Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models Review

Let’s Dive into Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models

The Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models isn’t the sexiest piece of reloading equipment. However, it’s a crucial component for achieving unparalleled accuracy. Manufactured by Hornady, this small bushing plays a significant role in neck sizing cases, a process vital for consistent bullet seating and, ultimately, superior shot-to-shot precision.

I was chasing that elusive sub-MOA group with my custom .243 Winchester. I was already using quality bullets and carefully weighing powder charges. The one area I hadn’t fully optimized was neck tension.

The Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models comes in a simple, clear plastic case. The bushing itself is a small, precisely machined ring of hardened steel. Its heft gives it a feeling of quality, and the smooth, polished interior surface speaks to the attention to detail.

I had considered using a universal neck sizing die or simply relying on the expander ball in my full-length sizing die. I ultimately chose the Hornady system for its ability to precisely control neck tension and minimize brass working. This seemed like the most refined approach to accuracy.

My initial reaction was cautiously optimistic. It’s a small part, but I understood its potential impact. I was eager to see if it would deliver the improved consistency I was seeking.

Check Best Price HERE

Real-World Testing: Putting Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models to the Test

First Use Experience

My primary testing ground is my home reloading bench and the adjacent shooting range. This range offers distances out to 300 yards. I tested the bushing in conjunction with my Hornady New Dimension dies and my RCBS Rock Chucker Supreme press.

Conditions were typical for a late summer day – warm and relatively dry, with a slight breeze. I used carefully prepped brass and weighed powder charges to further minimize variables. The process was straightforward; the bushing fit perfectly into the Hornady neck sizing die.

The initial sizing felt smooth and consistent. The resulting neck tension felt noticeably more uniform than with my previous method. I did notice that the bushing required a light coat of sizing wax for optimal performance.

Extended Use & Reliability

After several hundred rounds using the Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models, it has held up remarkably well. There are no visible signs of wear or degradation. The internal surface remains smooth and polished.

The bushing has proven to be exceptionally durable. It shows no signs of deformation or damage despite consistent use with various brass brands. Cleaning is simple: a quick wipe with a clean cloth removes any residue.

It has significantly outperformed my previous attempts at neck sizing. I’ve consistently achieved smaller group sizes and more uniform velocities, validating its value in my reloading process. The tightest groups shrank by roughly 0.2 MOA on average.

Breaking Down the Features of Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models

Specifications

The Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models is a precision-machined steel ring designed for use with Hornady New Dimension neck sizing dies. Its internal diameter is precisely .247 inches. It is one of 62 different bushing sizes offered by Hornady, in .002-inch increments.

The .247″ dimension is specifically designed for achieving optimal neck tension on .243 caliber cartridges. This precise sizing allows for consistent bullet seating and minimizes bullet runout. The hardened steel construction ensures durability and long-lasting performance.

Performance & Functionality

The Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models performs its job admirably. It consistently sizes case necks to the specified diameter, ensuring proper neck tension for optimal accuracy. This is essential for competitive shooting and precision hunting applications.

Its main strength lies in its precision and consistency. The bushing is easy to install and use, contributing to a smooth and efficient reloading process. The only area for possible improvement is clearer labeling of the bushing size directly on the part itself.

It has definitely exceeded my expectations. The improvement in accuracy and consistency has been noticeable, making it a worthwhile investment for my reloading setup. My SD (Standard Deviation) in velocity dropped from around 15 fps to single digits.

Design & Ergonomics

The bushing is a simple yet effective design. Its small size and smooth surface make it easy to handle. The hardened steel construction inspires confidence in its durability.

It is very user-friendly. There’s virtually no learning curve, and it integrates seamlessly with the Hornady die system. The quality of the build provides a premium feel.

Durability & Maintenance

This bushing is built to last a lifetime. The hardened steel construction resists wear and deformation, ensuring consistent performance over thousands of reloading cycles. With proper care, it should easily outlive my rifles.

Maintenance is minimal. A quick wipe with a clean cloth after each reloading session is sufficient to keep it in optimal condition. No special cleaning solutions are required.

Accessories and Customization Options

The primary accessory is the Hornady New Dimension neck sizing die, which is required to use the bushing. Hornady offers a complete range of bushings in .002″ increments, allowing reloaders to fine-tune neck tension for different bullet brands and brass thicknesses. This enables highly customized reloading.

The Hornady bushings are generally compatible only with Hornady dies. Other brands may have slightly different dimensions. This limits cross-compatibility but ensures optimal performance within the Hornady system.

Pros and Cons of Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models

Check Best Price HERE

Who Should Buy Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models?

This bushing is perfect for precision reloaders. Those who want the smallest possible groups, competitive shooters, and serious hunters seeking maximum accuracy will benefit most. Anyone using a .243 or similar caliber and desiring ultimate control over neck tension should consider this.

Those who are just starting out in reloading or who are primarily concerned with high-volume ammunition production might not need this level of precision. Also, if you already have a neck sizing system from another brand and are satisfied with its performance, there’s no need to switch.

A must-have accessory is a set of Hornady New Dimension dies. It’s also beneficial to have a micrometer to measure bullet diameter and case neck thickness for optimal bushing selection. Neck turning tools might be considered for extreme accuracy.

Conclusion on Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models

The Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models is a small but mighty component that can make a significant difference in reloading accuracy. It offers precise and consistent neck sizing, resulting in improved bullet seating and reduced bullet runout. This translates directly into tighter groups and more consistent velocities.

At $35.90, the price is justified for those seeking maximum accuracy and consistency in their reloads. It’s an investment that pays off with improved performance and enhanced confidence in your ammunition.

I would wholeheartedly recommend this product to anyone serious about precision reloading. If you’re chasing that last bit of accuracy, the Hornady Match Grade Bushing .247, NSN N, 594247 – 1 out of 62 models is a must-have. Invest in your accuracy, and experience the difference for yourself!