Let’s Dive into Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models
The Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models is a small but crucial component for reloaders using Hornady progressive presses. It’s essentially the heart of consistent powder dispensing, and with 50 different sizes available, finding the right one is key to achieving accurate loads. This particular bushing, Size 366, is designed to meter a specific range of powder charges, and choosing the correct one is paramount for safety and accuracy.
My journey with this particular bushing started when I was trying to fine-tune my .223 reloading process. I had switched to a new powder and was struggling to get consistent charges with my existing bushings. The inconsistency was leading to unacceptable variations in my velocities, and thus, accuracy suffered.
The Hornady bushing comes in a simple, no-frills package – a small, clearly labeled plastic bag. Upon opening, the bushing itself feels solid and well-made. The internal bore is smooth and consistent, promising consistent powder throws.
I considered other brands, but ultimately went with Hornady because of their reputation for quality and the wide range of bushing sizes available. I knew I could find the perfect fit for my needs with Hornady. My first impression was one of cautious optimism; I hoped this would be the solution to my powder metering woes.
Real-World Testing: Putting Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models to the Test
First Use Experience
I primarily tested this bushing at my reloading bench in my garage. The garage isn’t climate-controlled, so temperatures ranged from cool mornings to hot afternoons during the testing period. I used the bushing with a Hornady Lock-N-Load AP progressive press.
The bushing performed admirably across the temperature spectrum, consistently throwing charges within +/- 0.1 grain. Ease of use was excellent; it simply snaps into place on the powder measure. After the first few throws to settle the powder, the consistency was very impressive.
No real issues arose during initial use, though I did make sure to double-check the powder charges with a digital scale for the first 50 rounds or so. It’s always good practice, and it gave me confidence in the bushing’s performance.
Extended Use & Reliability
After several months of reloading thousands of rounds, the Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models has held up remarkably well. There are no signs of wear or degradation. It consistently delivers accurate powder charges.
Durability seems excellent; the bushing is made of a hard, durable plastic that resists chipping or cracking. Maintenance is minimal; a quick wipe with a clean cloth every few reloading sessions is all that’s needed. Compared to my previous experiences with generic bushings, the Hornady offering is a clear step up in terms of consistency and reliability.
Breaking Down the Features of Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models
Specifications
- Size: 366 – Indicates the internal diameter of the bushing, determining the volume of powder dispensed.
- Material: High-impact Polymer – Offers durability and resistance to chemical breakdown from different powders.
- Compatibility: Hornady Lock-N-Load Powder Measure – Specifically designed for use with Hornady progressive presses and powder measures.
- Precision Machined: Ensures consistent internal dimensions for accurate powder metering.
- Identifiable Marking: Each bushing is clearly marked with its size for easy identification and selection.
These specifications are critical because they directly impact the consistency and accuracy of your reloads. The precise machining guarantees that each bushing throws the specified powder charge. This leads to consistent velocities and improved accuracy downrange. The durable polymer construction ensures the bushing will last for thousands of rounds without degrading.
Performance & Functionality
The Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models excels at its primary function: dispensing consistent powder charges. Accuracy is excellent, consistently throwing charges within +/- 0.1 grain with most powders I tested. Reliability is also a strong point; the bushing has proven to be durable and dependable over thousands of rounds.
The only slight weakness is that finding the exact bushing size for a specific powder and charge weight can take some experimentation. This is inherent to the bushing system, however, and not a fault of the Hornady product itself. Overall, it significantly exceeds my expectations for such a simple, inexpensive component.
Design & Ergonomics
The build quality is excellent for a polymer bushing. The material feels robust and durable. Ergonomically, there’s not much to say; it’s a simple component that fits easily into the Hornady Lock-N-Load Powder Measure.
There is virtually no learning curve; simply insert the bushing into the powder measure, adjust the metering insert if necessary, and start reloading. It is inherently user-friendly.
Durability & Maintenance
Given the high-impact polymer construction, I expect this bushing to last for years of regular use. It is designed to withstand the rigors of high-volume reloading.
Maintenance is simple. A quick wipe with a clean cloth or brush to remove any powder residue is all that’s required. No special tools or cleaning solutions are needed.
Accessories and Customization Options
The Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models doesn’t have accessories in the traditional sense. The main customization option is selecting the appropriate bushing size for your desired powder charge.
The bushing works seamlessly with other Hornady reloading components, such as the Lock-N-Load Powder Measure and Lock-N-Load AP progressive press. It is also compatible with aftermarket powder baffles designed for the Hornady powder measure.
Pros and Cons of Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models
Pros
- Accurate and consistent powder charges.
- Durable and long-lasting construction.
- Easy to install and use.
- Affordable price point.
- Wide range of sizes available to fine-tune powder charges.
Cons
- Requires some experimentation to find the perfect size for a specific powder and charge weight.
- Only compatible with Hornady powder measures.
Who Should Buy Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models?
The Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models is perfect for reloaders who use Hornady Lock-N-Load progressive presses and are looking for consistent and accurate powder dispensing. It’s ideal for high-volume reloaders who want to streamline their process and minimize variations in their ammunition. Competitive shooters who demand the utmost accuracy from their handloads will also find this bushing to be a valuable tool.
If you use a different brand of reloading press or powder measure, this bushing won’t be compatible. It’s also not necessary for those who only reload a small number of rounds or prefer to hand-weigh each charge.
A must-have accessory is a complete set of Hornady powder charge bushings. This allows you to quickly and easily switch between different powder types and charge weights. A good digital scale is also essential for verifying the accuracy of your powder charges.
Conclusion on Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models
The Hornady Powder Charge Bushing, Size 366, 29532 – 1 out of 50 models is a simple yet essential component for any serious reloader using Hornady equipment. At a price of $9.70, it’s an absolute bargain for the accuracy and consistency it provides.
I would wholeheartedly recommend this bushing to anyone looking to improve the quality and consistency of their reloads. It’s a small investment that can make a big difference in your shooting performance. Upgrade your reloading setup today and experience the precision of Hornady!