Trijicon 1in Scope Tube RMR Mount Review

Let’s Dive into Trijicon 1in Scope Tube RMR Mount

The Trijicon 1in Scope Tube RMR Mount is designed to offer shooters a streamlined method of adding a red dot sight to their existing riflescope setup. This mount promises to provide a secondary sighting system for rapid target acquisition at close ranges without sacrificing the magnification benefits of a traditional scope.

I initially sought out this product because I was looking for a way to add a fast, close-quarters sighting option to my hunting rifle without needing to purchase a completely new optic or rifle. The allure of maintaining my scope’s magnification for longer shots while having an RMR readily available for closer, reactionary shots was appealing.

Upon unboxing, I immediately noticed the mount’s simple yet robust design. It felt solid in hand, crafted from what appeared to be quality aluminum. Comparing it to similar offset mounts or dedicated red dot setups, I chose the Trijicon due to their reputation for durability and the promise of a more integrated, streamlined profile.

My first impression was cautiously optimistic; the build quality seemed promising, but I had some concerns about the potential height over bore and its impact on cheek weld.

Check Best Price HERE

Real-World Testing: Putting Trijicon 1in Scope Tube RMR Mount to the Test

First Use Experience

I tested the Trijicon 1in Scope Tube RMR Mount at my local shooting range on a 3-gun style setup, running drills that transitioned from longer-range targets at 100 yards down to close-quarters targets within 25 yards. The weather was sunny and clear.

The mount initially felt a bit awkward. It took some getting used to transitioning between the scope and the RMR. Unfortunately, one of the immediate issues was the height over bore, which required me to significantly lift my head off the stock to acquire the RMR’s red dot.

After the first few uses, I realized that mounting this system would require considerable adjustment to my shooting style and equipment.

Extended Use & Reliability

After several weeks of using the Trijicon 1in Scope Tube RMR Mount during practice sessions, I can say that the durability is commendable. The mount itself shows no signs of wear and tear and remains firmly attached to the scope.

However, the fundamental issues with the height over bore and the limited mounting positions haven’t improved, even with extended use. Cleaning is straightforward, requiring only a quick wipe-down with a microfiber cloth to remove any residue. Compared to other secondary optic solutions I’ve used, this mount has not lived up to my initial expectations due to the ergonomic challenges it presents.

Breaking Down the Features of Trijicon 1in Scope Tube RMR Mount

Specifications

The Trijicon 1in Scope Tube RMR Mount is designed specifically for mounting a Trijicon RMR (Ruggedized Miniature Reflex) sight onto a riflescope with a 1-inch tube diameter. It is constructed from aircraft-grade aluminum and features a matte black finish.

The mount weighs a mere 1.8 oz (52g), adding minimal weight to the overall rifle setup. It is compatible with all 3-9×40 Trijicon AccuPoint Rifle Scope models. These specifications highlight its lightweight construction and targeted compatibility, which aims for minimal impact on the rifle’s balance and ergonomics.

Performance & Functionality

The primary function of the Trijicon 1in Scope Tube RMR Mount is to provide a secure and stable platform for an RMR sight. However, the performance is hampered by its design. The height over bore significantly impacts the speed and ease of target acquisition.

The mount’s biggest strength is its rock-solid construction, ensuring the RMR remains zeroed even after sustained use. Its weakness lies in the ergonomics and limited mounting options, which can make it difficult to find an optimal position that doesn’t compromise cheek weld or eye relief. It partially meets expectations regarding durability but falls short in practical usability.

Design & Ergonomics

The Trijicon 1in Scope Tube RMR Mount features a simple, low-profile design. It is built from aircraft-grade aluminum, providing a balance of strength and weight.

While the build quality is excellent, the ergonomics leave much to be desired. The high mounting position creates a noticeable learning curve, forcing the shooter to adapt their technique to compensate for the altered cheek weld.

Durability & Maintenance

The aircraft-grade aluminum construction suggests excellent long-term durability. With proper care, the mount should withstand years of use without significant wear or degradation.

Maintenance is minimal, requiring only occasional cleaning to remove dirt and debris. The mount’s simple design also ensures there are no small parts that could easily break or require frequent replacement.

Accessories and Customization Options

The Trijicon 1in Scope Tube RMR Mount itself doesn’t come with any additional accessories beyond the necessary mounting hardware. The primary customization option is the choice of RMR sight to mount on it.

While the mount is designed for Trijicon RMRs, it may be compatible with other red dot sights that share the same footprint. Users may also explore different scope ring configurations to fine-tune the mount’s position along the scope tube. Be sure to use bold and italic text where necessary to emphasize important points.

Pros and Cons of Trijicon 1in Scope Tube RMR Mount

Check Best Price HERE

Who Should Buy Trijicon 1in Scope Tube RMR Mount?

The Trijicon 1in Scope Tube RMR Mount might be perfect for shooters who already own a 3-9×40 Trijicon AccuPoint scope and are looking for a simple way to add a red dot without replacing their entire optic system. It could also appeal to recreational shooters who prioritize durability and a minimalist setup.

However, this product should be skipped by those who prioritize ergonomics and a comfortable cheek weld. It’s also not suitable for shooters who need a versatile mounting solution for different types of rifles or scopes. A must-have modification might involve experimenting with different cheek risers to compensate for the high mounting position.

Conclusion on Trijicon 1in Scope Tube RMR Mount

The Trijicon 1in Scope Tube RMR Mount presents a mixed bag of features and shortcomings. While its durability and lightweight design are commendable, the ergonomic challenges and limited mounting options ultimately detract from its overall value.

At a price of $119.49, the value proposition is questionable, especially considering the compromises in comfort and usability. I would personally hesitate to recommend it, unless the user is fully aware of its limitations and willing to adapt their shooting style accordingly.

Final thoughts: Consider alternatives like offset mounts or dedicated red dot setups before committing to this product, as they may offer a more user-friendly and versatile solution.