Mec Gunsmith And Reloading Equipment 35 Review

Let’s Dive into Mec Gunsmith And Reloading Equipment 35

The Mec Gunsmith And Reloading Equipment 35, more specifically the Mec #35 Powder Bushing, is a seemingly simple but crucial component for any shotgun reloader using a Mec reloading press. It’s designed to dispense a specific volume of powder, directly impacting the consistency and accuracy of your reloads. It’s a small, unassuming piece of aluminum, but it plays a vital role in the reloading process, and choosing the right bushing is paramount to achieving your desired loads.

My journey to this particular bushing began with a quest for consistent 12-gauge target loads. I was experiencing inconsistencies in my powder drops using an older, worn-out bushing, leading to frustrating variations in velocity and patterns. I was looking for a reliable, precisely manufactured bushing that would give me the confidence to load consistent, accurate shotshells for trap and skeet.

Upon receiving the Mec Gunsmith And Reloading Equipment 35, my initial impression was one of solid, functional simplicity. The aluminum construction felt robust, and the machining appeared clean and precise. It was significantly lighter than my old steel bushing, but that wasn’t necessarily a bad thing, as long as it proved durable.

Comparing it to a Lee Precision powder dipper and a Hornady powder measure, the Mec bushing offers a different level of convenience and precision for shotgun reloading. The Lee dipper is cheap and cheerful but lacks precision, while the Hornady measure is designed for rifle and pistol powders. I chose the Mec bushing specifically because it is designed for use in a Mec shotshell reloader.

My first impression was cautiously optimistic. I knew the reputation of Mec for producing quality reloading equipment, and the bushing seemed well-made. The real test would be how it performed in my press, and whether it delivered consistent powder drops.

Check Best Price HERE

Real-World Testing: Putting Mec Gunsmith And Reloading Equipment 35 to the Test

First Use Experience

I tested the Mec Gunsmith And Reloading Equipment 35 at my reloading bench, which is located in my garage. Ambient conditions were about 70 degrees Fahrenheit and relatively dry, which is pretty standard for my setup. I was reloading 12-gauge shells with Red Dot powder for target shooting.

The bushing performed exceptionally well right from the start. Powder drops were consistent and within the range specified in my reloading manual. I didn’t experience any bridging or clumping of the powder, even after several hundred rounds.

The ease of use was a pleasant surprise; I simply installed it in my Mec reloader, adjusted the powder charge slightly, and started loading. There was no need to “break it in” or make any special adjustments. The Mec Gunsmith And Reloading Equipment 35 was a drop-in replacement for my old bushing.

There were no issues after the first use; it worked as expected and improved the consistency of my reloads. I was already impressed with the performance.

Extended Use & Reliability

After several months of reloading, the Mec Gunsmith And Reloading Equipment 35 has held up remarkably well. It continues to deliver consistent powder drops, and I haven’t noticed any degradation in performance. I’ve loaded thousands of rounds using this bushing, and it still performs like new.

Durability has proven to be excellent. Despite being made of aluminum, the bushing shows no signs of wear and tear. There are no scratches, dents, or other damage.

Maintenance is virtually nonexistent. I simply wipe the bushing clean with a dry cloth after each reloading session. There’s no need for any special cleaners or lubricants.

Compared to my previous experiences with other powder dispensing methods, the Mec Gunsmith And Reloading Equipment 35 is a significant improvement. It offers both convenience and consistency, making reloading a much more enjoyable and efficient process. It vastly outperforms manual powder dipping and is far more consistent than cheaper adjustable powder measures.

Breaking Down the Features of Mec Gunsmith And Reloading Equipment 35

Specifications

The Mec Gunsmith And Reloading Equipment 35 is an aluminum powder bushing designed for use in Mec shotshell reloading presses. The “35” designation refers to its internal diameter, which determines the volume of powder it dispenses. It’s crucial to consult a reloading manual to determine the appropriate bushing size for your desired load.

• Manufacturer: MEC
• Quantity: 1
• Additional Features: Powder Bushing
• Fabric/Material: Aluminum
• Gun Type: Shotgun

The aluminum construction keeps the bushing lightweight and resistant to corrosion. The precise machining ensures consistent powder drops, which is critical for accuracy and safety. The simple design makes it easy to install and use.

Performance & Functionality

The Mec Gunsmith And Reloading Equipment 35 performs its job flawlessly: dispensing a consistent volume of powder. It’s accurate, reliable, and easy to use. The bushing is designed to work seamlessly with Mec reloaders.

The strength of the Mec Gunsmith And Reloading Equipment 35 lies in its simplicity and precision. Its one weakness is that it’s only suitable for Mec reloading presses. The Mec Gunsmith And Reloading Equipment 35 meets and exceeds my expectations.

Design & Ergonomics

The Mec Gunsmith And Reloading Equipment 35 is a simple, functional design. The aluminum is lightweight and easy to handle. It’s comfortable to install and remove from the reloader.

The Mec Gunsmith And Reloading Equipment 35 is extremely user-friendly. No learning curve is involved, simply install and use.

Durability & Maintenance

The Mec Gunsmith And Reloading Equipment 35, given its aluminum construction and simple design, should last for many years with proper care. It’s easy to maintain and repair.

Simply wipe it clean after use. If it becomes excessively dirty, use a mild solvent to clean it.

Accessories and Customization Options

The Mec Gunsmith And Reloading Equipment 35 does not come with any accessories, as it is a single, self-contained component. There are no customization options for the Mec Gunsmith And Reloading Equipment 35 itself, but it’s compatible with a wide range of Mec reloading presses and powder types. The key customization is selecting the correct bushing size for your specific load.

Pros and Cons of Mec Gunsmith And Reloading Equipment 35

Check Best Price HERE

Who Should Buy Mec Gunsmith And Reloading Equipment 35?

The Mec Gunsmith And Reloading Equipment 35 is perfect for shotgun reloaders who use Mec presses and are looking for consistent and accurate powder drops. This includes target shooters, hunters, and anyone who reloads shotshells in quantity.

Anyone who doesn’t own a Mec reloading press or prefers to use adjustable powder measures should skip this product. Also, if you only reload a few shells occasionally, the investment in multiple bushings might not be worthwhile.

A good reloading manual is a must-have accessory to ensure you choose the correct bushing size for your desired load. A powder scale is also recommended to verify the accuracy of the powder drops.

Conclusion on Mec Gunsmith And Reloading Equipment 35

Overall, the Mec Gunsmith And Reloading Equipment 35 is an excellent product that delivers on its promise of consistent and accurate powder drops. It’s a simple but essential component for any shotgun reloader using a Mec press.

At $8.49, the price is certainly justified. It’s an inexpensive way to significantly improve the quality and consistency of your reloads.

I would definitely recommend the Mec Gunsmith And Reloading Equipment 35 to any shotgun reloader using a Mec press. It’s a worthwhile investment that will pay for itself in improved accuracy and reduced wasted components. So, if you’re looking to up your reloading game, grab the correct sized Mec Gunsmith And Reloading Equipment 35 powder bushing, consult your manual, and start loading with confidence!