is beneficial for reducing overall rifle weight, but potentially at the cost of long-term durability.
• The base is compatible with both Picatinny and Weaver rails. This versatility ensures compatibility with a wide range of rifles and platforms.
• The dimensions are: Length 1.22 inches, Width 1.5 inches, and Height 1 inch. These dimensions determine the amount of rise and the space occupied on the rail.
• The center of the ring to the top of the rail/base mount is 0.95 inches. This measurement dictates the height of the scope above the rail, influencing eye relief.

Performance & Functionality

The primary function of these mounts is to provide a stable platform for a 1-inch scope while raising it to a comfortable height for the shooter. They achieve this reasonably well, particularly for the price.

Their main strength is their affordability and ease of installation. However, their weakness lies in their long-term stability under heavy recoil.

They meet expectations for a budget-friendly option, but don’t exceed them. More serious shooters should consider investing in more robust mounts.

Design & Ergonomics

The mounts feature a simple, two-slot design. The aircraft-grade aluminum keeps the weight down.

The thumb screws allow for quick and easy attachment to the rifle’s rail. However, they can be prone to loosening over time.

Durability & Maintenance

Given the lightweight aluminum construction, these mounts are not designed for extreme durability. Expect some wear and tear with frequent use.

Maintenance is minimal, requiring only occasional cleaning and tightening of the screws. For the price, they offer acceptable longevity.

Accessories and Customization Options

The Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts don’t come with any additional accessories. They are designed to be a standalone mounting solution.

These mounts are compatible with any standard 1-inch rifle scope. The two-slot design may limit the scope’s fore-aft positioning compared to longer rails.

Pros and Cons of Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts

Check Best Price HERE

Who Should Buy Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts?

The Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts are perfect for casual shooters on a tight budget. They are suitable for airsoft enthusiasts or anyone looking for a basic mounting solution for light-recoil rifles.

This product is not recommended for serious hunters, competitive shooters, or anyone using high-powered rifles. Those individuals should invest in more robust and reliable mounting solutions.

A must-have modification might be replacing the thumb screws with higher-quality alternatives for improved stability. Also, consider using thread locker on the screws to prevent loosening.

Conclusion on Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts

The Sniper 2 Slot High Profile Riser Rifle 1in Scope Mounts offer an entry-level solution for mounting 1-inch scopes. They deliver basic functionality at an unbeatable price.

The value proposition is simple: you get what you pay for. While they may not be the most durable or reliable option, they serve their purpose for casual use.

I would recommend these mounts to shooters on a very limited budget who need a simple riser solution. If you are serious about shooting, however, consider saving up for a higher-quality alternative. For a cheap and cheerful upgrade, they’re worth a try, but remember to keep those screws tight!