First Thoughts on the SLIP 2000 Carbon Killer 4 oz Squeeze Bottle
Carbon buildup. It’s the bane of every gun owner’s existence, a stubborn reminder of countless rounds sent downrange. The SLIP 2000 Carbon Killer 4 oz Squeeze Bottle promises to obliterate this problem with a simple soak, a proposition that immediately piqued my interest given my years wrestling with harsh solvents and tedious scrubbing. It’s a targeted carbon remover designed for internal metal parts, setting it apart from general-purpose cleaners.
My quest for the perfect carbon cleaner stems from years spent neglecting the deep cleaning of some of my firearms. I was lured by the claim that this product can remove even the most extreme baked-on carbon. I was tired of spending hours with bore brushes and solvents, only to still find remnants of carbon fouling.
Unboxing was straightforward: a no-frills squeeze bottle containing the carbon-dissolving elixir. The consistency seemed thin, almost watery, and the scent was less offensive than many bore solvents I’ve used, but still carried a chemical tang. I have a few similar products, like Hoppe’s No. 9 and CLP, but SLIP 2000 Carbon Killer differentiates itself by focusing solely on carbon removal through soaking.
My initial excitement was tempered with caution. SLIP 2000 clearly states this isn’t for exterior finishes, a warning I took seriously. I hoped this laser focus would translate to exceptional carbon-removing power, but I also knew aggressive solvents can sometimes cause more harm than good.
Real-World Testing: Putting SLIP 2000 Carbon Killer 4 oz Squeeze Bottle to the Test
First Use Experience
My primary test subject was a well-used AR-15 bolt carrier group (BCG) from a rifle that had seen a few thousand rounds without a thorough cleaning. Carbon was caked onto the bolt face, inside the carrier, and around the gas rings. I submerged the disassembled BCG components in a small container with SLIP 2000 Carbon Killer, ensuring all carbon-fouled areas were soaked.
I left the parts to soak for about 4 hours. The instructions didn’t specify an exact time, so I opted for a longer soak given the heavy carbon buildup. The temperature was moderate, around 70 degrees Fahrenheit in my garage. After the soak, I was pleasantly surprised.
The majority of the carbon simply wiped away with a rag, while a nylon brush easily dislodged the remainder. The initial use revealed impressive carbon dissolving power, saving considerable time and effort. I was surprised with just how easily everything came off after a long soak.
Extended Use & Reliability
Over the past few months, I’ve used SLIP 2000 Carbon Killer on several other firearms, including pistols and rifles. It continues to perform exceptionally well, consistently removing carbon buildup with minimal effort. The product hasn’t shown any signs of degrading or losing its effectiveness over time.
I haven’t noticed any negative effects on the metal parts of my firearms. I’ve kept a close eye out for discoloration or pitting, but everything appears to be in excellent condition. Maintenance is simple; rinse the parts with water and apply a quality gun oil or lubricant after cleaning.
Compared to my previous cleaning routine, which involved a combination of solvents, brushes, and elbow grease, SLIP 2000 Carbon Killer is a game-changer. It significantly reduces cleaning time and delivers superior results. This carbon cleaner definitely out performs my previous methods and products.
Breaking Down the Features of SLIP 2000 Carbon Killer 4 oz Squeeze Bottle
Specifications
- The SLIP 2000 Carbon Killer comes in a 4 oz squeeze bottle. This size is sufficient for multiple cleanings, depending on the size and number of parts being cleaned.
- It is specifically designed for soaking metal parts with baked-on carbon. This targeted approach ensures maximum effectiveness.
- The solution dissolves carbon and lead on contact. This reduces the need for aggressive scrubbing.
- It is intended for cleaning bores and internal metal gun parts only. Exterior use is strongly discouraged to prevent finish damage.
- The product’s aggressive formula is designed for extreme carbon removal. This delivers exceptional cleaning power.
Performance & Functionality
SLIP 2000 Carbon Killer excels at its primary function: removing stubborn carbon deposits. Its soak-and-wipe approach is far more effective than traditional scrubbing methods. I found it particularly useful for cleaning intricate parts like gas pistons and muzzle brakes.
The product’s strength is its ability to dissolve carbon without excessive scrubbing. One weakness is its limitation to metal parts, meaning other cleaners are needed for polymer frames or grips. It definitely met my expectations for a specialized carbon cleaner.
Design & Ergonomics
The squeeze bottle design is functional, allowing for controlled dispensing of the solution. While simple, it’s effective for directing the cleaner into small containers or directly onto parts. The bottle is lightweight and easy to handle.
The product itself requires no real ergonomic considerations; it’s all about the application process. The most important thing is to use appropriate personal protective equipment, like gloves, and ensure adequate ventilation. There’s virtually no learning curve involved with using this product.
Durability & Maintenance
The SLIP 2000 Carbon Killer itself is a chemical solution and doesn’t degrade unless contaminated. As long as the bottle is sealed and stored properly, it should last for a considerable time. The maintenance aspect relates to the firearms you’re cleaning, and this product excels at making that easier.
Accessories and Customization Options
The SLIP 2000 Carbon Killer doesn’t require any specific accessories, although a small container for soaking parts is essential. Nylon brushes and cleaning patches are also helpful for removing any remaining residue. Because it’s a cleaner, there are no “customization options.”
This product is compatible with a wide range of firearms, from pistols to rifles and shotguns. It’s important to always check the firearm manufacturer’s recommendations and test the product on a small, inconspicuous area before applying it to the entire surface.
Pros and Cons of SLIP 2000 Carbon Killer 4 oz Squeeze Bottle
Pros
- Exceptional carbon dissolving power.
- Reduces cleaning time significantly.
- Easy to use soak-and-wipe application.
- Safe for use on most internal metal gun parts.
- Small bottle size is convenient for storage.
Cons
- Not suitable for exterior finishes or polymer parts.
- Requires a separate cleaner for general firearm cleaning.
Who Should Buy SLIP 2000 Carbon Killer 4 oz Squeeze Bottle?
SLIP 2000 Carbon Killer is perfect for gun owners who frequently shoot high volumes of ammunition and struggle with stubborn carbon buildup. It’s also ideal for those who want to simplify their cleaning routine and reduce the amount of time spent scrubbing. Competitive shooters and firearm enthusiasts who prioritize meticulous maintenance will also appreciate the product’s effectiveness.
Individuals seeking a single, all-purpose cleaner for their entire firearm should skip this product. It is specifically designed for carbon removal on metal parts and shouldn’t be used on other surfaces. Those who are sensitive to chemical odors may want to consider other options or ensure adequate ventilation when using this product.
A must-have accessory is a small, sealable container for soaking parts. High-quality gun oil or lubricant is also essential for protecting the metal parts after cleaning. Using nylon brushes and cleaning patches will help ensure complete carbon removal.
Conclusion on SLIP 2000 Carbon Killer 4 oz Squeeze Bottle
The SLIP 2000 Carbon Killer 4 oz Squeeze Bottle is a specialized tool that excels at its intended purpose: dissolving stubborn carbon deposits from internal firearm components. Its ease of use and exceptional cleaning power make it a valuable addition to any gun owner’s cleaning kit.
The price of $10.49 is justified given the product’s effectiveness and time-saving benefits. While it’s not a replacement for a general-purpose cleaner, it’s a worthwhile investment for anyone who wants to make carbon removal quick and easy.
I would definitely recommend SLIP 2000 Carbon Killer to fellow gun owners who are tired of struggling with carbon buildup. Say goodbye to endless scrubbing and hello to a cleaner, better-performing firearm. Invest in the SLIP 2000 Carbon Killer 4 oz Squeeze Bottle today and experience the difference!