First Thoughts on the HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE
The HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE promises to deliver superior performance with high-density loads in your Beretta or Benelli shotgun. Manufactured by HSP, this choke tube aims to provide super full choke patterns, specifically optimized for loads like Hevi-Shot, bismuth, and tungsten. The promise of a tighter pattern with these specialized loads immediately piqued my interest, as I’ve struggled in the past with achieving consistent patterns on waterfowl and turkey hunts.
For years, I’ve relied on standard, off-the-shelf choke tubes for my Beretta and Benelli shotguns. I was perpetually frustrated by inconsistent patterns, especially when switching to non-toxic shot required by law in many waterfowl hunting areas. This led me to research choke tubes specifically designed for high-density loads.
Upon unboxing, the HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE felt solid and well-made. The blued finish looked clean, and the knurled exterior gave a reassuring grip. Its 3-inch length seemed standard, and the threads appeared precisely cut.
Compared to my factory Beretta choke tubes and a Briley extended choke, the HSP UNDERTAKER felt noticeably denser. I chose the HSP UNDERTAKER over a Patternmaster or a Carlson’s choke primarily due to its targeted design for high-density loads and its attractive price point. The others seemed more like all-purpose solutions, while I needed a specialist for the demanding non-toxic shot.
My initial impression was one of cautious optimism. I was excited to test its performance with Hevi-Shot and other tungsten-based loads, but also a little apprehensive about whether it could truly live up to the claims of super full choke patterns. Only time and testing would tell.
Real-World Testing: Putting HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE to the Test
First Use Experience
My first experience with the HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE was at a local shooting range, specifically patterned for turkey loads. I tested it with a Benelli Nova, using 3-inch Hevi-Shot #6 shot. The weather was clear and mild, around 60 degrees Fahrenheit, providing ideal conditions for patterning.
The HSP UNDERTAKER was incredibly easy to install and remove, thanks to the knurled exterior. It didn’t require any special tools or excessive force. After a few shots, I was already impressed by the tighter pattern compared to my previous choke tubes. I noted a denser core with fewer stray pellets at 40 yards.
The only initial issue I encountered was that the choke seemed to collect a little more residue from the Hevi-Shot loads than my other tubes. This required a slightly more thorough cleaning after the range session.
Extended Use & Reliability
After several weeks and multiple range trips, the HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE has proven to be a reliable performer. It has consistently delivered tight, dense patterns with various high-density loads, including Hevi-Shot, Federal TSS, and Winchester Long Beard XR. I also used it on a waterfowl hunt in cold, wet conditions.
The choke tube shows minimal signs of wear and tear, even after repeated use and cleaning. The blued finish remains intact, and the threads are still smooth. Cleaning the HSP UNDERTAKER after each use is essential to maintain its performance, as the high-density loads tend to leave more residue than lead shot. I use a standard choke tube cleaner and a bronze brush.
Compared to my previous experiences with factory choke tubes, the HSP UNDERTAKER significantly outperforms them in terms of pattern density and consistency with high-density loads. It gives me the confidence to take longer shots with a higher probability of success.
Breaking Down the Features of HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE
Specifications
The HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE is designed specifically for 12-gauge Beretta Mobilchoke and Benelli Crio/Crio Plus threaded shotguns (as well as Franchi, Traditions ALS 2100, Stoeger and Gazelle Series). It is intended for 2-3/4″, 3″ and 3-1/2″ shells. The tube is constructed from 41L42 chrome-moly, aircraft quality alloy. It has a blued finish.
The 3-inch length provides sufficient internal surface area for optimal shot constriction and pattern formation. The use of 41L42 chrome-moly steel ensures that the tube can withstand the pressures and abrasiveness of high-density loads. The Super Full choke constriction results in tighter patterns at longer ranges, essential for ethical hunting.
Performance & Functionality
The HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE excels at its primary task: delivering tight, consistent patterns with high-density loads. It significantly improves the effective range of my shotgun. Its super full choke is optimized for turkey hunting and waterfowl hunting where longer shots are common.
The main strength of this choke tube is its ability to maximize the performance of expensive, high-density shot. A potential weakness is that it may produce patterns that are too tight at close ranges, making it less forgiving on quick, close-quarters shots. It absolutely meets my expectations for a dedicated high-density choke tube, providing consistent patterns out to 50 yards with appropriate loads.
Design & Ergonomics
The build quality of the HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE is solid and functional. The materials used are durable, and the overall design is simple and effective. It’s easy to install and remove, thanks to the knurled exterior, even with gloved hands.
The choke tube is relatively lightweight and doesn’t significantly alter the balance of the shotgun. There is virtually no learning curve; just screw it in and pattern it.
Durability & Maintenance
The HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE is built to last. The 41L42 chrome-moly alloy is resistant to wear and corrosion. Regular cleaning is essential to prevent the buildup of residue from high-density loads, which can affect performance over time.
Repairing a choke tube is not generally feasible. However, with proper care and maintenance, the HSP UNDERTAKER should provide years of reliable service.
Accessories and Customization Options
The HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE doesn’t come with any accessories. Customization options are limited to potentially having it Cerakoted for a different finish, though this is purely cosmetic. It is compatible with any standard choke tube wrench designed for Beretta Mobilchoke or Benelli Crio/Crio Plus systems, which are readily available from various brands.
Pros and Cons of HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE
Pros
- Delivers exceptionally tight patterns with high-density loads, extending effective range.
- Constructed from durable 41L42 chrome-moly alloy, ensuring longevity.
- Easy to install and remove thanks to the knurled exterior.
- Significantly more affordable than many other high-density choke tubes on the market.
- Compatible with a wide range of Beretta and Benelli shotguns using Mobilchoke and Crio/Crio Plus systems.
Cons
- Patterns may be too tight for close-range shots, requiring careful consideration of hunting scenarios.
- Requires regular and thorough cleaning to prevent residue buildup from high-density loads.
Who Should Buy HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE?
The HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE is perfect for hunters, especially turkey and waterfowl hunters, who use high-density loads and need to maximize their effective range. It is ideal for those who own Beretta or Benelli shotguns with Mobilchoke or Crio/Crio Plus systems and are looking for an affordable, high-performing choke tube. Also, budget-conscious shooters needing performance on a dime will find this to be their go-to choke!
This product is not ideal for shooters who primarily hunt in close-quarters situations where a wider pattern is preferable. Those who are unwilling to regularly clean their choke tubes should also avoid this product. A must-have accessory is a dedicated choke tube wrench for easy installation and removal.
Conclusion on HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE
The HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE is an impressive choke tube that delivers on its promise of tight, consistent patterns with high-density loads. Its durable construction, easy installation, and affordable price make it a standout option for hunters looking to improve their shotgun’s performance. The price is absolutely justified, considering the improvement in pattern density and effective range it provides.
I would wholeheartedly recommend the HSP UNDERTAKER to any hunter using a compatible shotgun and high-density ammunition. If you are tired of inconsistent patterns and want to extend your effective range, give the HSP UNDERTAKER HS 12GA BER BEN CHOKE TUBE a try. You might be surprised at how much it improves your shotgun’s performance. Invest in your hunt; upgrade your choke!