Let’s Dive into Mec Gunsmith And Reloading Equipment 21
The Mec Gunsmith And Reloading Equipment 21, specifically the Mayville #21 Powder Bushing from MEC, is a small but vital component for shotgun reloaders. It promises precision and consistency in powder dispensing, a critical factor in achieving accurate and safe shotgun loads. The world of reloading can seem daunting at first, filled with complex calculations and potentially dangerous consequences if not done correctly.
I was looking for a bushing that would allow me to fine-tune my powder loads for sporting clays. Accuracy and consistency are paramount when trying to break those challenging targets. My initial thought was simply, “Will this tiny piece of aluminum make a difference?”
Upon receiving the Mec Gunsmith And Reloading Equipment 21, I was immediately struck by its simplicity. It’s a small, precisely machined aluminum piece, lightweight yet seemingly robust. Compared to adjustable powder measures, which offer flexibility but can sometimes be inconsistent, this bushing offers a fixed volume approach.
I considered adjustable powder bars from other manufacturers, but I prefer the simplicity and repeatability of bushings for my target loads. My first impression was cautiously optimistic; it looked like it would do the job, but the proof would be in the testing.
Real-World Testing: Putting Mec Gunsmith And Reloading Equipment 21 to the Test
First Use Experience
My first test of the Mec Gunsmith And Reloading Equipment 21 was at my local shooting range, a familiar environment where I could focus on the consistency of my reloads. I loaded a series of shells with the bushing, carefully weighing each charge to verify its accuracy against the reloading manual’s data. The conditions were typical for a summer afternoon – warm and slightly humid.
The bushing performed smoothly within my MEC reloader. The powder charges it dispensed were remarkably consistent, within a tenth of a grain of my target weight, which significantly reduced the variance I was experiencing previously. I didn’t encounter any issues or surprises, which is precisely what I was hoping for.
Extended Use & Reliability
After several weeks of regular use, reloading hundreds of shotgun shells, the Mec Gunsmith And Reloading Equipment 21 continues to perform flawlessly. I haven’t observed any signs of wear or degradation in its performance. Cleaning is straightforward; a simple wipe-down keeps it free of powder residue.
Compared to my previous attempts using an adjustable charge bar, the Mec Gunsmith And Reloading Equipment 21 provides significantly greater consistency. This has translated into tighter patterns on the sporting clays course, a testament to the precision it delivers. It definitely outperforms my previous setup.
Breaking Down the Features of Mec Gunsmith And Reloading Equipment 21
Specifications
The Mec Gunsmith And Reloading Equipment 21 (Mayville #21 Powder Bushing) boasts the following specifications:
- Manufacturer: MEC
- Quantity: 1
- Additional Feature: Powder Bushing
- Fabric/Material: Aluminum
- Gun Type: Shotgun
These specifications are critical for a couple of reasons. The aluminum construction ensures durability and resistance to corrosion, essential for a component that comes into constant contact with gunpowder. Its precise dimensions, signified by the “#21” designation, dictate the volume of powder dispensed, influencing the velocity and pressure of the shotgun shell.
Performance & Functionality
The primary function of the Mec Gunsmith And Reloading Equipment 21 is to accurately dispense a pre-determined volume of gunpowder. In my experience, it performs this task admirably, providing consistent charges that contribute to reliable and predictable shotgun loads. The bushing is exceptionally precise for its intended purpose.
The strength lies in its simplicity and consistency, while a potential weakness could be the lack of adjustability, requiring multiple bushings for different loads. It meets my expectations, delivering reliable powder dispensing for consistent loads.
Design & Ergonomics
The Mec Gunsmith And Reloading Equipment 21 features a simple, cylindrical design. The aluminum material is lightweight, contributing to ease of handling during the reloading process. Its compact size ensures seamless integration with MEC reloading presses.
The design is user-friendly, requiring no adjustments or complicated setup procedures. There’s no learning curve; it’s simply insert and reload.
Durability & Maintenance
The aluminum construction suggests a long lifespan under normal reloading conditions. It’s resistant to corrosion and general wear. Maintenance is minimal; a quick wipe with a dry cloth after each reloading session is typically sufficient.
Given its robust construction and simple design, I expect the Mec Gunsmith And Reloading Equipment 21 to last for years with proper care. It’s easy to clean and requires no special tools for maintenance.
Accessories and Customization Options
The Mec Gunsmith And Reloading Equipment 21 itself doesn’t have accessories. However, it’s part of a larger reloading system and relies on the reloader for operation. Customization comes in the form of purchasing different numbered bushings to achieve various powder loads, allowing reloaders to tailor their ammunition to specific needs.
The Mec Gunsmith And Reloading Equipment 21 is fully compatible with all MEC reloading presses designed for shotshell reloading. While other manufacturers may offer similar bushings, compatibility is generally limited to their respective reloading machines.
Pros and Cons of Mec Gunsmith And Reloading Equipment 21
Pros
- Highly consistent powder dispensing for accurate loads.
- Simple and easy to use, with no complex adjustments.
- Durable aluminum construction for long-lasting performance.
- Affordable solution for consistent powder measurement.
- Directly compatible with MEC reloaders, ensuring seamless integration.
Cons
- Requires purchasing multiple bushings for different powder loads.
- Not adjustable, which limits flexibility compared to powder measures.
Who Should Buy Mec Gunsmith And Reloading Equipment 21?
The Mec Gunsmith And Reloading Equipment 21 is perfect for shotgun reloaders focused on achieving consistent and accurate loads, especially for target shooting or hunting where precision is paramount. It’s ideal for those who prefer a simple, reliable solution over adjustable powder measures. Experienced reloaders focused on consistency for known loads will benefit the most.
Those who frequently experiment with different powder loads or need the flexibility of on-the-fly adjustments might find the fixed nature of the Mec Gunsmith And Reloading Equipment 21 limiting. They might be better served by an adjustable powder measure. A powder scale for verification is a must-have accessory to ensure charge accuracy.
Conclusion on Mec Gunsmith And Reloading Equipment 21
The Mec Gunsmith And Reloading Equipment 21 offers a straightforward and reliable solution for achieving consistent powder charges in shotgun reloading. Its simplicity and durable aluminum construction make it a valuable addition to any reloader’s bench. The price is definitely justified by the consistency and reliability it provides.
I would definitely recommend the Mec Gunsmith And Reloading Equipment 21 to anyone seeking a simple and consistent method for dispensing powder in their shotgun reloads. If you value accuracy and consistency, this little bushing is a game-changer. Get yours today and start loading with confidence!