First Thoughts on the Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black is a seemingly simple, yet incredibly useful accessory for anyone running a Mossberg 590A1. Magpul is a name synonymous with quality, and this mount promised to deliver a robust and versatile sling attachment point. I’ve always preferred a side-mounted sling on my shotguns, finding it provides better balance and keeps the receiver clear of any sling interference, so this product immediately caught my eye.
For years, I struggled finding a good sling mounting solution for my 590A1. Many options either felt flimsy, interfered with the forend, or required permanent modifications to the shotgun. The Magpul mount promised an easy, non-destructive installation, which was a major selling point for me. I had been using a generic barrel clamp sling mount before, but it slipped easily and marred the finish of my magazine tube.
Upon receiving the Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black, I was immediately impressed with its heft. The precision-cast steel construction felt incredibly solid, inspiring confidence that it could withstand years of hard use. Its black Melonite finish gave it a sleek, professional look that blended seamlessly with the shotgun’s aesthetics. Compared to my previous, cheaper sling mount, this felt like a serious upgrade. I was eager to install it and see how it performed.
I considered options from GG&G and CDM Gear, but ultimately chose the Magpul due to its reputation for quality and the dual sling attachment options. The ability to use both QD sling swivels and clip-in style attachments was a huge plus. My initial excitement was high; the mount felt well-made and addressed a long-standing issue I had with my 590A1.
Real-World Testing: Putting Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black to the Test
First Use Experience
My first test of the Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black was at an outdoor shooting range during a shotgun training course. The weather was fairly mild, but the range was dusty, which can sometimes cause issues with small parts. I used a two-point sling, attaching it to the Magpul mount on the forward end and the stock on the rear.
The mount performed flawlessly during the entire training session. It held securely to the barrel and magazine tube, even after firing hundreds of rounds of varying loads. The side sling position made transitioning between shooting stances much smoother, and the shotgun felt noticeably more balanced than before. There were no issues with slippage or movement of the mount, even under heavy recoil.
Extended Use & Reliability
After several months of regular use, the Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black continues to impress. I’ve used it during multiple range trips, a hunting excursion in wet conditions, and even a weekend survival training exercise. The mount has held up remarkably well, showing no signs of wear or loosening.
The Melonite finish has proven to be extremely durable, resisting scratches and corrosion despite exposure to harsh environments. Cleaning is simple; I just wipe it down with a lightly oiled cloth after each use. Compared to my old barrel clamp, which required frequent tightening and eventually damaged the shotgun’s finish, the Magpul mount is a significant improvement in both performance and reliability. It has exceeded my expectations and become an indispensable part of my 590A1 setup.
Breaking Down the Features of Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black
Specifications
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black is designed specifically for the Mossberg 590A1 series of shotguns with factory extended magazine tubes. It is constructed from precision-cast steel for maximum strength and durability. The mount is finished with a Melonite treatment for exceptional wear and corrosion resistance.
The mount provides both a push-button QD sling swivel attachment point and a loop for one-point clip-in style attachments. The loop size is suitable for various attachment types, including MS3 Paraclips, HK hooks, and ITW MASH hooks. It’s critical to note that this mount is specifically designed for the 590A1’s heavy-walled barrel and will not fit other Mossberg models.
Performance & Functionality
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black excels at providing a secure and versatile sling attachment point. The side-mounted position improves shotgun balance and allows for smoother transitions. The dual attachment options offer flexibility in sling setup, catering to different shooting styles and preferences.
Its strength and reliability are major assets. The mount stays securely in place, even under heavy recoil, ensuring the sling remains properly attached. The only potential downside is the limited compatibility; it only fits the Mossberg 590A1.
Design & Ergonomics
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black features a simple, yet effective design. The steel construction gives it a solid, robust feel, while the Melonite finish adds a touch of sleekness. Installation is straightforward and requires no permanent modifications to the shotgun.
The mount sits close to the barrel, minimizing interference with the forend. Its low profile helps to maintain the shotgun’s streamlined appearance. There’s no real learning curve; it’s easy to install and use right out of the box.
Durability & Maintenance
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black is built to last. The steel construction and Melonite finish make it incredibly resistant to wear, corrosion, and impact damage. With proper care, it should provide years of reliable service.
Maintenance is minimal; a simple wipe-down after each use is typically sufficient. The mount’s simple design also makes it easy to inspect for any signs of damage or wear.
Accessories and Customization Options
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black itself doesn’t come with any accessories, but it’s designed to be compatible with a wide range of sling attachments. It works seamlessly with push-button QD sling swivels, allowing for quick and easy sling attachment and detachment. The loop also accepts various clip-in style attachments, providing further customization options.
While the mount doesn’t directly support optics or other accessories, its low profile ensures it doesn’t interfere with the mounting of other aftermarket parts. You can use it in conjunction with other Magpul accessories or components from other manufacturers without any compatibility issues.
Pros and Cons of Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black
Pros
- Secure and reliable sling attachment point.
- Durable steel construction with Melonite finish for excellent corrosion resistance.
- Provides both QD swivel and clip-in sling attachment options for maximum versatility.
- Easy, non-destructive installation, requiring no permanent modifications.
- Improves shotgun balance and allows for smoother transitions.
Cons
- Only compatible with Mossberg 590A1 models with factory extended magazine tubes.
- The price is slightly higher than some basic barrel clamp sling mounts.
Who Should Buy Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black?
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black is perfect for anyone who owns a Mossberg 590A1 and wants a reliable, versatile, and non-destructive sling mounting solution. It’s ideal for tactical shooters, home defense enthusiasts, and anyone who values quality and durability. This mount is especially beneficial for those who prefer a side-mounted sling for improved balance and maneuverability.
Anyone who does not own a Mossberg 590A1 with the factory-extended magazine tube should skip this product, as it will not fit properly. Those looking for the absolute cheapest sling mounting option might find it slightly expensive, but the quality and reliability justify the price.
A quality sling (either single-point or two-point) is a must-have accessory to pair with this mount.
Conclusion on Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black
The Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black is an outstanding accessory that delivers on its promises. Its robust construction, versatile attachment options, and easy installation make it a worthwhile investment for any 590A1 owner. The price of $24.49 is more than justified by the product’s quality and performance.
I would absolutely recommend this mount to anyone looking for a reliable and effective sling solution for their Mossberg 590A1. It’s a testament to Magpul‘s commitment to quality and innovation. If you’re tired of flimsy sling mounts that slip or damage your shotgun, do yourself a favor and pick up the Magpul Forward Sling Mount Mossberg 590, 590A1 Steel Black. You won’t be disappointed!