Let’s Talk About USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models
The USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models represents a practical solution for enhancing the versatility of your Trijicon 4×32 LED ACOG (TA02). It allows the user to co-witness a Trijicon RMR (Ruggedized Miniature Reflex) sight alongside the magnified optic, providing a quick transition between close-quarters and medium-range engagements. This mount, designed specifically for the ACOG, promises a seamless integration, a crucial element for maintaining accuracy and speed in dynamic shooting scenarios.
My journey to this mount began with a desire to improve my ACOG’s CQB capabilities. The ACOG, while superb at its intended range, always felt lacking when targets were closer than 25 yards. I was looking for a lightweight, reliable solution to bridge that gap without sacrificing the ACOG’s inherent strengths.
Upon receiving the USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models, my initial impression was one of rugged simplicity. The mount felt solid, built from what appeared to be high-quality aluminum. Its compact design suggested a minimal impact on the ACOG’s overall profile, a key concern.
I considered other options like offset mounts and even a completely separate red dot setup. However, the appeal of the RM66 was its direct integration and potential for a cleaner, more streamlined setup. The direct integration over an offset mount seemed inherently more stable, potentially reducing zeroing issues.
My first impression was cautiously optimistic. The mount felt well-made, but the proof would be in the installation and, ultimately, its performance in the field. I was eager to see if this mount could truly transform my ACOG into a more versatile optic.
Real-World Testing: Putting USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models to the Test
First Use Experience
My initial testing ground was a local shooting range, specifically designed for dynamic drills. I wanted to simulate rapid transitions between targets at varying distances. This mount allowed me to quickly acquire targets at 7 yards using the RMR and immediately engage targets at 100 yards through the ACOG.
The weather was slightly drizzly, adding a bit of slickness to the rifle’s handling. However, the mount itself performed admirably, holding the RMR securely and allowing for rapid sight acquisition. The transition between the magnified optic and the red dot was surprisingly intuitive, becoming second nature after a few drills.
Initially, I needed a few minutes to adjust my cheek weld to comfortably use both optics. Once dialed in, the process felt natural. The height-over-bore of the RMR did take some getting used to, especially at extremely close ranges.
The only initial issue was a slight loosening of the RMR screws after about 50 rounds. I attributed this to the “used” nature of the mount, and a quick application of Loctite solved the problem.
Extended Use & Reliability
After several weeks of use, including two weekend-long training courses, the USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models has proven its worth. The mount has held up exceptionally well, showing no further signs of loosening or shifting. It has been subjected to hundreds of rounds of .223 recoil.
The finish has proven quite durable, showing only minor scratches from rubbing against gear. Regular cleaning involves wiping down the mount with a lightly oiled cloth. This is simple enough. I’ve found keeping the threads clean to be essential for retaining torque on the mounting screws.
Compared to my previous attempts to use an offset red dot, this mount has been a revelation. The direct integration provides a much more stable platform. This has resulted in more consistent accuracy and faster target acquisition.
Breaking Down the Features of USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models
Specifications
The USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models is designed specifically to attach a Trijicon RMR to the top of a Trijicon 4×32 LED ACOG (TA02) housing. It is constructed from aircraft-grade aluminum, ensuring a strong and lightweight platform. Weighing in at a mere 0.60 oz (17g), it adds negligible weight to the overall optic setup.
These specifications are crucial because they directly impact the mount’s ability to provide a stable and reliable platform without adding unnecessary bulk. The aluminum construction guarantees durability, while the lightweight design preserves the ACOG’s balance and handling characteristics. The precise fit ensures proper alignment with the RMR, contributing to consistent zeroing and accuracy.
Performance & Functionality
The USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models excels at its primary function: providing a secure and stable platform for an RMR sight. It allows for quick transitions between the magnified ACOG optic and the unmagnified RMR. This is ideal for engaging targets at varying distances.
The mount’s strength lies in its simplicity and direct integration. Its weaknesses are few, primarily related to potential height-over-bore issues at extremely close ranges. It meets my expectations for reliability and functionality, transforming the ACOG into a truly versatile optic.
Design & Ergonomics
The mount’s design is clean and functional. The aircraft-grade aluminum build feels robust and well-finished. While a “used” model may show minor cosmetic wear, the overall structural integrity remains intact.
The mount adds minimal bulk to the ACOG, preserving its ergonomics and balance. There is virtually no learning curve involved in using the mount itself, although adjusting to the RMR’s height-over-bore may require some familiarization.
Durability & Maintenance
Given its construction from aircraft-grade aluminum, the USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models is expected to last for many years with proper care. Signs of wear should be primarily cosmetic. The unit tested is used, therefore, it had minor wear, but was still mechanically sound.
Maintenance is straightforward, requiring only occasional cleaning with a soft cloth and light oil. Inspecting and tightening the mounting screws periodically is recommended to ensure optimal performance.
Accessories and Customization Options
The USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models does not come with any additional accessories beyond the mounting hardware itself. Its primary customization option is the choice of RMR sight to be mounted. It is designed specifically for Trijicon RMR sights, although some other micro red dots with a compatible footprint may also work.
While it doesn’t offer extensive customization options, its compatibility with the widely popular Trijicon RMR makes it a versatile choice. The user can choose from various RMR models with different reticle options and features to suit their specific needs. Remember to verify screw lengths if you diverge from the Trijicon RMR, as damaging the RMR internals is possible with screws that are too long.
Pros and Cons of USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models
Pros
- Provides a stable and secure platform for Trijicon RMR sights.
- Enables rapid transitions between magnified ACOG and unmagnified RMR optics.
- Lightweight design adds minimal bulk to the overall optic setup.
- Durable aircraft-grade aluminum construction ensures long-lasting performance.
- Simple and easy to install and maintain.
Cons
- Adds height-over-bore to the RMR, which may require some adjustment at close ranges.
- Designed primarily for Trijicon RMR sights, limiting compatibility with other red dot options.
Who Should Buy USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models?
The USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models is perfect for tactical shooters, law enforcement professionals, and anyone who relies on a Trijicon 4×32 LED ACOG for medium-range engagements but also needs a quick solution for close-quarters combat. It’s ideal for individuals who prioritize versatility and rapid target acquisition in dynamic shooting scenarios.
This product might not be the best choice for individuals who primarily engage targets at longer ranges and rarely need a close-quarters optic. Also, if you prefer using a completely separate red dot setup or an offset mount, this integrated solution may not be the right fit.
A must-have accessory is a high-quality Trijicon RMR sight to pair with the mount. Consider a model with adjustable brightness settings and a reticle that suits your specific shooting needs. As mentioned, Loctite is a strong suggestion as well to ensure mounting screw retention.
Conclusion on USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models
The USED, Trijicon RMR Mount for 4×32 LED ACOG RM66 – 1 out of 3 models is a worthwhile investment for anyone looking to enhance the versatility of their Trijicon 4×32 LED ACOG. It provides a stable and reliable platform for an RMR sight, allowing for rapid transitions between magnified and unmagnified optics. While the height-over-bore may require some adjustment, the overall benefits of this integrated solution far outweigh the drawbacks.
At $57.99, the price is justified, particularly considering the high-quality construction and the enhanced functionality it provides. A new mount costs considerably more, so if you can find one in good working order, as I did, purchasing used is a no brainer. This mount significantly increases the usability of the ACOG in a variety of scenarios.
I would personally recommend this mount to anyone seeking a reliable and efficient way to add close-quarters capabilities to their ACOG. Don’t hesitate – upgrade your ACOG today and experience the enhanced versatility for yourself!