Let’s Dive into Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067
The Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067 is a reloading die designed to improve the consistency and accuracy of your reloaded ammunition. Manufactured by Lee Precision, this die aims to address issues such as bullet setback and inconsistent crimps, particularly important for cartridges used in revolvers and some semi-automatic pistols.
I started reloading the .32 S&W Long and .32 H&R Magnum cartridges a few years back to save money and tailor loads to my vintage revolvers. I quickly discovered that achieving consistent crimps was difficult, leading to varying velocities and accuracy. The Lee Factory Crimp Die seemed like a potential solution to improve my reloading process.
Upon unboxing, the die appeared well-made and robust, constructed from high-quality steel. The design was simple and intuitive, with a clear adjusting screw for setting the crimp pressure. It felt solid and well-machined, instilling confidence in its ability to perform as advertised.
Compared to standard roll crimp dies, the Lee Factory Crimp Die stands out due to its unique design. It post-sizes the cartridge while applying the crimp, ensuring a more uniform bullet seating depth and neck tension. I chose this die over standard crimp dies hoping to improve consistency and eliminate bullet setback in my .32 caliber reloads.
My first impression was one of cautious optimism. I was excited to see if this die could truly make a difference in my reloading process, but I also remained skeptical of any “magic bullet” solutions. The design seemed promising, but the proof would be in the performance.
Real-World Testing: Putting Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067 to the Test
First Use Experience
I tested the Lee Factory Crimp Pistol Die at my reloading bench, loading batches of .32 S&W Long and .32 H&R Magnum cartridges. I used a variety of bullets and powder charges to assess the die’s performance across different load combinations. The goal was to measure the velocity consistency of my reloads.
The die performed well in different conditions. It was relatively straightforward to set up and adjust, and the crimping action felt smooth and consistent. Even when working with slightly over-expanded cases, the crimp was effective.
The ease of use was a definite plus. It only took a few minutes to understand the die’s operation, and the adjusting screw made it easy to fine-tune the crimp pressure. I experienced no issues with setup or adjustment.
After the first use, I was impressed by the improvement in crimp uniformity. The Lee Factory Crimp Die produced consistent and tight crimps. The reloaded rounds felt more solid and professional compared to those crimped with a standard roll crimp die.
Extended Use & Reliability
After several months of using the Lee Factory Crimp Pistol Die, it has held up remarkably well. I’ve loaded thousands of rounds with it, and the die still performs flawlessly. It has become an indispensable part of my reloading process.
The die shows no signs of wear and tear. The steel construction is durable, and the moving parts operate smoothly. I expect this die to last for many years of use.
Maintenance is simple. I occasionally clean the die with a brush and solvent to remove any accumulated powder residue. This ensures smooth operation and prevents any potential corrosion.
The Lee Factory Crimp Pistol Die has significantly outperformed my previous crimping methods. It has improved the consistency and accuracy of my .32 caliber reloads, and it has eliminated the issue of bullet setback. I would highly recommend this die to any reloader.
Breaking Down the Features of Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067
Specifications
- The Lee Factory Crimp Pistol Die is specifically designed for use with .32 S&W Long and .32 H&R Magnum cartridges. This ensures proper fit and function.
- The die is made from high-quality steel, providing durability and longevity. This ensures it can withstand the pressure of repeated use.
- It features an adjusting screw that allows for precise control over the crimp pressure. This lets the user tailor the crimp to their specific needs.
- The die simultaneously sizes the cartridge while crimping, ensuring proper bullet seating depth and neck tension. This promotes consistent ammunition performance.
- It uses a collet-style crimping mechanism. This provides a uniform crimp around the entire circumference of the bullet.
These specifications matter because they directly impact the consistency and accuracy of reloaded ammunition. The precise crimp pressure, cartridge sizing, and uniform crimp all contribute to improved bullet seating and consistent velocities. This ultimately translates to better accuracy and reliability on the range.
Performance & Functionality
The Lee Factory Crimp Pistol Die performs its job exceptionally well. It produces consistent, reliable crimps that improve the overall quality of reloaded ammunition. This results in improved accuracy and reduced bullet setback.
The strengths include its ease of use, consistent crimping action, and the elimination of bullet setback. The weakness is that it may not be necessary for experienced reloaders.
The die meets and exceeds expectations. I was initially skeptical, but the improved consistency and accuracy of my reloads have made me a believer.
Design & Ergonomics
The build quality is excellent. The steel construction feels solid and durable.
The die is user-friendly. The adjusting screw allows for easy fine-tuning of the crimp pressure. There’s virtually no learning curve.
Durability & Maintenance
The die is built to last. The steel construction can withstand thousands of rounds.
It’s easy to maintain and repair. Simple cleaning with a brush and solvent is all that’s required. Replacement parts are readily available from Lee Precision.
Accessories and Customization Options
The Lee Factory Crimp Pistol Die does not come with many accessories. It’s a self-contained unit.
There are no significant customization options available. The die is designed to perform a specific function. It’s primarily compatible with Lee reloading presses.
Pros and Cons of Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067
Pros
- Improved Crimp Consistency: Delivers highly consistent crimps, leading to better accuracy.
- Reduces Bullet Setback: Effectively prevents bullet setback in reloaded ammunition.
- Easy to Use: Simple and intuitive design with an easy-to-adjust crimp pressure screw.
- Durable Construction: Made from high-quality steel for long-lasting performance.
- Affordable Price: Provides excellent value for the money.
Cons
- Cartridge Specific: Only works with .32 S&W Long and .32 H&R Magnum cartridges.
- May Not Be Necessary for All: Experienced reloaders may already achieve satisfactory results with standard crimping methods.
Who Should Buy Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067?
The Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067 is perfect for reloaders seeking improved consistency and accuracy in their .32 caliber reloads. It is also great for those struggling with bullet setback issues.
Those who should skip this product are experienced reloaders already achieving satisfactory results. If your reloads are already performing well, this die may not offer significant benefits.
A must-have accessory is a quality reloading press. The Lee Factory Crimp Pistol Die is designed to work with standard reloading presses. Proper dies for case preparation are also required.
Conclusion on Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067
The Lee Factory Crimp Pistol Die For 32 Smith & Wesson/32 H&R 90067 is an excellent addition to any reloader’s arsenal. It offers a simple, effective, and affordable way to improve the consistency and accuracy of .32 caliber reloads.
The price is definitely justified, considering the performance improvements and the elimination of bullet setback. For around $33, the value is excellent.
I would personally recommend it to anyone who reloads .32 S&W Long or .32 H&R Magnum cartridges. The Lee Factory Crimp Pistol Die can improve the quality of your ammunition.
If you’re looking to take your .32 caliber reloads to the next level, grab the Lee Factory Crimp Pistol Die today and experience the difference!